5
Make Zhejiang Shuangzi Industry Machining, Type SUNZDG-04-30, With swithgear , Total height 2.7m, CE , Extra Specifications , Extra information Heat exchange area 30m2 Water evaporation capacity 15-25 Kg/H Beltwidth 1155mm er 110 KW, 380 Volt, 50 Hz Diameter 1700mm, length 9800mm, height 2700mm General Drying device that is intented for liquid and paste like materials. This vacuum drying equipment is capable of continuously feeding and discharging these liquids and pastes by employing a powerful...
4
Description of the process of drying and regulation:
-The drying process of agro material such is hop, hemp, cereals and other commodities of vegetable origin is dependent on input moisture, size and fraction of material, required output moisture and acceptable admissible input temperature. The run of the whole system is control by central electric switchboard which is equipped PLC control unit that works with transferred data from sensors and thermocouples and in connection to these data adjust...
3
We have invested in new hardware and therefore offer for sale:
GTB infrared tunnel dryer / belt dryer / drying channel for textile printing or screen printing.
Year of manufacture: 2007
Bsxjfr3odc
belt width: 120 cm / total width: 145 cm
length: 550 cm
Power: 28 KW
The dryer has 3 infrared heating elements and 1 cooling element at the outlet. The dryer runs reliably well and was in use until the end of November.
Further data gladly on request.
The price is VB gross. The VAT can be shown.
The dry...
8
The ALLinDRYer®, a combination of the classic NEWtainer® WT series, is supplemented by a large hopper. Due to its special construction and air flow, this NEWtainer® can also be used to dry other products without extensive conversion measures. Cereals, grain maize or wood chips.
LARGE FEEDER + FLEXIBLE BAND DRYER = ALLINDRYER®
Bs9sjmmiyv
With the ALLinDRYer® from NEW eco-tec, Germany's leading manufacturer of compact belt dryers sets new standards in drying technology and efficient use of CHP w...
5
Radiant belt dryer with the possibility of chain transport.
Tunnel dimensions:
length 800 cm
width 210 cm
height 108 cm
Gfgettexk
Division into 4 segments of 200 x 210 cm.
Wall and ceiling housing made of 30 mm closed steel profile with a double-sided aluminum sheet wall filled with heat-insulating mat.
All housing walls consist of removable elements measuring 200 x 108 cm. Entrance and exit wall dimensions: 210 x 106 cm, tilting on top hinges with an automatic support, removable.
Heating b...
5
Make Imtech Drygenic (NL), Type Ventilex , No. V135005, Year of construction 2013, Material Stainless steel 1.4404 (316L), With switch , With swithgear , Weight 12000 KG, CE , Extra Specifications Imtech Ventilex drying plant includes a belt dryer with 2 fans and heat exchanger integrated into a 40 foot container. Product inlet distributor with feed belt and swing function. Air supply cabinet with filter unit, fan, heat exchanger for heat recovery, flue gas condenser, heat exchanger for after h...
We offer:
Drum and belt dryers
We produce non-standard products:
Pellet lines from 500kg / h to 10t / h
Raw material feeds
Raw materials for mills and shredders
Conveyor
Coolers
Applicants
Packing machines
Sincerely,
Brsgmfbsi2
Justinas Račka
9
Drive: Wheel
Serial number: N4J91238
Tyres: 70
Axle configuration: 4x4x4
Rhju0ay2
Sort cabin: yes
Number of winches: 2
Link Belt RTC8090 90 Ton 4x4x4 Rough Terrain Crane for sale
Year: 2009
Hours: 5990
Product configuration:
- *Lifting Capacity 81.6 Metric Ton*,
- Caterpillar C6.6, A/C,
- rooster sheave,
- Johnson 677 kg 6 sheave block,
- 90 ton capacity,
- ball,
- 5 sec boom,
- swing away extendable jib,
- anti two-block,
- Link-Belt LMI,
- aux winch,
- hyd outriggers,
- Tires 2...
8
2 pcs conveyor belt type W500
Centre distance 4000mm horizontal, then approx. 1,655mm rising by approx. 65degrees. belt width 490mm with TC-75 inclined cleats, corrugated edge 80mm, cleat spacing 150mm
Fkz9zdsg0
PVC conveyor belt 3R 7-0 F green 490*11300mm endless
carrying side2*wave edges 80mm high free edge zone 100mm
Price for 1 pcs
SPOT UV - EXCEPTIONAL CONDITION
CYLINDER SCREEN PRINTING MACHINE
1990 - SVECIA MARATHON - SIZE B2
Bi3lblocop
MAX PRINT 52 x 72 CM - 20 x 30 INCH
ALL MACHINES HAVE BEEN FULLY RECONDITIONED LIKE NEW
READY FOR SHIPMENT AND INSTALLATION
LOCATED NEAR PORTO PORTUGAL
IMMEDIATELY AVAILABLE
6
The SICAR CL2NRT wide-belt sander
Location
Gorzów Wlkp.
Conditions of delivery
Cost of delivery
to be agreed
Start type
to be agreed
9bw7dkw
Description
Comments
dwywałowa with a boot
one motor feeds two shafts
5
Serial No. 67894
Belt width 75mm
Table size 75mm
Bpz9cccxtl
Input 400/3/50hz
Belt speed 30 / 34 m/sec
RPM 3000/3400
Length 1000mm
Width 400mm
Height 950mm
Nett weight actual. 120 Kgs.
4
Table size 2000 x 800 mm
Belt speed 8-25 m/s
Table height adjustment 0 - 630 mm
C2s7xbvk
Belt size 7100 mm
Floor space 3600 x 2000 mm
Machine height 2650 mm
6
5
Tumbler dryer , Make Pink GmbH Thermosysteme (D), Type RTSD-Ex 100, No. 2008 4817, Year of construction 2008, Material Stainless steel 2.4602 (Hastelloy C-22), Working pressure 0.5 Bar, Vacuum possible , Working pressure jacket 6 Bar, Capacity 100 Ltr., Diameter 600mm, Length/Depth 640mm, Inlet dia. 20mm, Outlet dia. 150mm, With jacket , Max. temperature 180 degr. C, Motor 1,5 kW 220-240/380-415 Volt, With switchgear , Floorspace 2,7x1,4 M, Total height 2,3 M, Weight 3000 Kg, CE , Extra Specific...
6
Used Niro Production Minor stainless steel spray dryer.
Rated up to approximately 35 kg/hr water evaporative capacity depending on product.
Chamber measures approximately mm diameter X mm straight side. Unit has top entry spinning disc atomizer.
Unit includes cyclone, fan and is mounted on legs.
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money ...
15
Technical data baler
Manufacturer Bollegraaf
Typ HBC 80 A
Year of construction 1997
Hours of operation 21,545 hours
Press power main press 78 tons
Press power of pre-press 42 tons
Feed channel 1,485 x 720 mm (l x w)
Filling volume 2,9 m³
Theoretic cycle time 22 sec.
Bale size 720 x 1,100 mm (h x w)
Drive power 45 kW
Connected load 60 kW
Iqhvwwr
Tying system 5-fold, vertical, fully automatic
Throughput capacity at a
bulk weight of 20 kg/cbm approx. 9,0 tons/hour
bulk weight of 50 kg/cbm approx....
9
Serial No. AII217083
Input 415/3/50hz 11 kW
Bar 7.5
CFM 78.8
PSI 105
Equipment 575 litre air receiver, MTA air dryer
Length 1200mm
Width 800mm
Bozqw2nehh
Height 1000mm
Nett weight actual. 820 Kgs.
5
band width innen 230 mm
Mvt7vc
length 3 Stück ca. 4.000 mm
Length 2 Stück ca. 2.000 mm
5
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Speed adjustable: 2-18 m/min
-Drive: 0.2 kW
-Belt width: 290 mm
-Length: 1210 mm
-Connection: 230 volts
-Transport dimensions: 1210/540/H285 mm
-Weight: 54 kg
Bi7uhvp0
5
Motor 0,75 kW 220-240/380-420 Volt and 0,37kW 220-240/380-420 Volt, Make Dewaco Ltd (FI), Type FPD-16 Belt Filter Press, No. 01-965, Year of construction 2010, Material Stainless steel, Band speed variabel, Belt width 1600mm, With fluid reservoir , With switch on the gearbox, Floorspace 3,5x2,4 M, Total height 2,6 M, Weight 3400 KG, CE What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination ...
6
The conveyor belt was checked for function in my workshop;
NEW PRICE : 1725 €
- new running cover
- new motor protection
- baffle 50mm high
- height adjustable 800mm-1100mm
- working width : 600mm
-constant belt speed 4m/min
Owy2v
15
Technical data baler
Manufacturer BOA Machinefabriek B.V.
Type 2020.18.D (CU25LB)
Year of construction 1997
Hours of operation 40,564 hours
Press power main press 43 tons
Specific press capacity 4.9 kg/cm2
Feed channel 1,200 x 1,000 mm
Filling volume 1,3 m3
Cycle time under operating conditions 22 sec.
Bale size 1,100 x 800 mm
Drive power 18 kW
Connected load 25 kW
Tying system 4-fold vertical, fully automatic
Throughput capacity at a
bulk weight of 30 kg/cbm approx. 4,2 tons/h
bulk weight of...
Table dimensions 3000 x 1000 mm
throat 1000 mm
Gi0c9dpsm
motor power 7,5 kw
sanding belt measurements 7800 x 150 mm
stroke of moving table 300 mm
working length 2600 mm
Working width 150 mm
Length of sanding paper 7800 mm
Dust suction hood 180 mm
total power requirement 9,8 kW
5
Colour: Black
GVW: 42.000 kg
Brgxfmypuw
Dimensions of cargo space: 1220 x 255 x 210 cm
Front tyre size: 385/65 R 22,5
Rear tyre size: 385/65 R 22,5
Brakes: Schijfremmen
4
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 80 mm
-Transport roller width: 800 mm
-Total length: 830 mm
-Sprocket: 1/2 "x 11 teeth
-Thread: M8
-Number: 49x rolls available
Msl7n
-Price: per piece
-Weight: 4.1 kg/piece
5
Tray dryer "vacuum", Make Pink GmbH Thermosysteme Wertheim (de), Type VSD-e 300-300-120-2, Machine number 2007 4803, Material Stainless steel 2.4602 (Hastelloy C-22), Working pressure 0.1 Bar, Vacuum possible , Stainless steel housing , Stainless steel trays , Heating surface 0.18 m2, Drying chamber capacity 35 Ltr., Max. temperature 150 degr. C, Number of trays 2, Tray sizes 300x300mm, Distance between the trays 120mm, Max. temperature 150 degr.C., With 1 door , Connection for the vacuum pump D...
6
6.000 €
Bidding plus VAT
24 days left
24 days left
control make: Siemens, type: Simatic Panel, max. grinding width: approx. 1500 mm
Guvc8yj
1
band width 450 mm
length in total 3900 mm
height 1200 mm
Bjx08jptc8
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
14
Technical data for the conveyor belt
Manufacturer Hunkeler Systeme AG, Switzerland
Type GGF 1000
Year of manufacture 12/2018
Drive power 3 kW
Belt speed 0.3 m/second
Length ascending belt 6.800 mm, gradient 32°
Length of gooseneck 1,600 mm, gradient -22°
Effective width 970 mm
Transfer height 3,260 mm
Conveyor belt fitted with vulcanised carriers 40 mm high
Height of side wall of ascending belt, inside 810 mm
Transport dimensions 10,000 x 1,600 x 1,800 mm (l x w x h)
Weight approx. 2,5 t
New pri...
6
Colour: Black
GVW: 39.000 kg
Dimensions of cargo space: 1220 x 255 x 240 cm
Front tyre size: 385/65 R 22,5
Mvyrkc
Rear tyre size: 385/65 R 22,5
Brakes: Trommelremmen
5
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Drive: drum motor van der Graaf type TM215B40-44 RB
-Power: 3 kW
-Speed: 134 m/min
-Belt width: 580 mm
-Length: 3100 mm
-Dimensions: 3100/1110/H440 mm
-Weight: 424 kg
Lgbt2din
5
Continuous fluidbed dryer , Make Niro, Type Flex-XE-060-2/1:0, Year of construction Unknown manufacturer plate is missing, Material Stainless steel, Surface 1,4 M2, Bed sizes 1900x750mm, Product inlet 600x450mm, Product outlet 330x200mm, Number of sections: 3, Air inlet dia. 310mm (3x), Air outlet dia. 500mm, Vibro motor 3 pcs, Motor 0,55 kW 230/400 Volt, Floorspace 2,8x1,6 M, Total height 3,6 M, Weight 2000 Kg What you can expect from Foeth: all our machines are in working condition, and at a r...
6
Used machine
Condition: very good
Year of manufacture: 2003
-tolerance accurate calibrating with the contact roller
-sanding of solid wood 1st unit contact roller 2nd unit link pressure beam
-sanding of veneered workpieces with both sectional pressure beams
-intermediate varnish sanding with either one or two sanding units
Equipment and technical data:
constant working height
grinding width 1350 mm
workpiece thickness min./max. 3 - 150 mm
Operating terminal with 50 program memory locations
CPS ...
1
band width 450 mm
Bjx08tayw9
length in total 3000 mm
height 1000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
15
Technical data conveyor belt
Manufacturer Bollegraaf
Typ HBT 600/2000 x 21.986
Year of contruction 2000 (overhauled 2020)
Drive power 7,5 kW
Length infeed conveyor over all 6,723 mm
Length module infeed conveyor 5,500 mm
Height infeed conveyor over all 1,300 mm
Height side wall infeed conveyor 500 mm
Length elevating conveyor over all 13,923 mm
Lenght module elevating conveyor 13,300 mm
Height side wall elevating conveyor 800 mm
Gradient of elevating conveyor 30°
Length gooseneck 1,340 mm
Lengh...
5
Colour: Red
GVW: 36.500 kg
Dimensions of cargo space: 1220 x 255 x 210 cm
Bowzjj9zf3
Front tyre size: 385/65 R 22,5
Rear tyre size: 385/65 R 22,5
Brakes: Schijfremmen
3
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Transport roller width: 620 mm
-Diameter: 100 mm
-Dimensions: Ø 100/700 mm
-Weight: 24.4 kg
Nmbad
5
Tray dryer , Make Pink GmbH Thermosysteme, Type VSD-EX 650-650-140-4, Machine number 2005 4783, Material Stainless steel 2.4819 (Hastelloy C-276), Vacuum possible , Working pressure jacket 3 Bar, Stainless steel housing , Stainless steel trays , Heating surface 4,7 M2, Drying chamber sizes 670x670x140mm (4x), With jacket , Max. temperature 115 degr. C, Number of trays 4, Tray sizes 670x670mm, Distance between the trays 140mm, Max. temperature 115 degr.C, With containers 4x, Container sizes 650x6...
1
1300kg lbh 9500x1200x450
Wmbv7f8v
2
band width 450 mm
length in total 3000 mm
height 1000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Bjx083r8la
7
Conveyor belt
Length 2500 mm
width 400 mm
Ejection height 900 mm
Belt speed approx. 16 m/min.
Total length 2700 mm
Bsi2buuveo
height 1200 mm
width 700 mm
380 Volt
Weight 340 kg
8
Field of application: Construction
Br2asimvlx
3
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 60 mm
-Transport roller width: 995 mm
-Square holder: 12/8/L10 mm
-Price: per piece
Betuqijfx9
-Number: 28 pieces
-Dimensions: Ø 60/1025 mm
-Weight: 4 kg/piece
5
Tray dryer "vacuum", Make Pink GmbH Thermosysteme Wertheim (DE), Type VSD-e 300-300-120-2, Machine number 2008 4823, Material Stainless steel 2.4602 (Hastelloy C-22), Working pressure 0.1 Bar, Vacuum possible , Stainless steel housing , Stainless steel trays , Heating surface 0.18 m2, Drying chamber capacity 35 Ltr, Max. temperature 150 degr. C, Number of trays 2, Tray sizes 300x300mm, Distance between the trays 120mm, Max. temperature 150 degr.C., With 1 door , Connection for the vacuum pump DN...
1
Bunker used, is now redundant. Has a small conveyor belt in the middle
Ytnvcs
2
band width 450 mm
length in total 3000 mm
height 1200 mm
total power requirement kW
N7h9b
weight of the machine ca. t
dimensions of the machine ca. m