Used Weinig Unicontrol 6 for sale (546)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 035-804, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Year of manufacture 1996, the latest tools were acquired in 2024. Production of wood and wood-aluminum windows. Oppold IV67 mm wood and wood-aluminum. Also production of entrance doors and lift-and-slide doors. The production line is still fully assembled and functional. Additional tools: Lsdpfxszlytxe Akljag Zuani IV79 and IV91 for wood and wood-aluminum, for EUR 7,700. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Screen control for 99 window types Laodpfxjy Dud Ee Aklsg Support bar for muntin production, pneumatically indexed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Corner jointing unit with support rail Return conveyor to operator side Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ tool set, IV-78 THE SYSTEM IS IN VERY GOOD TECHNICAL AND COSMETIC CONDITION Delivery: EXW Delivery time: Prompt by arrangement Inspection: By appointment Payment: Upon notification that the goods are ready for dispatch Subject to prior sale and errors excepted.

Condition: reconditioned (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis Laedpfx Ajvu Hfqjklsg > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently have used...

Condition: ready for operation (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW Lasdpfoxtvgksx Akleg > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, Second-hand Weinig Unicontrol 6 control cabinet, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Laodpoztvt Rjfx Aklsg Hilger & Kern brake unit Rathgeber ET 1000 transformer

Condition: used, Year of construction: 2002, total width: 7,660 mm, total height: 2,090 mm, Colour: Grey Dimensions (LxBxH): 160 x 766 x 209 cm Four-side moulder Weinig Profimat 26 S, 6head Year of construction 2002 Machine number 95514 min/max Working height 8/120 mm min/max Working width 20/230 mm Working speed 5/24 m/min Lodpfx Akewng I Djlsag Spindle speed 6000 rpm Spindle diameter 40mm Engines 1. Spindle - under ..kW 2nd/3rd Spindle - left/right .kW 4. Spindle - above 11kW 5. Spindle - above 11kW 5. Spindle - under ..kW Dimensions 3900 x 1800 x 1900 mm (L x W x H), weight 2500 kg - Year: 2002 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - Min. planing width [mm]: 6 - Max. planing width [mm]: 250 - Max. planing height [mm]: 130 - Feed table length [mm]: 1970 - Feed roller diameter [mm]: 140 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 24 - Transport dimensions: 1600mm x 7668mm x 2090mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Weinig Unicontrol 10 (UC 10) mitre saw system for the manufacture of windows, components and doors. Suitable for frame-by-frame, batch or individual part production, with 2 tenoning and slotting spindles, including an Oertli tool set Units: 1. Cross-cut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, Lasdpfx Akoztv Diolog Technical data: - Clamping length: 640 mm (8 x 80) mm

Condition: used, A wide range of second-hand spare parts or complete units, control systems and control cabinets for Weinig Unicontrol (and other makes) are always in stock. Please contact us. Sample images. Laodpozu I I Nefx Aklsg

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, spindle diameter: 50 mm, type of input current: three-phase, input voltage: 400 V, number of spindles: 9, input frequency: 50 Hz, input current: 184 A, WEINIG Hydromat 23 - 9 heads, refurbished in 2020 Ljdpeztpgwsfx Aklsag Opre Annamária: Oh +36 20 949 4988: For sale: a WEINIG Hydromat 23, one of the most reliable machines for professional woodworking. The machine underwent a complete overhaul in 2020 at a German specialist service center and has been operating flawlessly ever since. Technical specifications: - 8 + 1 universal heads, total 74.5 kW (lower 11 kW, upper 11 kW, the remaining heads 7.5 kW, including one universal head) - Working width: 230 mm - Working height: 160 mm - Tool/spindle diameter: 50 mm - Year of manufacture: 2000, complete overhaul in 2020 at a German specialist service center The machine can be viewed and tested in operation by prior arrangement in Nagytarcsa, near Budapest, Hungary. Available as a separate option: with many planing heads, planing knives, accessories, and a dust extraction system. Price: 59,000 EUR

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 170mm 6 spindles: 1) horizontal lower 230mm 5.5kW 2) vertical right 170mm 3) vertical left 170mm (spindles 2 and 3) 11kW 4) horizontal upper 230mm 11kW 5) horizontal upper 230mm 7.5kW 6) horizontal lower 230mm 11kW - all spindles adjustable up/down, right/left - spindles 4 and 5 with electric up/down adjustment - spindle speed 8000 rpm - spindle diameter 40mm - all spindles equipped with an electric brake - 6 top feed rollers, pulling, toothed, including 1 double roller - top discharge roller, pulling, rubber, double - bottom discharge roller, pulling, rubber, double - side pressure - feed on Cardan shafts - rollers with pneumatic pressure - stepless feed speed adjustment 6-24m/min - feed motor 4kW - electric adjustment of planing thickness - body lifting motor 0.55kW - central lubrication of the table - diameter of extraction nozzles 6x140mm - dimensions (L/W/H) 4900x2400x2000mm - weight approximately 4000kg Ledpfjzwwc Iex Akljag ADVANTAGES – German production, WEINIG brand – with 6 heads – unpainted – used planer, very good condition Original photos Net price: 122900 PLN Net price: 2926 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: used, Tenoning spindle 1 St. Laodpfxey T R Tue Akleg Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Lasdjzi D Iuepfx Akljg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 600 mm, height adjustment type: electric, rotational speed (max.): 2,900 rpm, Equipment: saw blade guard, Cutting length: 6200 mm Cutting width: 1100 mm with electrically adjustable fence Cutting height: 195 mm Motor power: 11 kW Saw blade speed: 2900 rpm Infinitely variable feed speed adjustment: 1–80 m/min Laedpfx Akoz D Ahgolog Two laser guides 6-position cutting height adjustment Two pneumatic clamps Year of manufacture: 2010

Condition: used, Year of construction: 1962, Used Machine Year of manufacture: 1962 Features and technical specifications: Planing width: 630 mm Working height: 250 mm Table length: 1100 mm Vacuum port: 160 mm Blades: 4 strip planer blades Ljdpfxozk Nnie Aklsag The machine does not have a motor brake! Location: 63934 Röllbach Availability: available immediately

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. It is in used condition but fully functional. Year of manufacture: 1988, Machine No. 032-230 Including control cabinet! Comes with three complete sets of Leitz tools: - IV68 reversible cutting tool with standard profile - IV68 cornice profile for historic buildings - Tools for wood and aluminum windows The following tools are available (as shown in the pictures): 1x straight cutter, vertical and 1x horizontal 1x straight frame cutter, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile cutter, horizontal 1x tenon cutter, vertical 7 straight cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any warranty. Price upon request. Lodpfx Akezx Emdoleag Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Lajdpezuyxgefx Aklsg Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: excellent (used), Year of construction: 2018, Notch-tongue system Weinig GRECON Lodpfx Akszx Tddoleag Type ProfiJoint 10/6100 LI

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: Laedpfx Asyvgiaekleg - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: excellent (used), Year of construction: 2013, I sell the fourside moulder Weinig POWERMAT 600, year 2013 Working width 230mm Working height 130mm 6 spindles configuration: Bottom Lsdpfx Ajyznrkokleag Right Left Top Top - 8000rpm Bottom 3-zone pneumatical pressure Good condition Fully working! Available immediately Including full documentation and CE certyficate.

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed. Lsdpfx Ajwgbw Reklsag

Condition: used, Year of construction: 2004, Planer and moulder Weinig Powermat 2000 PowerLock - Technical data Working width 30 - 300 mm Working height 19 - 200 mm First lower tool holder Motor with brake 18.5 KW Speed 8000 rpm Tool flight circle 125 - 180 2nd tool holder First right tool holder Motor with brake 15 KW Tool flight circle 93 - 200 3rd tool holder First left-hand tool holder Motor with brake 15 KW Tool flight circle 93 - 200 mm 4th tool holder First upper tool holder Motor with brake 37 KW Ledpeunbrbjfx Aklsag Tool flight circle 93 - 200 5th tool holder Second lower tool holder Motor with brake 22 KW PowerLock tool holder Speed 8000 rpm Tool flight circle 93 - 225 Feed system Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg Laedpfx Akszkim Selog High productivity and reliable WEINIG quality

Condition: excellent (used), functionality: fully functional, Weinig Profimat 26S four-sided planer Ledpjz Aha Uofx Aklsag Working width 230mm Working height 130mm Number of spindles 6 Spindle arrangement: Bottom 4kW Right Left 7.5kW Right 5.5kW Top 5.5kW Bottom 5.5kW Electronic adjustment of workpiece height and width Feed speed adjustable via a variator, 5-24 m/min CE certificate Technical documentation

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Ledpfxjytd S Ne Aklsag Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Laodjzt Hf Dopfx Akljg Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW