Used Weima Wl 6 for sale (16)

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Laodpfx Ajh Eiw Iepmod Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Ljdpjh Hnp Dsfx Apmead Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder, Type WL 6 Power: 18.5 kW Our WL 6 machine concept: The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer remnants, etc.) into fuel chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Laedjcbtpkepfx Apmed Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 RPM Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) - Star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox limit switch - Presser bar - Very robust Weima WAP gearbox Recommended accessories - Log spacer (free-cutting hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Hydraulic material pusher Manual and automatic operation Lsdpoznnf Uefx Apmjad Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Ledpfx Apoy D E Tdemead

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW Laedpfszh H T Dex Apmod - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Main specifications: Motor power: 30 kW Rotor: Ø370 × 800 mm Rotor speed: 100 rpm Lasdpfx Apszhbdksmod 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Main specifications: Motor power: 30 kW Rotor: Ø370 × 800 mm Rotor speed: 100 rpm Laedpozhbbvsfx Apmsd 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: used, Year of construction: 2011, WEIMA WL 6 S 30 kW – Single-Shaft Shredder For sale: WEIMA WL 6 S industrial single-shaft shredder with a 30 kW motor. A robust, German-made machine designed for continuous industrial operation. Lsdpfx Aszha Syopmjad Main specifications: Motor power: 30 kW Rotor: Ø370 × 800 mm Rotor speed: 100 rpm 42 reversible cutting knives Hydraulic ram feeding system Interchangeable screens (10–60 mm) Weight: approx. 2,600 kg The machine is ideal for shredding wood, MDF and particle boards, plastics, paper, cardboard, and various types of production waste. The machine is available for inspection and test runs. Additional photos and a video of the machine in operation are available upon request.

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Lsdpfx Apoivpttomoad

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Lasdpfx Aswzg Taspmjd

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher of the German company WEIMA - overhauled - year of production 1992 - documentation Ledsuditwepfx Apmsad TECHNICAL PARAMETERS: hopper dimension 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main motor 22 kW number of knives 19 pieces rotating cutting knives 30 mm x 30 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER height of pressing drawer 275 mm diameter of spigot fi 200 mm overall dimensions of the machine (length / width / height) 210 / 160 / 180 cm weight 1600 kg

Condition: excellent (used), Year of construction: 1993, WEIMA WL 6 A wood chipper Crusher by the German company WEIMA - after the technical review - very good condition - year of production 1993 - documentation Lasdpfx Apsgxuvtsmed TECHNICAL PARAMETERS: hopper dimensions 800 x 1000 mm rotor diameter 175 mm rotor length 800 mm 18.5 kW main engine number of knives: 18 pieces rotatable cutting knives 30 mm x 30 mm HYDRAULIC DRAWER CHIPPER EQUIPPED BY AUTOREWERS V-rotor 12 mm and 10 mm sieve rotor speed 90 rpm spigot diameter 200 mm height of the pressure drawer 175 mm dimensions (length / width / height) 230 x 140 x 160 cm weight 1400 kg

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Ledpfsivpthjx Apmead

Condition: used, total length: 2,100 mm, total height: 1,730 mm, total width: 1,700 mm, Colour: Red Empty weight: 1.500 kg Price: On request - Details: - └ Description: 400 volt recording 45 A Fuse 63A - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 500-3752 Lajdpfxezhtm Dj Apmjd - Main motor power [kW]: 18,5 - Rotation speed [rpm]: 90 - Hydraulic unit power [kW]: 0.8 - Oil tank capacity [L]: 20 - Rotor width [mm]: 800 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 700 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 21 - Transport dimensions: 2100mm x 1700mm x 1730mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Weima WL6 wood chipper 18.5kW engine rotor length 800mm, 21 knives on the rotor, hydraulic hopper, automatic reverse function Ljdszkqnqepfx Apmsad 15mm screen at the bottom and 20mm screen at the top Machine has undergone inspection, in very good condition Weight approximately 1500kg