Complete sawmill (stationary)

Wood-Mizer HR500

Condition: used, Year of construction: 2013, operating hours: 8,682 h, axle configuration: 4x4, power: 164 kW (222.98 HP), maximum speed: 80 km/h, first registration: 04/2013, color: orange, empty load weight: 8,293 kg, maximum load weight: 5,707 kg, overall weight: 14,000 kg, number of seats: 2, gearing type: other, mileage: 159,883 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, front linkage, front power take-off, front-end loader, onboard computer, power assisted steering, traction control, trailer coupling, * German vehicle * First owner * Condition, see photos * Original: only 8,682 operating hours * Front and rear PTO * Municipal hydraulics at the front and rear * Front mower * Mulag boom MRS300 * Mulag verge mowing head RMK1200 * Rear mower * Mulag rear boom MHS800 * with Mulag mowing head MK1200 * Municipal and rear hydraulics * Rear linkage * Mulag verge mowing unit MRS 300 * Ideal for mowing in areas near roads, operating on the left and right sides * 3-point attachment to the front linkage * Reach up to 3.00 m * Drive via front PTO * Control: electro-hydraulic * Mowing head relief * Distance-dependent feeler automation * Verge mowing head RMK 1200 * Working width 1,200 mm * Telescopic rear boom mowing unit MHS 800 * Lateral displacement 1,600 mm * Reach, left and right 8.70 m * Automatic ground sensing * High portal for driving over obstacles up to 3.90 m * One-hand control panel with multi-function lever * Quick-change device * Mulag flail mowing head MK 1200 * Overall width 1,580 mm * Boom utilization * Comfortable cabin with 2 seats * Air conditioning * Windshield heating * Outside temperature display * Comfortable driver's suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * All-round warning lights * Wide-angle warning beacons * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Top speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg * LOF approval * In the event of a sale to commercial businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Prjdjvhqbcepfx Akisc Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer a viewing and inspection of the goods so that no false impressions arise regarding their condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicle. Subject to change, prior sale and errors.

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Prsdpfxoxfvh Ss Akisc

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW Podscl Svvspfx Akijrc -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Prodpfjhpbthox Akijc Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: excellent (used), functionality: fully functional, Kiremko, Agrico Potato Peeling Line Comprises: - Kiremko Steam Peeler: With feed hopper: approx. 2400 x 3000 x 6000 mm Equipped with feed screw conveyor: length approx. 6000 mm - Agrico Two-Way Peeler: Equipped with screw conveyor - Double-Brush Machine (Type AT-OBC-2500): Working length: 2500 mm Equipped with screw conveyor Pedpfx Akeyku Hroiorc - Discharge system and filtration: Discharge screw conveyor: length 2500 mm Collection tray / filtration unit with pump: approx. 1550 x 1070 x 1160 mm Platforms are not included A complete, industrial-grade potato peeling line constructed entirely from stainless steel, designed for high-capacity processing. The system utilizes state-of-the-art Kiremko steam peeling technology, which, when combined with the two-way Agrico peeler and brush machine, ensures maximum raw material cleanliness with minimal product loss. An extensive system of screw conveyors guarantees fully automated material flow between processing stages. The line is equipped with its own filtration and water recovery system featuring a high-performance pump, enabling operational cost optimization.

Condition: like new (used), Year of construction: 2005, I sell the vertical band saw mill Primultini SGD, Year 2005, line almost with zero working hours. Canali carriage mechanic + pneumatic. Compressor with air tank included. Sharpening workshop included. Condition like new. Pjdpezkb R Nsfx Akierc Available immediately.

Year of construction: 2005, condition: excellent (used), The subject of the auction is the sawmill line BRODPOL The line consists of a log prefeeder plus a cascade, an input feeder, a BRODPOL TT5/500/320/G circular sawmill with a centering device and a receiver, and a distribution table. - diameter of the processed log 100 - 320 mm - length of processed log 1250 mm - 6000 mm - diameter of circular saws (only) 500 mm - maximum number of saws on the spindle 5 pcs. - feed speed 10 - 28 m/min. Prsdpfxol H Hy Hj Akiec - power of main motors 55 kW + 75 kW Hcwgak9s - required connection of pneumatic supply 6 atm. - capacity up to 20 m³ per hour of operation

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg Prsdpfx Akoztgl Dsioc ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: like new (used), functionality: fully functional, SURDRY 6-Cage Oscillating Autoclave – Industrial Sterilization SURDRY oscillating autoclave with a capacity for 6 cages, designed for the sterilization and thermal treatment of packaged food products in industrial batch processes. The equipment incorporates an oscillating load movement system during the thermal cycle, allowing the packages to be kept in controlled motion during specific phases of the process. This technology is particularly beneficial for products where agitation can promote heat transfer and reduce process times, depending on the product, format, and recipe. Its 6-cage configuration provides a high processing capacity for continuous production industrial facilities. MAIN FEATURES -Manufacturer: SURDRY -Type: Industrial oscillating autoclave -Capacity: 6 cages -Application: sterilization / pasteurization -Oscillating load movement system -Batch thermal treatment -Horizontal chamber -Industrial construction in stainless steel -Large-diameter front door Prjdpex Tiliofx Akisc -Safety locking system -Motorized drive of the oscillation system -Control of cycle parameters -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The SURDRY 6-cage oscillating autoclave is designed to perform controlled thermal treatments on previously packaged products. The loaded cages are placed into the chamber, and once closed, the programmed cycle is carried out through different phases of heating, thermal maintenance, and cooling. During the treatment, the system allows for the application of a controlled oscillating movement to the load. Depending on the product, this agitation can improve internal circulation and promote faster and more uniform heat transfer. It can be integrated with: -Automatic loading and unloading systems -Cage conveyors -Basket loaders and unloaders -Cage transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial pasteurization or sterilization processes. Depending on the configuration and process, it can work with cans, jars, trays, pouches, and other packaging suitable for thermal treatment in an autoclave. The combination of SURDRY technology, oscillation system, and 6-cage capacity provides a particularly interesting solution for high-capacity industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Juice Mixing and Preparation Line with Homogenizer – Stainless Steel Industrial line for mixing, preparation, and homogenization of juices, designed for the production and conditioning of juices, nectars, fruit beverages, and other liquid or semi-liquid products. The installation consists of several stainless-steel process tanks, mixing systems, sanitary piping, pumps, instrumentation, and a homogenizer, allowing for various product preparation operations to be carried out within a single unit. Homogenization reduces and more uniformly distributes the particles present in the product, helping to improve its stability, texture, and consistency, and reducing the tendency for phase separation, depending on the formulation. MAIN FEATURES -Type: Juice mixing and preparation line -Application: Juices, nectars, and beverages -Several stainless-steel process tanks -Tanks with mixing systems -Integrated homogenizer -Product mixing and homogenization -Circulation and transfer system -Sanitary pumps -Process piping and valves -Pressure and temperature instrumentation -Batch preparation and formulation -Possibility of product recirculation -Construction primarily in stainless steel -Hygienic design for the food industry -Unit mounted on a common frame -Integrable with thermal treatment and filling systems PROCESS Pedpfx Akjx S E E Asijrc The different ingredients or base products are introduced into the preparation tanks, where mixing, dissolution, ingredient incorporation, and conditioning operations can be carried out. Subsequently, the product can circulate through the homogenizer, where it is subjected to a mechanical treatment designed to reduce and uniformize the size of the particles or dispersed phases. Depending on the formulation and installed configuration, the system can be used for: -Preparation and mixing of juices -Production of nectars -Mixing of different concentrates or pulps -Ingredient incorporation -Homogenization -Suspension stabilization -Reduction of phase separation -Pre-treatment before thermal processing -Feeding filling lines APPLICATIONS Especially suitable for manufacturers of juices, nectars, fruit beverages, liquid purees, and other food beverages that require a versatile installation for preparation and homogenization. It can be used with products containing pulp or suspended particles, subject to the characteristics of the product and the configuration of the homogenizer and other installed equipment. The line can subsequently be integrated with pasteurizers, sterilizers, heat exchangers, aseptic tanks, and filling systems. Machine available for inspection. Additional technical information, capacities, dimensions, additional photographs, or videos can be provided upon request.