Used Weber Cr 6 for sale (107)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical Details X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm B-axis (table): 360,000 x 0.001° deg Head swivels +/- (HV): 360,000° deg Pallet size: 1000 x 800 mm Table load capacity: 3000 kg Tool holder: SK 50-B Maximum spindle speed: 8000 rpm Gear stages: 2 Spindle motor (100/40% duty cycle): 37/50 kW Flow rates x/y/z - infinitely variable: 30,000 mm/min Total power requirement: 100 kVA Machine weight: approx. t Space requirement: approx. 11555 x 7998 x 5050 mm Additional information: Universal 5-axis machining center Simultaneous Original purchase price: EUR 1,295,000 The machine was commissioned as a new machine in September 2011. A geometry measurement report dated August 30, 2025, is available. RTCP functionality is available. Siemens refers to this as TRAORI (Orientation Transformation). TRAORI is activated and configured. Equipment: Siemens 840 D Solution Line CNC control Separate wired hand-held control unit, Siemens HT-2 Dual pallet changer with safety light curtain 330-position tool changer (max. tool length 600 mm) with second Siemens 840 D control panel Ksdjx Uxh Aopfx Adtswt Tool cone cleaning system Special cabin with oil mist extraction system Coolant tank 3,300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Operating instructions Spare part: Unused ball screw Note: The machine is sold without tool holders, tools, and clamping devices.

Condition: good (used), Joint cutter, asphalt cutter, concrete cutter -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Engine: Robin EH25D 8 hp Kwodpfxjdp Dvts Adtet -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 Kjdpjv Tahiofx Adtewt -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Condition: good (used), Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP Kedpfx Aedp Dvpedtewt -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm Kwsdpfx Aob A I Hiodtot -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Year of construction: 2000, condition: used, Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg Ksdpfxehx E Uke Adtewt -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Kedsx Rx D Aopfx Adtswt Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Kwodpfx Ajku Aw Njdtot

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Kwedpfx Aoi D Upkedtjt

Condition: used, mileage: 1 km, power: 9 kW (12.24 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 587 kg Ksdpfsx R T H Sjx Adtswt Please contact Emal Jaweed for more information

Condition: new, Year of construction: 2023, For inquiries regarding the machine, Mr. Herden will be pleased to assist you (by phone at ...). Kwjdpfx Aoiadxcsdtjt Sales price: €1,990 net / €2,368.10 gross Shipping available. The SRV 590 Vibratory Rammer – Powerful and Lightweight Its low weight (62 kg) makes transportation and on-site handling easier. At the same time, you can rely on the robust construction of the SRV 590. Features: - Balanced operation and low hand-arm vibrations allow for fatigue-free work. - Durable and powerful tamping system. - Honda GXR 120 four-stroke petrol engine with low emissions. - Oil sensor checks oil pressure at start-up and prevents engine from starting if oil level is low. - Effective multi-stage air filtration system with cyclone pre-separator protects the engine from contamination. - Fuel line and/or tank filter cleans the fuel. - Throttle lever with locking positions for full throttle, reduced speed, idle, and engine stop/fuel shut-off. - Maintenance-free tamping foot. - Easy to transport with carry handles and rollers. - Operating hours counter as standard. Technical Data Operating weight: 62 kg Shoe width: 28 cm Blow rate: 700 strokes/min Engine: Honda GXR 120 (4-stroke petrol) Engine power, max.: 2.6 kW (3.6 hp) We are an official Weber distributor with over 80 Weber-MT compaction plates in stock. We are also a Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Subject to prior sale and errors excepted.

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Ksdpfx Adjx Dxq Hjtewt

Condition: good (used), Year of construction: 2007, Weber ASB 560 Skinning Machine A machine like no other! A robust, high-performance machine for industrial use.  The Weber ASB 560 – premium quality – is a true industrial workhorse. The machine is equipped with a cleaning mode, allowing for thorough and effective cleaning. It's highly efficient, has a long lifespan, and is relatively easy to maintain. Manufacturer: Weber Model:ASB 560 Year:2007 Belt Widt:500 mm Kwedpex Ap E Eefx Adtet Power:50Hz / 400V / 1,1kW Machine Dimensions LxWxH:2.100x1.000x1.250 mm Machine Weight:400 kg.

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Ksdpfx Adodzp S Rjtowt Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Weber TRC 86 – Trench Roller – Year of manufacture: 2020 – with radio remote control – 112 operating hours Price: €16,890.00 net / €20,099.10 gross Operating weight according to CECE: 1,390 kg Drum width: 854 mm Compaction force: 75 kN Frequency: 32 Hz Amplitude: 1.70 mm Average static line load CECE: 9.80 kg/cm Gradeability: 50%, depending on ground conditions Working/travel speed: m/min, depending on ground conditions Drive system: hydrostatic, four drums Kwedpsq A Ax Ajfx Adtot Engine manufacturer/type: Lombardini LDW 1003 Engine type: 3-cylinder diesel, water-cooled Engine power, max.: 19.5 kW / 26.7 HP Engine power at operating speed: 15.6 kW / 21.3 HP at 2,600 rpm The machine features a radio remote control. The control unit is charged directly in the roller. We are an official Weber sales and service partner, Seppi M. sales and service partner, and also represent the brands DMS, Magni telehandler sales and service partner, JCB construction equipment sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted!

Year of construction: 2005, condition: like new (used), WEBER MSG 460-5 ID.NO. 2553 Weber MSG 460-5 knife sharpener for sharpening round blades for slicers.. Dimensions 55 x 60 cm H 75 cm. Kodpfopcf Hiex Adtewt

Year of construction: 2007, condition: repair required (used), trench roller Weber TRC 86, year 2007, 711 working hours, weight 1390 Kg, Lombardini Diesel 19,5 KW, ser.no.7000003, roller runs and shakes, brake on the right side does not release Kwjdeiffk Tjpfx Adtot

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Kedpfx Adoif Rvajtjwt

Condition: good (used), Year of construction: 2006, functionality: fully functional, total length: 2,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 450 kg, input voltage: 400 V, input frequency: 50 Hz, Skinning and strip cutting machine Brand Weber, Model ASL 560 Number: 110, Year of construction: 2006, Voltage 400 V, 50 Hz, Power 1.1 kW, Weight: 450 kg, plastic belt, belt width: (1x) 500 mm, (1x) 300 mm, 17 knives, distance between knives: 30 mm, overall dimensions: 2200 mm x 1300 mm x 1800 mm. Includes additional parts and knives. Kedpfxjv Abyle Adtswt

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Battenfeld R200/6 Battenfeld V125 Kodovryhyopfx Adtjwt

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Kwedpoyciydsfx Adtjt Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Kedpfx Adjx U A Iastewt

Condition: excellent (used), Year of construction: 1983, operating hours: 87,618 h, functionality: fully functional, machine/vehicle number: DS 85610, overall weight: 4,000 kg, total length: 5,200 mm, total width: 1,700 mm, total height: 2,500 mm, power: 75 kW (101.97 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 160 A, Original WEBER 8.8 extruder with extended barrel to model 8.22. Comes with new and original screws from Weber. HMI control panel, previously used in a cleanroom environment. Includes hopper. Machine is offered as is. Kwodpfox Apckex Adtet

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Kedpfx Adeya H Hcstswt Six machines available in total. Further details on request. Payment by cash or advance bank transfer. Sale to commercial buyers only, no warranty or guarantee.

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm - Ratio: 20 L/D Kwodpfx Adjq Tr Tbjtjt