Used Vertical Dryer for sale (9,251)

Condition: used, Year of construction: 1979, machine/vehicle number: 49694, overall weight: 475 kg, temperature: 200 °C, TECHNICAL DETAILS Material: Stainless steel 1.4541 (321) and 1.4571 (316Ti) Gkodpfo Ai Eqhex Acmed Container Capacity: 12 l Container dimensions: ø 250 x 250 mm Inlet: ø 100 mm Outlet: ø 50 mm Temperature: max. 200 °C MACHINE DETAILS Pressure Operating pressure, container: 4 bar Operating pressure, double jacket: 5 bar Motor power: 2.2 kW Voltage: 380 V Motor speed: 1,470 rpm Shaft speed: 80–500 rpm Dimensions and weight Footprint: 1.8 x 0.8 m Overall height: 1.4 m Weight: 475 kg EQUIPMENT Movable frame on wheels Vacuum operation possible Double jacket Continuously variable drive Switch

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Gkjdpfxj Aa Aqtj Acmod Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Gkedpfx Aco Ai Scvsmod Submitting a bid obligates you to collect the item promptly between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel range X-axis: 960 mm Travel range Y-axis: 380 mm Travel range Z-axis: 380 mm Distance from table center to column: 190–570 mm Rapid traverse rate: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle mount: ISO 40 Spindle speed: 100–6,000 rpm Ball screw X and Y axis diameter: 32 mm Ball screw X and Y axis pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied secondary positions: 85 mm Max. tool diameter with free secondary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External reference: Schönichen - Lot 23

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Travel in X-axis: 960 mm Travel in Y-axis: 380 mm Travel in Z-axis: 380 mm Distance from table center to stand: 190–570 mm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table dimensions: 700 × 360 mm T-slots: 3 × 18 mm T-slot spacing: 110 mm Distance from table to floor: 840 mm Max. table load capacity: 300 kg Spindle connection: ISO 40 Spindle speed: 100–6,000 rpm Ball screw, X and Y axes, diameter: 32 mm Ball screw, X and Y axes, pitch: 10 mm Tool positions: 16 Max. tool diameter with occupied auxiliary positions: 85 mm Max. tool diameter with free auxiliary positions: 135 mm (?) Max. tool length: 250 mm Max. tool weight: 6 kg Max. total weight of tools: 60 kg Gkjdpfx Acj Ai Shlomsd MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D measuring probe Note: The vice shown in the photos is not included. External Reference: Schönichen - Lot 25

Condition: used, overall weight: 1,590 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Heating chamber Heating chamber volume: approx. 1,000 liters Heating chamber diameter: 1,100 mm Heating chamber depth: 1,050 mm Number of doors: 1 Heating plates Number of heating plates: 6 Heating surface: 4.3 m² Plate dimensions: 720 x 1,000 mm Plate spacing: 100 mm Container dimensions: 700 x 1,000 mm MACHINE DETAILS Connections Vacuum pump connection diameter: 50 mm Connections with a diameter of 40 mm: 2x Dimensions and weight Space requirement: 1.9 x 1.4 m Overall height: 1.9 m Weight: 1,590 kg EQUIPMENT Drying container Vacuum pump connection Coated housing and coated heating plates Godps Akbxdofx Acmjkd

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, No minimum price – guaranteed sale to the highest bidder! The auction includes: CEFLA FEV E dryer: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU CEFLA TR 3000 roller conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW Note: The paint booth shown in the video is not included in the scope of sale and delivery. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Passage usable height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Gkedpj Ah Rfrjfx Acmsd Maximum speed at the air meter outlet: 32.5 m/sec Supply and recirculation fan power: 3 kW Exhaust fan power: 1.5 kW Supply and recirculation fan flow rate: 6,000 m³/h Exhaust fan flow rate: 6,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats CEFLA TR 3000 roller conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: used, overall weight: 1,400 kg, screw diameter: 400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Conveyor screw Design: vertical tube screw Screw diameter: 400 mm Screw length: 3.4 m Screw speed: 28 rpm Conveying height: 5.0 m MACHINE DETAILS Gsdpfj Akbz Ijx Acmokd Motor power, screw: 4 kW Motor power, Floveyor: 3 kW Voltage: 380 V Dimensions and weight Space requirement: approx. 3.5 x 1.5 x 1.0 m Overall height: approx. 6.0 m Weight: 1,400 kg EQUIPMENT Floveyor (aeromechanical conveyor) Switch

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,220 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Table dimensions: 1,000 × 560 mm Spindle speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS CNC control: Heidenhain TNC 530i Godpfx Ace Ah H Ipsmokd Operating hours Spindle hours: 35,220 h Machine operating hours: 141,964 h Control operating hours: 162,422 h EQUIPMENT Chip conveyor

Condition: used, Year of construction: 1998, machine/vehicle number: H 00116, overall weight: 550 kg, tank capacity: 5 l, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Gksdpfxs Akb I Rs Acmsd TECHNICAL DETAILS Fluidized bed Design: Fluidized bed dryer/coater Container volume: 5 l Container diameter: 300 mm Batch size: 1.5–5.0 kg Spray system: Bottom spray process Filter Number of dust filters: 5 Filter dimensions: Diameter 65 x 430 mm Cleaning: Compressed air pulse MACHINE DETAILS Dimensions and weight Footprint: 1.2 x 1.2 m Overall height: 2.0 m Weight: 550 kg EQUIPMENT Product container Additional product container Bottom spray device Spray nozzles Spare parts Dust filter with compressed air cleaning Control cabinet Mobile Note: Without blower and without ventilation unit.

Condition: used, Year of construction: 1990, machine/vehicle number: 8603, overall weight: 700 kg, tank capacity: 8 l, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dryer Type: Paddle dryer Capacity: 8 liters Trough diameter: 170 mm Trough length: 375 mm Total heating surface: 0.28 m² Temperature: max. 350 °C Heating Double jacket capacity: 2 liters Heated shaft capacity: 1 liter MACHINE DETAILS Operating pressure, dryer: 10 bar Vacuum dryer: yes Operating pressure, double jacket: 16 bar Drive Type: continuously adjustable via frequency converter Motor power: 7.5 kW Voltage: 500 V (Ex) Dimensions and weight Space requirement: 1.8 x 0.9 m Overall height: 1.8 m Weight: 700 kg EQUIPMENT Double jacket Heated shaft Godpfx Aco Akbk Remjkd Frequency converter Mounted on frame Vacuum-resistant ATEX design

Year of construction: 1999, condition: used, machine/vehicle number: 26191, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Tank Design: closed, vertical tank, portable Capacity: 1,070 l Tank diameter: 1,100 mm Cylindrical height: 1,350 mm Bottom: flat Lid: hinged lid Lid opening diameter: 400 mm Outlet: DN 50 Gksdps Akckhjfx Acmjd MACHINE DETAILS Dimensions and Weight Footprint: 1.2 x 1.2 m Overall height: 1.75 m Weight: 270 kg EQUIPMENT Double jacket Lid Portable

Condition: used, overall weight: 200 kg, tank capacity: 800 l, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 800 l Tank dimensions: Ø 930 x 1,200 mm Design: Conical bottom Top connections: 2x Ø 25 mm + Ø 80 mm + Ø 200 mm Outlet: approx. Ø 25 mm Material: Stainless steel MACHINE DETAILS Dimensions and weight Footprint: 1.1 x 1.1 m Overall height: 2.0 m Weight: 200 kg FEATURES Closed vertical design Godpfj Ai Ndkex Acmskd Lid

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: VN22049, total width: 1,300 mm, total length: 1,500 mm, total height: 1,700 mm, punching force: 40 t, empty load weight: 2,400 kg, overall weight: 2,500 kg, input voltage: 400 V, A very specialized letterpress model with a vertical base. Can be used for letterpress printing, exhibitions, or for embossing, die-cutting, scoring, and perforating. Comes with numerous operating instructions and lubrication diagrams, as well as spare parts. Gksdo Aipf Aopfx Acmed

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Gedpsyh Hc Refx Acmskd

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Gkjdpfxjzf Ivuj Acmed Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging & Dosing Machine, 2020 Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number specifies a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Gedpfx Ace Agq Sdjmekd Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form fill seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) Gedpfeyug Hxsx Acmokd "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Gsdpfxsz Rqcyo Acmokd Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Gkjdpfxsy Iplfe Acmsd Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Gkjdpfxoyzaamo Acmed Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm Gksdpfx Acowm Nfvjmjd • Drive Power: 55–132 kW • Dimensions: o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: Gedpeyug R Rofx Acmokd • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,300 mm, controller manufacturer: Fanuc, controller model: 31i Model B, total height: 4,020 mm, total length: 13,391 mm, total width: 6,019 mm, table width: 1,150 mm, table length: 7,300 mm, rotary table diameter: 1,050 mm, Equipment: chip conveyor, documentation/manual, Milling and turning in a single setup. Tilting milling head, rotary table for vertical turning, and horizontal turning head with tailstock. Gjdpfx As Aidrvecmjkd Original specifications available upon request.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands Godpfoz Di Nwsx Acmekd The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Gksdpsziu Hzjfx Acmod Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome