Used Vertical Turning Center for sale (24,286)

Condition: used, Year of construction: 2019, operating hours: 22,000 h, functionality: fully functional, turning length: 650 mm, spindle motor power: 15,000 W, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 750 mm, rotational speed (max.): 4,500 rpm, bar passage: 76 mm, total height: 2,340 mm, total length: 2,334 mm, total width: 3,550 mm, overall weight: 11,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Multi-axis turning and milling center including a short bar loader from Samsys - SMW Autoblock chuck BBM 210 - SMW Autoblock chuck BBM 210 - Chip conveyor - Tool measuring arm Renishaw - Bar loader interface - Part gripper from the sub-spindle including conveyor belt - Oil separator - Air conditioning unit for the control cabinet Nodpfx Ajz Uxh Eekislh - SAMSYS bar loader MULTI 3000 with numerous accessories - Chuck purging system - Automatic door - 6 driven tools on the X-axis - 6 driven tools on the Z-axis - Numerous basic setups - Collet chuck for the main spindle with collets - Fanuc 0iTF with a 15" monitor - 10 bar coolant - 2 x 16-position turret

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Njdpfxozzxk Uj Akislh Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 242536, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, MACHINE INFORMATION Manufacturer: Mazak Model: VCS 530C Year: 2012 Condition: (Used) Great Serial Number: 242536 Control: Mazatrol Smart Accessories: 4th Axis, Renishaw Spindle Probe, and Tool probe. MACHINE SPECIFICATIONS Nlsdpez D Euvofx Akieh Control: Mazatrol Smart X Axis Travel: 1050mm Y Axis Travel: 530mm Z Axis Travel: 510mm Max Workpiece Weight: 1200KG Spindle Speed: 12,000rpm Table Size: 1300 x 550mm Tool Change Capacity: 30 ATC Tool Size: BT40

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 1020 x 610 x 610mm, Table size 1200 x 600mm, Table load 700Kgs, Table to spindle 100-710mm Spindle taper BT40, Spindle speed 12,000rpm, spindle motor 18.5KW, 30 station ATC, Heidenhain TNC530, through spindle coolant, swarf conveyor 4th and 5th axis unit. Nodpoz Ehxgsfx Akielh

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. Nodoz R T Exepfx Akielh The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, CNC Vertical Machining Center HERMLE C 22 U With Siemens 840 D sl Operate path control Year of manufacture: 2014 Travel ranges: X 450 Y 600 Z 330 Speed range: 20 – 18,000 rpm, infinitely variable (HSK 63) With the following accessories: NC rotary table, 320 mm clamping surface Vertical tool changer with 55 magazine slots (HSK 63) Linear axes, dynamic version Internal coolant supply (IKZ 80 bar) Chip conveyor, left-hand side Coolant system Machine bed flushing Nlsdpj Ad Uppsfx Akioh Automatic cabinet door, automatic cabinet roof Polycarbonate safety screens Rotating clear window (Rotoclear) Compressed air for limit switches Electrical thermal compensation, Siemens 3D measuring probe, Heidenhain BLUM tool breakage detection/measurement system Oil mist extraction 4 adjustable machine feet Operating manuals

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 480 mm, turning diameter over cross slide: 300 mm, turning diameter: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 7,000 rpm, spindle bore: 45 mm, travel distance X-axis: 160 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 510 mm, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 45 m/min, rotational speed (max.): 6,000 rpm, feed rate Y-axis: 15 m/min, total height: 1,985 mm, total length: 2,680 mm, total width: 1,950 mm, bar diameter (max.): 45 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, FANUC 31iT Plus CNC control iManual Guide 15" TFT Touch Screen 2 SAUTER turrets with 12 positions for radial VDI 25 driven tools Y-axis travel: +40/-30 mm Main and counter-spindle power: 15 Kw Main and counter-spindle nose: ASA 5" Bar capacity: 45 mm CE marking MACHINE COMPLETE WITH: - Chip conveyor - 2 high-pressure coolant pumps (14 bar) - Installation materials - Part washing gun - 3D machine model in .stp format Nodpfx Akszcfb Dsiolh - INDUSTRY 4.0 READY package - Part catcher for bar machining - Bar feeder interface - Machine status lamp - Tool load monitoring - MARPOSS tool pre-setter - 2 foot pedals for opening/closing the main and counter-spindle - 2 pumps for high-pressure coolant (24 bar) - Electrical cabinet air conditioner

Condition: good (used), Year of construction: 2015, Micromill V 22, year of manufacture 2015, Heidenhain TNC 620 control, travel X/Y/Z 1000/570/560 mm, table size 1100 x 520 mm, max. table load 800 kg, spindle speed 15,000 rpm, 30-position tool magazine, SK 40, internal spindle cooling, oil skimmer, cooling unit, electrical cabinet air conditioning, chip conveyor, total spindle hours 5,500. Nljdpjx Hynnefx Akieh

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. The machine comes from a factory closure and is characterized by its long service life and sturdy construction. It is ideally suited for the precise production of individual parts as well as for series production. The machine is fully functional and can be inspected while powered on. Equipment: - Three-jaw chuck - 11-station tool turret (partially with powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system Njdpfx As Afpmxokielh - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools

Condition: excellent (used), Year of construction: 2013, Vertical machining center, Haas VM-3, year 2013. Nodpfxo Adptco Akielh

Condition: used, Year of construction: 2016, x-travel 1020 mm y-travel 700 mm Nsdps Aaq T Aofx Akijlh z-travel 500 mm control Heidenhain iTNC530

Condition: excellent (used), Year of construction: 2021, Table size 3500 x 820 mm, table load 2500 kgs, Nlodez Ha H Sepfx Akish traverses XYZ 3000 x 800 x 720mm, Rapid federate 50m/min, Spindle power 35Kw, spindle speed 18,000rpm, 30 station ATC, Spindle taper CT40, Mazak Smooth Control, B axis +/- 110 degrees, C axis 0.001 degrees, Through spindle coolant, swarf conveyor.

Condition: used, Year of construction: 2006, Victor V26-II CNC lathe; with C-axis; with driven tools; FANUC 21i-TB control; chuck: 10"; turning diameter: 520 mm; turning length: 1090 mm; spindle speed: 3,500 rpm; upper turret toolholder with 12 positions, 6 of which are driven; tool presetting device; chip conveyor; oil mist extraction. Nlsdpfx Aksr E Amgeijh

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter Nlodpfez S Nygox Akioh DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: good (used), Control system: Siemens 840 D Turning diameter: 290 mm Turning length: 850 mm Distance between centers: 600 mm Spindle bore: 103 mm Nedpfxs Afacde Akiolh Spindle speed: 3,000 rpm Driven tool speed: 3,000 rpm Chip conveyor Weight: 11,000 kg

Condition: like new (used), Year of construction: 2023, Robodrill D21MIB5P/10K/2-W FANUC ROBODRILL D21MIB Plus Version with 2 option slots 24,000 rpm high-speed spindle X-axis travel: 500 mm Extended column +100 mm FANUC CNC control Series 31i-B High-speed CPU CE-compliant version Control panel with touchscreen including touch pen Enabling switch Nlodpfxe Adu Ile Akioh Machine interior with LED lighting Automatic oil lubrication Standard air blow function Telescopic cover for X-axis Z-axis protective cover Spindle head cover Machine enclosure for X500 version 32 A CEE connector Transformer for European version Air distribution system English machine and safety labeling Documentation / operating and spare parts manuals, English CE basic package CE basic package PE connection kit 32-A CEE plug FANUC DDRIB rotary table Integration of a FANUC DDRIB rotary table Additional controlled axis Additional axis amplifier 80 A DDRIB connection / plug connection FANUC DDRIB rotary table, 1 unit Cable holder for X500/X700 Integration of the DDRIB including rotary feedthrough FANUC coolant system BASIC, left-hand side, without chip conveyor External cooling (AK) with 5.5 bar Flushing of the work area / chip flushing with 200 l/min Left-hand version Without chip conveyor 3-year-old machine that is completely new but has not been accepted by the end customer from Fanuc in the last 3 years.

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Nodpfxoz Ha Ayo Akielh Coolant, Low volt light, Swarf Conveyor

Condition: good (used), Year of construction: 2023, Spinner TC 600, Year of manufacture 2023, Fanuc 32 i TB control system, Nljdpfx Aksy Thmleioh Travel range X/Z 275/700 mm, Chip conveyor, Tailstock, 16-position turret, VDI 40, C-axis, Powered tool holders, 3-jaw chuck Ø 250 mm.

Condition: used, Year of construction: 2014, x-travel 1600 mm y-travel 820 mm Nljdpe Aaq Tijfx Akioh z-travel 700 mm control Heidenhain iTNC530 weight of the machine ca. 7500 kg

Condition: excellent (used), Year of construction: 2014, Takisawa NEX - 908 – 6-axis machine Year of manufacture: 2014 Njdpfx Ae Adrf Uekijlh Control system: - Fanuc Series 32i - Model B Tool turret: - 12 stations, all stations driven (powered tools) Main spindle: - Spindle bore 52 mm. Axes: - X, - Z, - C, - Y, - A, - B Accessories: - Various driven tools, axial/radial - Various collets - 1 collet chuck - Parts collection system - Chip conveyor - Coolant system Availability: - Immediate Special features: - The machine will be sold complete with all accessories (full equipment package). - The machine can be inspected and tested under power.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Nledpfxjz S H H Dj Akieh Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system

Condition: used, Year of construction: 2014, x-travel 1060 mm y-travel 520 mm Nlsdj Aaq T Nepfx Akioh z-travel 610 mm control Siemens weight of the machine ca. 5900 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 40,967 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 2,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 5,600 mm, table width: 1,100 mm, table length: 1,100 mm, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 28 W, Year of construction: 2007 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0º/190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Max. workpiece weight kg: 2000 Table rotation speed rpm: 500 max. torque Nm: 5600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 28/19(40/100%DC) Spindle torque Nm: 727/492(40/100%DC) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Chip-to-chip time s: 5 Equipment Electronic Handwheel Nodpfxe Afdibo Akislh Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Mist collector 3D quickSET Machine running times Under power: 91090 Spindle Working: 40967 Basic machine dimensions / weight Length mm: 7500 Width mm: 5600 Height mm: 3500 Weight kg: 24000

Condition: good (used), Year of construction: 2003, travel distance X-axis: 4,200 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,250 mm, LinX Compact 1077 Control system: Fidia C20 Operating hours: 35,340 h Nlodpfx Ae Afafrjkioh Spindle 1: 21,926 h Spindle 2: 10,311 h HSK 63; HSK 100 3D probe; tool measurement using laser

Condition: excellent (used), HAAS Mini Mill 2 Vertical Machining Centre Year 2010 Serial number 1081104 X axis travel 508 mm Y axis travel 406 mm Z axis travel 356 mm Nlodsz N Alwepfx Akieh Table size 1,016 × 356 mm Maximum table load 227 kg Spindle nose to table 102–457 mm Maximum spindle speed 6,000 rpm Maximum spindle power 5.6 kW / 7.5 hp Spindle taper 40 taper — CT40 or BT40 to confirm Automatic tool changer 10 station