Used Weber Cf 4 for sale (93)

Condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! Dedeh T A Tnepfx Afnsun With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Duodoyhcabopfx Afnjn Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 216 h, functionality: fully functional, Equipment: documentation/manual, A reconditioned and functional profile line for rigid PVC-profiles (500 x 100 mm), consisting of: Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard powder Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx.30 rpm Screw torque: 10000 Nm Motor power: 3.8 - 23.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers PMA KS40 Accessories: Mass pressure sensor and mass temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Total weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: recondition and checked for function Vacuum Calibration Unit Manufacturer: Blake Kunststoffproduktionsanlagen Type: 203-3-4,0 Year of manufacture: 1997 Serial number: 758 Total length: 5600 mm Vacuum pumps: 3 x 5.5 kW Longitudinal adjustment: electromotive Height/lateral adjustment: front and rear via threaded spindle and handwheel V2A tub: interior/exterior width: 450/700mm, length: 4500 mm Connected load: approx. 20 kW Total weight: approx. 3.000 kg Condition: recondition and checked for function Caterpillar Haul-Off Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Pads width: 300 mm Passage width: max. 500 mm Passage hight: 100 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function Profile cross-section, max.: approx. 500 x 100 mm Note: The vacuum calibration unit, including caterpillar pull-off, can also be purchased separately. Dusdpfjyhckaex Afnjn

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm Duodpfxov Tahij Afnen -Weight: 8.7 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece Dodpfxjw Dbkro Afneun

Condition: good (used), functionality: fully functional, Offered for sale is a Weber derinder, model AS 450, 400V / 16A / 0.4kW. The machine is fully functional and immediately ready for operation. Cutting width approx. 39 cm. New blade installed. Inspection and trial run possible. Six machines available in total. Dujdpfx Afjya H Hcjnsn Further details on request. Payment by cash or advance bank transfer. Sale to commercial buyers only, no warranty or guarantee.

Year of construction: 2022, condition: used, For inquiries regarding the machine, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of manufacture: 2022 / Electric start / DEMO unit Sales price: €10,090.00 net / €12,007.10 gross Warranty until 10 / 2026 Technical data Engine: Hatz Diesel Max. engine output: 11.0 (15.0) kW/hp Weight: 740 kg Duedpfx Afjyfvidjnsn Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors of the CR series are distinguished by their high compaction performance and superior efficiency. They are the first choice for compaction jobs ranging from traditional road and civil engineering to paving work. Balanced running properties, high smoothness, and low hand-arm vibration ensure maximum operating comfort. - Precise, stepless, electro-hydraulic changeover between forward and reverse via tip control - Engine protection system - Throttle and hydraulic control lines protected within the guide bar - Low hand-arm vibration - Fatigue-free operation with adjustable-height steering handle - Protection for machine and engine through frame guard and full engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service: all maintenance components are easily accessible - Safe and quick loading via large, foldable crane eye - Secure lashing for transport with additional lashing points in the engine console - Increased operator comfort with electric start, hour meter, engine oil, and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, landscaping, subbases for paving, compacting pavers, and compacting sand, gravel, or crushed stone We have a large selection of various vibratory plates in stock, available for immediate delivery! Simply contact us at ... for more information. Upon request, we are happy to provide you with a financing offer. We are an official Weber MT sales and service partner We are an official JCB construction equipment sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT product range! Subject to prior sale and errors! Internal No.: 080682 = More information = Contact Tobias Ebert for more information.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 9 WSA Hatz Diesel Vibratory Plate / Electric Start / New machine / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3 years manufacturer's warranty Technical Data Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/HP Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) Duodpfjyfvaisx Afnon - Evaluates signals from the machine's integrated sensors and displays them graphically using symbols - Similar to the previous engine protection by Weber MT, the engine shuts off whenever continued operation could cause engine damage - The user is also shown, via symbols, how to remedy the displayed fault - If the air filter is too dirty, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also includes COMPATROL compaction control, now in a new design - It displays the compaction progress to the user via a clear and easy-to-read bar graph - Machine operation has also changed: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine automatically regulates the correct speed The reversible soil compactors of the CR series stand out for their powerful compaction performance and highest efficiency. They are therefore the first choice for compaction works in road and civil engineering as well as paving. Balanced running characteristics, high operating smoothness, and low hand-arm vibrations ensure excellent operator comfort. CR 9 Economical machine with strong compaction performance: - Infinitely variable forward and reverse travel, hydraulic switching - Throttle and hydraulic switching integrated and protected in the guide handle - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection via engine guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy servicing, as all maintenance components are easily accessible - Safe and quick loading via large foldable crane eye - Secure transport with additional lashing eyes on the engine console - Improved operator convenience with electric start - Application areas: road and civil engineering, paving, and, due to the low overall height and working width, the CR 9 is also ideal for use in trench shoring We have a very large selection of various vibratory plates in stock and immediately available! Mr. Herden (Tel. ...) will be happy to assist you. We are also happy to provide you with a financing quote on request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 7 WSA Hatz Diesel Reversible Plate Compactor / Electric Start / New machine / In stock & immediately available Sales price: €9,390.00 net / €11,174.10 gross 3-year manufacturer’s warranty Technical Data Engine: Hatz Diesel Max engine output: 7.9 kW (10.7 hp) Weight: 484 kg Centrifugal force: 65 kN Frequency: 74 Hz Working width: 65 cm Weber Smart Assist (WSA) - Evaluates signals from the machine’s internal sensors and displays them graphically using symbols - Similar to previous engine protection on Weber MT units, the engine will automatically shut down if continued operation could cause engine damage - The operator is also shown symbols indicating how to rectify any displayed faults - If the air filter becomes heavily soiled, step-by-step instructions are shown for cleaning and replacing the filter element - The Weber Smart Assist also includes the newly redesigned COMPATROL compaction control - It provides a clear and easily understandable bar graph to display compaction progress - Operation of the machine has also been updated: following engine start, vibration is activated at the push of a button - The usual throttle lever is no longer required, as the engine speed is regulated automatically The reversible plate compactors of the CR series impress with their powerful compaction performance and maximum efficiency. This makes them the first choice for all compaction tasks from classical road and civil engineering to paving work. Well-balanced running characteristics, exceptionally smooth operation, and low hand-arm vibrations ensure high operator comfort. CR 7 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle and hydraulic switching cables routed inside the guide bar for protection - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide bar - Protection for the machine and engine due to engine guard frame and cover - Reduced maintenance thanks to the self-tensioning centrifugal clutch - Simple maintenance with all service points easily accessible - Safe and fast loading due to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing eyes on the engine console - Greater operating comfort with electric start - Typical applications: road construction, civil engineering, paving; thanks to its low overall height and working width, the CR 7 is also ideally suited for trench shoring We have a wide selection of different vibratory plates in stock for immediate delivery! Mr. Herden (Tel. ...) will be happy to assist you. On request, we are happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. Dsdpfsyfqvrox Afnoun We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 6 WSA Hatz Diesel Vibratory Plate / Electric Start / New Machine / In Stock & Immediately Available Dodjyfqp Sjpfx Afnoun Sale price: €8,990.00 net / €10,698.10 gross 3-year manufacturer warranty Technical Data Engine: Hatz Diesel Max. engine output: 7.9 kW (10.7 hp) Weight: 428 kg Centrifugal force: 55 kN Frequency: 72 Hz Working width: 59 cm Weber Smart Assist (WSA) - Evaluates signals from the machine's sensor system and graphically displays them as symbols - Similar to the previous engine protection system from Weber MT, the engine will shut down whenever continued operation could lead to engine damage - Users are also shown symbols indicating how to resolve displayed faults - If the air filter is excessively dirty, it provides step-by-step instructions on cleaning and replacing the filter element - The Weber Smart Assist also includes the compaction control "COMPATROL", now with a new design - It displays the progress of compaction on an easily readable and understandable bar graph - The machine’s operation is also improved: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engines automatically adjust to the correct speed The reversible soil compactors of the CR series excel with powerful compaction performance and maximum efficiency. They are the top choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running characteristics, low running noise, and minimal hand-arm vibrations provide a high level of operator comfort. CR 6 Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic shifting - Throttle cable and hydraulic shifting lines routed and protected inside the guide bar - Low hand-arm vibrations - Fatigue-free operation with height-adjustable guide handle - Machine and engine protection with motor guard frame and engine cover - Reduced maintenance thanks to self-tensioning centrifugal clutch - Easy service—maintenance points are easy to access - Secure and fast loading using a large, foldable crane eye - Safe lashing for transport thanks to additional lashing points on the engine console - Enhanced operator comfort with electric start - Areas of use: road and civil engineering, paving, and—thanks to the low height and working width—the CR 6 is also ideal for trench shoring work We have a very large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. We would also be pleased to provide a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, Weber Skinner Model ASE 400 Year 2005 Duodpfxowdyd De Afnon 400mm stainless steel skinner roller CE approved

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Djdpfxjx Dxq Hj Afnjun

Year of construction: 1997, operating hours: 58,668 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 042 Screw type: single screw Duodpetpg Dnjfx Afnsn Year of construction: 1997 Propeller Ø: 75mm Working hours: 58,668

Year of construction: 1997, operating hours: 76,200 h, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1997 and is in great condition. Make: Hans Weber GmbH Model: NE 7 048 Dodpfx Aetpg D Usfnsun Screw type: single screw Year of construction: 1997 Propeller Ø: 75mm Working hours: 76,200

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Dusdpfx Afexf Up Uenen Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Dsdpfjua E H Sex Afnsun - Suitable for single wall pipes up to 220mm

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Duedpfx Aodzp S Refnsn Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: new, Year of construction: 2024, Facility managers and property managers know the problem: On the due date, i.e. when the garbage truck empties the garbage cans, all the garbage cans must be at the collection point. If the garbage cans are normally in the underground garage, the caretaker has to janitor has to take all the garbage cans up the ramp of the underground garage. up the ramp. This is time-consuming and exhausting or even impossible impossible. A 240 kg garbage can filled with waste paper can weigh over over 200 kg, a 1100 liter waste container even weighs over a ton. even over a ton. If this is the case, the janitor needs the help of a second person. This is cost-intensive. Weber offers time and health-saving solutions to this problem. problem. Talk to us about our waste garbage can frames for 1100 liter waste containers and our waste garbage can trolleys for 120 and 240 liter garbage cans. By the way, battery-powered towing vehicles are of course also available from us. gentle on health effective 400 kg payload galvanized can be coupled together Dedpfei Nnrujx Afnjun Professional device - not for public road traffic Adapter: Ball head Trailer hitch

Year of construction: 2005, condition: like new (used), WEBER MSG 460-5 ID.NO. 2553 Weber MSG 460-5 knife sharpener for sharpening round blades for slicers.. Dimensions 55 x 60 cm H 75 cm. Dsdpfspcf Hijx Afneun

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SK144, Weber blade head, unused, new! New price at Weber: approximately €18,000!!! Dujdowk H D Rjpfx Afnon Weber SK144 blade head, unused, new. New price at Weber: approximately €18,000!!!

Year of construction: 2018, condition: like new (used), Weber screwing system: - Screw bunker with orientation and feeding system - dosing system - pneumatic feeding system - screwing gun - festo pneumatic gun travel operation system - frequency regulator 4 complete, barely used, systems for sale. Price is per set / negotiable. Screwing gun heads can be changed and adapted for multiple different types of screws. Contact for more information. Djdpsif Rvaefx Afnjun

Condition: good (used), functionality: fully functional, Program-controlled automatic grinding device for wet-ginding of sickle shaped Weber-knives (max. blade length 650 mm) angular adjustment of grinding disc 22°, 26°, 28° and 32° including cam disk for Weber sickle knives with a distance centre of rotor to cutting edge R400 mm (70311822) Dujdpfx Afsxxt T Eonen Technical Data: Model: SSG 400 Sharpening disc 50 x 25 x 20 mm Grinding disc 100 x 40 x 50 mm Drive: Transmission-brake-motor Electric: 400 Volt, 50 Cycles, 0,25 kW, 16 A Dimensions: 1.100 x 510 x 1.770 mm (W x D x H) weight: 300 kg

Condition: good (used), WEBER tube extrusion line including: WEBER DS 8.5 Elmepla saw Dsdsvryhyspfx Afnsun Battenfeld R200/6 Battenfeld V125

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm Djdsydmkpspfx Afneun table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: good (used), Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m Dodpsb A Sxgefx Afnjun -Weight: 72 kg -Functionally tested