Used Veneers for sale (527)

Condition: good (used), Year of construction: 2001, functionality: fully functional, 2N RR N.2 nastri a rullo per legno massiccio e impiallacciato Two roller belts for solid wood and veneer 2 B~nder/Rollen f~r Massivholz und Furnierholz 2 rubans • Bandschwingung-und-zentrierung mit pneumatischem System und geschlossenem Stromkreis ~ Lsdpfxev E I U Ue Abyohn rouleaux pour bois massif et plaqu~ 2 Bandas de rodillo para madera maciza y chapeados • Vorschubgrenzer mit Notaus • Bremse f~r Banddrehungsarretierung • Schwingende bandspannende Rolle • Dr~ckrollen aus Stahl • Yo rd ere Sicherheitstange • Mechanische Dickenzeige • Teppichschutzvorrichtung mit 2 Eingaberollen und 2 Ausgaberollen • Absaug~ffnungen 160 mm, the Band • CE Yorschriften

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Lsdpfox Iwfmjx Abyehn Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: ready for operation (used), working width: 2,000 mm, roller diameter: 350 mm, Glue spreader for plywood manufacturing. Width or length of the glue rollers: 2000 mm Diameter of rollers: 350 mm Ljdpfszazftjx Abyshn Rollers are covered with some Polyurethane material. The unit is frequency controlled for the feeding speed.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, documentation/manual, • Suitable for pressing veneer, fire-resistant panels, decorative paper, etc. • Suitable for laminating furniture panels, partition walls, wooden doors, or for laminating all kinds of decorative materials onto composite boards. • The press can also be used for drying or smoothing veneer. Pressing force 100 tons Dimensions of heating plate 3000 × 1300 × 42 mm Number of working layers 1 layer Number of heating plates 2 pcs. Distance between heating plates 200 mm Surface roughness of heating plate Ra ≤ 1.6a (2.5 μm) Lhodpfx Aozhv Svobyjn Cylinder diameter Ø 85 mm, material: steel Number of cylinders 8 pcs. Power of hydraulic press motor 5.5 kW Heating method Heating oil Heating power 24 kW Power of circulation pump 1.5 kW Pressure per cm² 3.07 kg/cm² Maximum heating temperature 130°C Press dimensions 4200 × 1670 × 1900 mm Press weight 5300 kg

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: CYLINDER 2nd BELT: COMBINATION UNIT CYLINDER/SHOE FOR SOLID WOOD, VENEER, AND INTERMEDIATE GRINDING FOR LACQUERING - Usable WORKING WIDTH mm 1350 - BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - STEEL CALIBRATION CYLINDER mm 180 Lhjdpfx Abjzh Rufoysn - Rubber-coated GRINDING CYLINDER mm 180 - GRINDING SHOE WIDTH mm 50 - BELT MOTOR POWER KW 14.7 - BELT SPEED m/s 18/16 - FEED MOTOR POWER HP 0.75 - Adjustable gearbox with steplessly adjustable feed speed m/min 4/20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 PCS. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tension - 3 PCS. PRESSURE ROLLERS; with rubber coating - EMERGENCY STOP SWITCH in the infeed area Availability: short-term Location: Flörsheim

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm Lhodpfxjyz T Ans Abyon

Condition: used, Year of construction: 2014, functionality: fully functional, Equipment: CE marking, OTT TWISTER Edge Banding Machine This is a single-sided edge banding machine, operated from the right side, designed for applying and processing edges made of veneer, plastic, and solid wood. Year of manufacture: 2014 Lsdpfx Aezr Nkgjbyehn 1. Technical specifications and dimensions: • Banding thickness: 0.4 – 10 mm. • Part width: minimum 70 mm. • Part height: 8 mm to 60 mm. • Part length: minimum 150 mm. • Continuous speed: 18 m/min. • Working height: 880 mm. • Machine dimensions: height 1,600 mm, width 1,100 mm, length 7,200 mm. • Weight: 3,250 kg. • Operating voltage: 400 Volt, 50 Hz. 2. Key working units: • Pre-milling unit: equipped with 2 motors (2.2 kW, 12,000 rpm) for milling the front surface. • Glue application (Vario-Melt): application roller with dosing automation and modular Combi Melt system for EVA and PUR adhesives. • K13 trimming unit: 2 motors (0.2 kW) for precise edge trimming with a tilting option of 0/5°. • Rough and fine milling unit: for processing edge overhang and radius milling. • AKF copying milling cutter: automated unit for longitudinal and corner processing with a function for veneer and postforming. • Scraping units: includes a radius scraper ZKc (for PVC edges) and a surface scraper ZKf (for removing excess glue). Accessories • PUR package: includes a quick-change head and a hopper. OTT TRANSLIFT Transport System This system is used for automatic handling of parts and returning them to the operator. • Manipulator: single-column, with suction, maximum load capacity 60 kg. • Movements: rotation 0°/90° and transfer to the return belt. • Return conveyor belt: width 900 mm, length corresponds to the machine. • Part limits: maximum length 3,000 mm, maximum width 1,300 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 5000 is a powerful portal nailing machine for the automated production of pallets and crates. With up to eight nailing heads, two work areas, and a 750 mm stroke on the Y-axis, it offers a high production capacity for a wide variety of nailing patterns. The system features a 12-inch touch display, height adjustment, and individual control of the nailing heads. Downtimes are significantly reduced by the optional offline programming, as programs can be created and simulated outside of production. The automatic path optimization also ensures short travel distances and increases the cycle output while reducing resource consumption. Lhodpfeztanxox Abyon General advantages: Modularity: Adjustable machine length and configuration to meet specific production requirements. Flexibility: Suitable for small pallets (two stations simultaneously) and large pallets (full work area). Automation: The machine optimizes the work process through automatic calculation of the most efficient and fastest nailing path. Nailing table with nailing bridge: Construction: Robust frame with a 65° inclination angle for ergonomic operation. Machine length: approx. 8500 mm (extendable/shortenable by 2000 mm or as per customer request). Work area: 1 pallet: max. 6000 x 1700 mm 2 pallets: max. 2500 x 1700 mm per pallet Stop system: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, cross rails, and top boards Rivet plates can be used at all positions Pre-fabrication of the skids Optional special equipment with laminated veneer lumber for custom templates Optional aluminum clamping system Nailing bridge: Frequency-controlled for positioning the nailing heads Equipped with 6 nailing head units including feed cylinder, nailing head holder, release and nailing head shoes for limiting the insertion depth Manual nailing head quick adjustment for different pallet formats Safety features such as collision monitoring (the movement of the feed cylinder is constantly monitored) Start button directly on the nailing bridge Nailing heads: Type: depending on customer requirements (Bea, Bostitch, Max, Fasco,…) Nail capacity: Up to 90 mm nail length (longer nails available upon request) Option: Maxi-Coil magazines for up to 1000 nails Programming and control: Easy operation: Intuitive programming incl. visualization of the product to be nailed (pallets and crates) Control: Siemens PLC with touch panel Functions: Pallet programming directly on the control panel Pallet and nail counters, the machine stops as soon as the nails are used up Storage of created pallet programs Remote maintenance via internet connection Multilingual operation (German, English, Czech, Polish) Safety equipment: Emergency stop button on the machine and on the control panel Emergency stop at the start on the nailing bridge Option: non-contact safety laser scanner on the nailing bridge

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm Lhodpfx Ajznmb Iebyen MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: used, Year of construction: 2022, Belt width: 150 mm Lhsdpfx Abozq Dczeyen Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Year of construction: 2011, condition: excellent (used), 2 pneumatic shelf presses for edging and veneering. Type PNP Working area: 1250x2500 mm Weight: 1940 kg Presses are fully operational and in use. Ledpfx Aey Avb Aobyohn For any questions, please contact: Piotr Żołnierczyk - 606 666 023

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Ledpfx Aoy A Sq Tobyjhn Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 Lsdpfx Abezuyi Esyshn - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Lodpfxszuyplo Abyohn Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm Single-sided edge banding machine Manufacturer: IMA Type: Novimat Contour/I/G80/790/L20 Year of manufacture: 2009 Technical data - Electronically controlled feed speed: 6-30 m/min - Edge material thickness: 0.3 - 3.0 mm - Paper, PVC, and ABS edge bands: 0.3 - 3.0 mm - Veneer: 0.5 mm - 3.0 mm - Wood strips: 0.8 - 20 mm - Edge height: 14 mm - 65 mm - Maximum edge overhang from above: up to 8 mm edge thickness - 5 mm, over 8 mm - 2 mm Workpiece size: - Minimum workpiece length in the feed direction: 150 mm - Minimum workpiece width: 25 mm, thickness: 65 mm - Minimum workpiece thickness: 8 mm (without profile trimming blades) or 12 mm with profile trimming blades - Maximum workpiece thickness: without corner copying, max. 60 mm (max. 40 mm with corner copying) - Smallest element: 150 mm x 150 mm or 65 mm x 300 mm Note: *65 mm with a maximum piece thickness of 25 mm The edge banding machine is equipped with: - Hand-adjustable guide rail for inserting workpieces - Trimming units 08.376, 2 motors, each with 4.5 kW, spindle speed 9000 rpm, 150 Hz - Heating unit for warming the workpieces - Gluing unit with drive 283.1513, featuring a tightly sealed oil pan, drive arranged with glue pot content of 0.8 l and glue application height of 60 mm, with a pneumatic quick-clamping system for hot melt and PU adhesives, magazine for edge banding rollers and strips, edge banding roller diameter 800 mm Lhsdpfx Aszuyprjbyjn - Glue pellet preheating unit with automatic feeding of glue pellets from a 30 kg container. - Automatic preheating unit for PU cartridges with a weight of approx. 2.5 kg and a capacity of 8-10 kg/h - Trimming unit 08.42/30/B, pneumatic adjustment of the saw blades from 0 - 25°, 2 motors 660 W, 200 Hz with frequency inverter and braking function - Pre-milling unit 08.055, swiveling up to max. 30° - Multi-chamfering unit 08.342, 2 motors, 660 W, 400 V, 200 Hz, 12000 1/min - Cleaning agent dispenser - Profile trimming blades 08.519 - Surface trimming blade 08.521 for removing excess glue from glue joints - Buffing unit 08.617-2, 2 motors with 180 kW, 50 Hz, 1400 rpm - Groove/milling unit with one motor Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Lodpfxozuzw Ds Abyehn Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Lhsdpfoyzxkwjx Abyon Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: new, - New -with swiveling sanding unit andoscillating sanding belt F version forVeneer grindingDescription:- The grinding unit can be swiveled up to 45 ° using a lever- The machine stand made of welded steelguarantees high torsional rigidity andvibration-free work.- Oscillating sanding belt with separateGear motor for better grinding results- Oscillation can optionally be switched on- Sanding sole with graphite coating for a higherService life of the sanding belt- Height-adjustable sanding table for usethe entire width of the sanding belt- Height-adjustable additional table with suctionfor grinding radii- The spring-loaded belt tension is the sameTape length differences independently.- With double suction- Extendable roller table extension- With rubberized sanding roller- Veneer edge grinding device with contact shoewith fine adjustment, relief rollersand fence rulers- With grooved infeed ruler for veneer protrusions- Quick changeover of veneer edgespossible on solid wood sandingTechnical specifications:Dimensions and weightsLength approx. 1900 mmWidth / depth approx. 900 mmHeight approx. 1350 mmWeight approx. 290 kgConnection suctionExtraction nozzle diameter 140/100 mmDrive powerOscillation motor 0.25 kWWork table (s)Working table length 960 mmWorking table width 350 mmWork table height adjustment 230 mmHeight adjustment longitudinal table 230 mmCross table height min. 720 mmElectrical dataConnection voltage 400 VMains frequency 50 HzGrinding unitSanding belt length 3000 mmSanding belt width 200 mmBelt speed (s) 20 m / sSanding surface length 1050 mmSanding surface width 200 mmOscillation stroke 20 mmItem No. 5363001 Lodpfx Ajvwgbwebyjhn

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 Lsdpsyh Hwuofx Abyjhn - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Lodsyffxzspfx Abyshn Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: new, Year of construction: 2026, Table size: 3000 mm x 1400 mm Operating vacuum: -0.9 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating system temperature: max. 140 °C Heating power: 24 kW Machine length: 3100 mm Machine width: 1750 mm Lsdevzbbyjpfx Abyshn Machine height: 2200 mm Weight: 950 kg

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum Ledou R S Erjpfx Abyshn ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Lhedpfjgr Ufhox Abyjn Extension table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Sanding unit swivels: yes Dust extraction port: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 810 mm Weight: 290 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Lhedpfx Abjb Uhr Asyjn -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Dimensions: mm -Weight: 65 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz Lsdpfx Ajb Uht Nsbyjhn -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg