Used Weber Srv 62 for sale (105)

Condition: new, Year of construction: 2023, Sales price: 1,990¤ net / 2,368.10¤ gross Shipping possible. The SRV 590 vibratory rammer - the strong lightweight Its low weight (62 kg) makes it easier to transport and work on the construction site. At the same time, you can rely on the robust construction of the SRV 590. Features: - Balanced running behavior and low hand-arm vibrations enable fatigue-free work. - Durable and powerful rammer system. - Four-stroke GXR 120 petrol engine from Honda with low pollutant emissions. - Oil sensor checks the oil pressure when starting and prevents the engine from starting if there is a lack of oil. - Effective, multi-stage air filter system with cyclone pre-separator protects the engine from contamination. - Line and/or tank filters clean the fuel. - Throttle lever with locking steps for full throttle, reduced speed, idling and engine stop/fuel shut-off. - Maintenance-free tamping foot. - Easy transport with handles and rollers. Dodpfx Aheiadxcouecp - Operating hour meter as standard Technical data Operating weight: 62 kg Tamping foot width: 28 cm Impact rate: 700 rpm Engine: Honda GXR 120 (4-stroke petrol) Engine power, max.: 2.6 kW (3.6 HP) We are an official Weber sales partner with over 80 Weber-MT vibrating plates in stock. We are also a Magni telescopic loader sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and one of the largest commercial vehicle dealers in Germany with 800 used vehicles. We supply the complete Weber MT range for you! Errors and prior sale reserved.

Condition: used, functionality: fully functional, fuel type: gasoline, overall weight: 32 kg, DGUV certified until: 03/2026, Year of construction: 2018, machine/vehicle number: 20008074, Equipment: UVV, Specifically designed for compaction of pipe collars in trenches. Other areas of application: compacting edge zones of walkways; installation of drainage systems. Due to its low weight, it is easy, flexible, and safe to operate even on slopes and in very confined spaces. Dodpsxpu Tbjfx Ahujcp

Condition: used, Floor cutters, asphalt cutters, concrete cutters -Saw blade: Ø 360 mm Dcodpsdp Dvtsfx Ahujp -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Condition: used, Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm Dedpjdp Dvpefx Ahuocp -Weight: 100 kg

Condition: used, Weber Loading Conveyor Dodpfextfz Rox Ahuocp Model CZB Stainless steel

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Dcodpfx Aexu U Trehujp Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Year of construction: 1993, condition: used, Cutting depth 220 mm weight of the machine ca. 375 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dcodew Syibepfx Ahuep

Condition: good (used), functionality: fully functional, Offered is a Weber brand belt deskinner, Model: ASB 800, 400V, 16A, V2A. The machine is fully functional and ready for immediate use. Cutting width approx. 40 cm. The machine is in full working order and ready to operate immediately. Further details available upon request. Payment by cash or advance bank transfer. Dcsdpfx Aoxt Rptshuep Sale to businesses only, no warranty, no liability.

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Manhole cylinder NW 600; small sheet cut-outs in the insulation jacket Outer diameter: 3,200 mm Inner diameter: 3,000 mm Total length: 12,300 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 250 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 1.5 bar Support type: feet Location: Bremen Technical documentation: Drawing Nameplate: Vacuum: 0.2 bar Volume: 60,000 liters Double-jacket volume: 105.0 liters Cylinder wall thickness: 5 mm Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 9,000 mm Previous application: rapeseed oil TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom tempering: half-pipe coil Djdpfx Aoxqb Rvjhuecp INSULATION Insulation jacket: bolted Insulation material: mineral wool Insulation jacket material: aluminium EQUIPMENT Manhole / dome: in cylinder, in top head, in top head (DN 600) Outlet: flange DN80 Note: dents in the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Heating/cooling system material: V2A 1.4301 (AISI 304) Foot material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 7 mm

Year of construction: 2016, operating hours: 35,000 h, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder Ø107mm 22LD Dodouxc R Iopfx Ahuocp - Manufacturer: WEBER - Type: DS 11 - Year: 2016 - Double parallel screws ø107mm 22D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 78kW - Up to 400kg/h profile - 700kg/h tubes - 35.000 hours in operation

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand SIEMENS Model Sinumerik 840C Main Drive Spindle speed range 6000 Tool taper SK50 Movement X-Axis Movement 1200 mm Y-Axis Movement 800 mm Z-Axis Movement 800 mm Tools Max tool length 750 mm Dcjdoxqta Njpfx Ahujp This Burkhardt-Weber MC 80 was manufactured in 1998. It features a spindle speed of 6,000 rpm, a maximum feed rate of 25 m/min, and a tool capacity of 80 with SK50 adapters. The CNC Siemens Sinumerik 840C control system enhances its precision. Consider the opportunity to buy this Burkhardt-Weber MC 80 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Dcjdovgnr Aspfx Ahuop - Hydraulic pump.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm Dcodpfxsltrg Se Ahusp x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: DS 70 087, WEBER DS 7.22 Twin Screw Extruder Dsdpfxjxghz Hs Ahuocp

Condition: used, tank capacity: 630 l, GENERAL Design: suspended Notes: Support ring and vessel flange made of steel; handhole cover plated Inner diameter: 1,000 mm Total height: 2,000 mm Heating/Cooling: yes Max. permissible operating temperature: 300 °C Max. permissible operating overpressure: 32.0 bar Max. overpressure: 6.00 bar Top head: removable / hinged top head Agitator: anchor agitator Support type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 630 liters Jacket volume: 14.5 liters Cylinder wall thickness: 7.8 mm Jacket material: V4A 1.4571 (AISI316) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 800 mm Previous application: Chemicals VESSEL Max. vessel operating temperature / °C: 300 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil FEATURES Manhole / dome: handhole Outlet: flange DN50 AGITATOR Agitator placement: centered in the top head Agitator configuration: motor/gear unit missing TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 15.3 mm Djdpfx Ahexqba Djuecp Top wall thickness: 15.8 mm

Condition: used, Weber Skinner Dcodswdyd Depfx Ahujp Model ASE 400 Year 2005 400mm stainless steel skinner roller CE approved

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Dcedpoxlcfksfx Ahujp Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. Dcjdpfxevgntto Ahujp - Hydraulic shears. - Arm spreader. - Hydraulic pump.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Djdpfx Ajxf Up Uehuocp Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Dodoku Aw Nspfx Ahuecp Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, tank capacity: 10,875 l, GENERAL INFORMATION Features: Crane lugs Design: Suspended Remarks: Support ring made of Fe; in some areas, the previous operator welded stainless steel plates to the inside of the top flanges (with some of these plates cut open again; see photos); manway diameter 480 mm Speed: 78 rpm Dsdpexqa Nwefx Ahuscp Internal diameter: 2,170 mm Total height: 5,050 mm Heating/cooling: available Power: 22 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Shaft seal: Mechanical seal with thermosiphon vessel Agitator: Anchor agitator Support type: Ring Location: Bremen Jacket temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 10,875 liters Jacket volume: 330.0 liters Cylinder wall thickness: 8.7 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V2A 1.4541 (AISI 321) Condition: used Cylindrical height: 2,200 mm Last application: Adhesives industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum for jacket / shell side / bar: 1.0 bar Bottom temperature control: Half-pipe coil FEATURES Manway / dome: on top head Discharge: available Discharge (alternative entry): 100 mm Note: light residues, manway cover missing MATERIAL SPECIFICATIONS Flange material: Steel AGITATOR Agitator manufacturer: Ekato Voltage: 230/400 volts Agitator positioning: centrally in the top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 11.4 mm Top wall thickness: 14 mm

Condition: excellent (used), Weber Maschinenbau GmbH mobile outfeed belt Type: CCE Number: 2705 Dcedpfxev T Aq To Ahuep Year of construction: 08/2008 Belt width: (2x) 420 mm Total dimensions outfeed belt: 3160 mm x 1320 mm x 1480 mm.

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm Dedeqpft Ijpfx Ahuscp - Working hours: 102.364

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. Dcedpfxovgnhwo Ahuop - Arm spreader. - Hydraulic pump.

Year of construction: 2022, condition: excellent (used), Weber Compact CC Labeller Applicator Dcjdpfx Ahotq E Rkoujp Complete with controller Year - November 2022 In excellent condition