Used Vertical Carousel for sale (7,568)

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available Ljdpodnhz Ujfx Aalsri External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 2 identical machines available Lrsdpfx Aaodnh R Hjloi External dimensions: Height 4340 mm Width 3270 mm Depth 1680 mm 26 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 120 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: gray / gray, Surface cleaned, signs of wear and minor deformations possible Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes, or deviations in detail in the illustrations. Photos of a similar machine. Assembly currently mainly in Germany, Austria, and some neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each Lrjdpfx Aaod Spf Rjlei In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: H = 380 mm W = 2500 mm Lrjdpfxednzg Ns Aalji D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA Lrodpfxoyug R Rj Aalsi • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: Lrjdpfx Aoyug Hxoalei "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, total length: 1,300 mm, total width: 1,300 mm, total height: 2,900 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid requires collection within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Auction of a mobile small parts carousel including stock of various clamping devices, threaded rods, nuts, and clamping plates! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 1,300 x 2,900 mm Weight: 300 kg Ljdpfjyn Elmsx Aalori External reference: Lot 10 / Wittner

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Lodpfxjyplqre Aalori Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Ljdpfxeyr Nume Aalsri Possibility to work horizontally or vertically The increment is done by the front handle

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions Lodpfx Aaoxpqm Rjlori 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 19,000 kg, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates Ljdeyubhqspfx Aalsri – Hydraulic opening cap – Automatic lubrication system

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Lodefd Rxqopfx Aalsri Description: VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. Lodpfxehr Rp Ss Aaljri We offer transport with our own semi-trailer.

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Lodswnx H Ejpfx Aalori Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Lredpfx Aoq U A Hujalji

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm Lredpfx Aajwnp Akolei - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Ledpfsxc I Dgox Aalori As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: good (used), machine/vehicle number: KV, Vertical injection molding machine with 5–2500 ton clamping force Lredpfxeypaqgs Aalsi

Condition: ready for operation (used), Year of construction: 1992, operating hours: 10,643 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, rotational speed (max.): 3,600 rpm, controller model: Heidenhain iTNC 530, A retrofit of the machine was carried out in 2010! TECHNICAL DETAILS Travel range X-axis: 1,500 mm Travel range Y-axis: 815 mm Travel range Z-axis: 815 mm Clamping table: 3,250 x 815 mm Table load capacity: 5,000 kg Quill stroke: 150 mm Spindle: SK 50 Speed range: 40–3,600 rpm MACHINE DETAILS Control: Heidenhain iTNC 530 Milling heads: Usable as single, double, triple, or quadruple head Total power requirement: 44 kW Dimensions & Weight Ljdpfx Aajyrdxtsljri Required space: approx. 8 x 4 x 4.5 m Transport dimensions base unit: approx. 6 x 3 x 3.5 m Control cabinet: approx. 2.6 x 0.6 x 2.6 m Machine weight: approx. 20 t Operating Hours Control operating hours: 20,987 h Machine operating hours: 19,703 h Program run time: 10,643 h EQUIPMENT Hydraulics Various sheet metal parts

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Increased pressure to sell – especially attractive offer! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Lrodpoywgvtsfx Aalsi Max. rapid traverse of linear axes: up to 30 m/min Tool changer: 24 stations MACHINE DETAILS CNC control: Heidenhain TNC 426 PB Connection data: 400 V / 50 Hz Connected load: 32 kVA Main fuse: 3x 63 A Weight: 8,500 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 533 h, functionality: fully functional, machine/vehicle number: 20230605, travel distance X-axis: 1,060 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,060 mm Travel Y-axis: 600 mm Travel Z-axis: 600 mm Spindle speed: 10,000 rpm MACHINE DETAILS Control: Heidenhain TNC 640 Coolant supply: 20 bar Lodpfx Aaeyma Ruolsri Rated power: 30 kVA Full load current: 52 A Max. current load: 250 A Short-circuit resistance: 25 kA Input voltage: 400 V Type of input current: Three-phase Total weight: 7,800 kg Operating hours Spindle hours: 533 h Machine on hours: 2,410 h Control on hours: 2,436 h EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5260 kg Main Drive Spindle Speed 32000 RPM Spindle motor power 8000 kW Movement X-Axis Movement 760 mm Z-Axis Movement 510 mm Y-Axis Movement 500 mm This 3-axis VICTORY VC F76 vertical machining center was manufactured in 2021. It features Fanuc Series Oi-MF Plus control, with axis traverses of X-760, Y-500, Z-510, and rapids at 32m/min. The table size is 840x500, supporting a 500 kg workload, and it includes a 24-tool magazine. Machine weight is 5260 kg. If you are looking to get high-quality milling capabilities, consider the VICTORY VC F76 machine we have for sale. Contact us for more information. Application Types Lrjdpfxjx Hbmlj Aalsi Milling

Condition: good (used), Year of construction: 2010, (ex Formula 1 ) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 30 tools, Lrsdpfx Aasywv N Aslsi swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Lsdev Iq Ezopfx Aaleri Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Lredpfoxy Iz Tox Aaloi Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco