Used Vertical Dryer for sale (8,909)

Condition: used, Year of construction: 2000, “Adsorption air dryer” max. operating pressure: 16 bar max. temperature: 55°C capacity: approx. 420 m³/h weight: 250 kg 2 carbon steel tanks, magnetic and check valves, pressure reducing pipe, metal frame, tank pressure gauge and electrical control panel. Fsdpfezr H Uvex Aa Eepk

Condition: used, UV drying system Totalisator operating hours 1484 Fsdpszr I U Dsfx Aa Ejpk The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm z-travel 450 mm Control Ultimax In our assessment, the machine is in good used condition and can be inspected under power by appointment. Fsdpfozrh Rlex Aa Espk The machine is operational. The X-axis ball screw is making noise and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm Fpsdpfx Aswgi Drsa Ejk control Heidenhain Mill Plus V600 weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 500 mm z-travel 500 mm control Siemens Fpedpfx Aaswtr Elj Esk

Condition: new, Year of construction: 2020, functionality: fully functional, sweeping width: 280 mm, empty load weight: 20 kg, fuel type: electric, drive type: Elektro, construction width: 376 mm, Scrubber dryer Condition: New Fodpfxsvzzdhe Aa Eepk Technical condition: New

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, fuel type: electric, construction height: 1,120 mm, drive type: Elektro, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Description: - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. Fpedpfx Aajy Uph Hs Eok - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar Fpsdpfx Aozpzblsa Eok - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: good (used), Year of construction: 2007, functionality: fully functional, Spinner MCV 610, Year of manufacture: 2007, Control system: Siemens Sinumerik 840 D, Travel range X/Y/Z: 610/500/500 mm, Spindle speed: up to 10,000 rpm, Spindle taper: SK 40, Fpodpfx Aozt Iuyea Ejk Tool changer: 24 positions, Table size: 1000 x 600 mm.

Year of construction: 2009, condition: good (used), For Sale: Fodpfxjznhwqj Aa Eepk Make: Kittner Type: Crate washing machine + dryer Automatic feed Included: - Crate washer + dryer - Electrical diagrams The crate washer is adjustable in height and width. Maximum crate dimensions: width x height 420 mm x 270 mm Overall machine dimensions: length x width x height 4000 mm x 1200 mm x 1640 mm It is possible to view this crate washer on site. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: WEMAS GmbH Fsdpfx Aszi Hdlja Eepk Type: BZ 500 Year of manufacture: 2015 Control system: FANUC Series 0i-MD Connected load: 22 kVA Operating voltage: 400 V Weight: approx. 8,280 kg Equipment: Pallet changer The machine was primarily used for aluminum processing and is very well suited for this purpose. According to our current knowledge, the machine is generally in operating condition. There is currently a malfunction in the pallet changer, which is likely due to a defective sensor. Therefore, the pallet changer is currently not reliably usable. According to our current knowledge, all other machine functions are operational. The machine is currently powered on and can be inspected after prior appointment.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Vertical turning lathe with a 2,200 mm table diameter and an approx. 2,500 mm swing diameter. The base machine is from the Chinese manufacturer QQHR (well-known manufacturer). The entire electrical system, including the main motor, servo drives, control cabinet, and PLC, was completely renewed and professionally overhauled by Paulmann (Germany) in 2017. Fpsdpfx Aajycgxko Eek

Condition: used, Year of construction: 2011, Technical details: x-travel: 660 mm y-travel: 355 mm z-travel: 500 mm total power requirement: 19 kW weight of the machine ca.: 4,1 t Fpodpszq S D Tjfx Aa Esk

Condition: good (used), Year of construction: 2012, Vertical CNC turning machine with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control system with Manual Guide i; 630 chuck – 900 mm turning diameter; Automatic door; 2-stage gearbox – resulting in very high torque; Fjdpfx Aasztqp Hj Ejpk Tool setter, detachable; Chip conveyor; Various tool holders, fixed and powered; Only approximately 4,100 operating hours. An inspection is possible and recommended by arrangement, with the machine powered on.

Condition: used, Year of construction: 2016, Technical details: turning diameter: 150 mm Fjdpfozq Aw Rox Aa Eopk

Condition: used, Year of construction: 2016, Technical details: Fsdpfjzq Aw Dox Aa Eepk turning diameter: 150 mm

Condition: excellent (used), Year of construction: 2004, operating hours: 8,909 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 2,800 mm, total width: 2,700 mm, table width: 500 mm, table length: 800 mm, overall weight: 4,500 kg, spindle speed (min.): 10,000 rpm, Year of manufacture: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 630 Y-axis travel mm: 500 Z-axis travel mm: 500 Worktable Table dimensions mm: 800x500 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 9/13 (40/100% ED) Cooling Cooling through the spindle center: 15 Tank capacity: 750 Tool system Tool holder: SK 40 Tool magazine slots: 24 Equipment Electronic handwheel Chip conveyor Internal coolant supply Operating mode 4 Air blowing through the spindle center, selectable via M-function Measuring probe Machine running times Under power: 34476 Spindle working: 8909 Rated power kVA: 32 Basic machine dimensions / weight Fodpfx Aezn Awrea Eopk Length mm: 2800 Width mm: 2700 Height mm: 2700 Weight kg: 4500

Condition: good (used), Year of construction: 2016, Vertical machining center Machine type: DMG Mori Ecomill 1100 V Control: Siemens 840 Dsl -Operate Year: 2016 SPECIFICATIONS Travel X-Axis: 1.100 mm Y-Axis: 560 mm Z-Axis: 510 mm Rapid motion: (X/Y/Z): 36 / 36 / 30 m/min. Spindle speeds: 12.000 rpm Spindle motor: 13 kW Torque: 82 Nm Tool: SK 40 Toolchanger Fedpfx Aajzrm H Sj Eepk Tool capacity: 24 Table size: 1.400 x 560 mm Max. Table Load: 1.000 kg Equipment Chip conveyor Cooling pumps Internal cooling: 17 Prod. Pack 1 bar

Condition: good (used), Year of construction: 2018, 3x Digicolor dryers, as shown in the pictures. Fjdpfxsztqdwe Aa Ejpk

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Fsdpfx Ajztpmdsa Eepk Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Fpodpfxjzhn Txe Aa Eok Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1990, FOR SALE BERTHIER BMF 160 VERTICAL TURNING LATHE Dimensions and capacities: - Table diameter: approx. 1750 - Maximum turning diameter: approx. 1800 – 1880 mm - Maximum machining height: approx. 1600 mm and 600 mm stroke - Maximum workpiece weight: up to approx. 15,000 kg (15 tons) Performance and drive: Fpodpfx Aajzlrifs Ejk - Table rotation speed: up to approx. 250 rpm - Spindle motor power: from 37 kW to 55 kW depending on the version - NUM 1060 type CNC controls

Condition: good (used), Year of construction: 1980, Please find below the technical specifications for the RAFAMET vertical lathe, Type KCF 250: General information: Fpedpfx Aozlrg Dja Ejk - Year: 1975 - Overhaul/Retrofit: Approximately 2010 - Table diameter: 2500 mm CNC NUM 1060 Technical capabilities (indicative data for this machine segment): - Table diameter: 2500 - Maximum external machining diameter: 2700 - Maximum turning diameter: ~2800 mm - Maximum workpiece height: ~2200 mm - Table load capacity: Up to ~15,000 kg (15 tons)

Condition: good (used), Year of construction: 2008, The Striebig Control 6216 (year of manufacture 2008) is a premium-class vertical panel dividing saw with a cutting area of approximately 5300 x 1600 mm, designed for the precise cutting of wood, plastics, and aluminum composite panels. Technical features: Cutting area: approximately 5300 mm in length 1600 mm in height (model 6216) Control: fully electronic positioning and touchscreen operation for serial cuts. Fodezpbcvepfx Aa Eepk Cutting depth: up to 80 mm. Application: optimized for fully automatic workflows and high repeatability. Location: will arrive in week 33 at warehouse 54634 Bitburg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in the opposite direction to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Effective passage height: 80 mm Installed electrical power: 115 kW Solvent-containing air discharged to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch panel VS-spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Outlet electrical power: 1.5 kW; Supply air to the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-frost protection for No. 1 heating register, with sensor and automatic control of the shut-off valve 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air knife outlet velocity max. 32.5 m/sec Fedpsztp Tksfx Aa Espk Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Effective passage height: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch panel TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized, PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Subject to change, errors and prior sale in technical data)