Used Veneers for sale (526)

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Prjdpjwq Sc Sjfx Akijc Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Pedpfx Akex Iwfmoiorc Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: new, Year of construction: 2025, Exhibition machine Year of manufacture: 2025 Equipment and technical data: Predpfszh Rufex Akiec MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: CYLINDER 2nd BELT: COMBINATION UNIT CYLINDER/SHOE FOR SOLID WOOD, VENEER, AND INTERMEDIATE GRINDING FOR LACQUERING - Usable WORKING WIDTH mm 1350 - BELT LENGTH mm 1370 X 2150 - MAX. WORKPIECE THICKNESS mm 160 - STEEL CALIBRATION CYLINDER mm 180 - Rubber-coated GRINDING CYLINDER mm 180 - GRINDING SHOE WIDTH mm 50 - BELT MOTOR POWER KW 14.7 - BELT SPEED m/s 18/16 - FEED MOTOR POWER HP 0.75 - Adjustable gearbox with steplessly adjustable feed speed m/min 4/20 - HEIGHT ADJUSTMENT MOTOR HP 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 PCS. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tension - 3 PCS. PRESSURE ROLLERS; with rubber coating - EMERGENCY STOP SWITCH in the infeed area Availability: short-term Location: Flörsheim

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Prsdpfjy A Sq Tjx Akijc Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Transport available at additional cost! Prsdpfx Asyzxkwjkisc Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm Prjdjyh Hwuopfx Akijc - Height: 2,100 mm - Location: not in stock

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Prodpfx Aepbvqvekisc Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Very well-maintained and robust OTT heating plate press, type ST 2511/80, with a pressing force of 80 tons. The press is ideally suited for gluing and veneering panels, furniture components, and other wood-based materials. The machine is in very good used condition. Technical data: Manufacturer: Paul OTT Type: ST 2511/80 Year of manufacture: 1987 Machine no.: A 6815 Pressing area: approx. 2,500 × 1,100 mm Pressing force: 80 t Specific pressing pressure: approx. 2.9 kg/cm² Total power: 15.6 kW Rated voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 24 A Heated press plates Temperature display for upper and lower heating plates Pressure and pressing time setting Safety tripwires Condition: very good Equipment: Upper and lower heating plates Hydraulic pressing device Adjustable pressing pressure Adjustable pressing time Temperature monitoring Safety tripwires Transport possible for an extra charge! Pedpfx Akjzxzbdjijrc The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: good (used), Code: 0449 Pjdezmyp Aepfx Akijrc Brand: DE STEFANI Model: MV 1 Automatic single-head edge sander for wooden edges and profiles, solid wood, veneered and various Sander for profiles and rebates with interchangeable pad, tiltable -15° to +90° 2-speed motor rpm 710/1420 – Hp 1,3 – 2,5 Working height mm 100 Automatic feed with variable speed Adjustable inlet guide Compressed air 6 atm Exhaust outlet diameter 100 mm Overall dimensions mm 2100 x 1600 x 1350 h Weight kg 950

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. Predezk N Ehopfx Akiec - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). Predpfxjz N Shzo Akiec During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: used, Year of construction: 1998, Complete line Sign press oil Prsdpfx Akjz Dfyfeijc Power 31 kW 250/130 cm Press entry and exit automation Ejector to die-head? Actually 'moulurière' refers to 'molder' or 'moulding machine'. 'Ejecteur vers moulurière par exemple' -> 'Ejector towards a moulding machine, for example' Glue applicator ORMA SC2R-300 at press entry 380 V Available immediately

Condition: new, CNC Panel Saw Wehrmann WT-38/1040 New machine For the conventional cutting of workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil or veneer Panel dimensions + data (finished panel): Length: from 140 mm Width: min. (finished dimension) 38+38 mm Width: max. (finished dimension) 520+520 mm (asymmetrical cutting is possible) Thickness: 8 mm - 40 mm Weight: approx. max. 30 kg Workpiece shape: rectangular Basic structure: - User-friendly combination machine with adjustable zero line - All drives and adjustments are servo-controlled - The machining motors are frequency-controlled. - Stable steel welded construction - Workpiece transport is carried out by means of a transport belt and height-adjustable top pressure. Base machine: - Sound-absorbing/protective hood with safety interlock - The required connection nozzles for an external extraction system with an air velocity of min. 28 m/sec. (underpressure 2480PA) - A compressed air connection incl. maintenance unit. - Integrated control cabinet with cooling unit for operating the machine at an ambient temperature of 10 - 45 degrees Celsius - PC control Beckhoff - Safety and protection devices according to CE guidelines - CE marking Feed rate v= 5 - 40 m/min servo-controlled drive Electronic height adjustment of 5 - 45mm adjustable via Beckhoff servo axis Stop ruler made of Teflon on the right side of the machine adjustable via Beckhoff servo axis Infeed ruler on the left with pneumatically sprung unit adjustable via Beckhoff servo axes Machine equipment: Unit 1: Slitting saw, frequency-controlled Milling stand with column guide and connecting plate Motor Perske 4.4 KW 50 Hz 400 Volt 4500 RPM. Tool holder D = 35 keyway External + internal thread right / left, controllable via servo drive, operating in the same direction, not swiveling with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Saw blade max. 350 mm without tools Flow-optimized extraction hoods Unit 2: Saw motor, frequency-controlled Milling stand with column guide and connecting plate Saw motor not controllable, operating in the opposite direction Motor Perske 6 KW 50 Hz 400 Volt 5000 RPM. Tool holder D = 35 wedge shaft with external + internal thread right / left Pedpfozvdw Nex Akiorc Saw blade max. D400 mm without tools with manually adjustable splitting wedge with height adjustment via Beckhoff servo axis Lateral adjustment with mechanical digital display Flow-optimized extraction hoods Beckhoff control technology - PC-based control system with integrated PLC and electronic path control - Virtually unlimited program memory - Operation via keyboard / mouse / touch - Reporting system for operator and error messages - MDE Basic for recording machine data, production time, set-up time, downtime, fault time, quantity and adjustable recording period - Fast data exchange between control and I/O component via EtherCat - Uninterruptible power supply for panel PC - Feed lock for adjacent machines or transport - Powerful panel PC with integrated 15.6 inch display with touch screen, integrated keypad, keyboard and mouse - USB port - Fast EtherCat interface (field bus) - Ethernet network connection RJ45 - Operating system Windows with TwinCat 3 system for real-time control

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality Columbus Presstechnology vacuum membrane press. Type: Multimat Special Model: M15090L Year of manufacture: 2015 Prjdpsy I Ugusfx Akisc The machine is in good, well-maintained condition and is ready for immediate use. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / condition: Functional and operational Robust industrial design Membrane included (used, but functional) Clear and easy-to-understand control panel Ideal for wood, furniture, or plastic processing Applications: Veneering Film coating Mold making / plastic processing Prototype production Inspection is possible – the machine is ready for operation. A Renner RS 75 compressor can be purchased for €1,000.

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle Predpfx Akohzlr Ioioc boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 18,5 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: used, Kündig ENORM 1300-2 wide-belt sander for the precise calibration and fine sanding of solid wood, veneer and wood-based materials. This robust industrial model, featuring two sanding units and a cleaning brush, delivers high material removal rates and precise surface quality in the furniture and interior fit-out sectors. Ideal for craft and industrial businesses with high quality standards, including a set of sanding belts. Technical data: Pjdpfx Aezryxnskiorc - Working width: approx. 1,300 mm - Grinding units: 2 - Clearance height: max. approx. 150 mm - Motor power: 18.5 & 15 kW

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Glue applicator also available. Pjdpfx Aozryzcekierc Technical data: - Working length: 3,090 mm - Pressure: max. 104 t

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Prodps Af E Iljfx Akiec Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: excellent (used), Hebrock 3006 airtronic edge banding machine Well-equipped, can be inspected before purchase. PRE-MILLING CUTTERS, Pedpfxo Agu Iwj Akiorc Glue application via roller, Includes a glue dispensing system, The glue pot is replaceable, A second tank is included, Airtronic system for up to 40mm, Pneumatic pre-trimming guillotine, Pressure rollers, Liquids, Ready-to-use trimming saw, Two R1 – R2 top-and-bottom milling units, Pneumatic 3-point adjustment, Includes two replaceable corner rounding units R1, R2, R1 profile trimming tool, R2 profile trimming tool, Flat trimming tool, Maximum veneer thickness in a roll: 3mm.

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Prjdpfo Ad Rg Dox Akiec Storage location: Rieth

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Prsdpfxs Afxyvo Akijc Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Condition: ready for operation (used), Veneer press with 30 floors Psdpfx Aeyh A E Uokisrc Size of press plates 3000 x 1650 mm Hydraulically operated. Hot water for heating In-feed system and out-feed system included

Condition: ready for operation (used), working width: 2,000 mm, roller diameter: 350 mm, Glue spreader for plywood manufacturing. Pedezazftspfx Akisrc Width or length of the glue rollers: 2000 mm Diameter of rollers: 350 mm Rollers are covered with some Polyurethane material. The unit is frequency controlled for the feeding speed.

Condition: used, TIGER TM 6B HYDRAULIC HOT PRESS – 3000 × 1300 MM – 90 TONS Professional industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, and companies specializing in wood-based panel production. The machine is equipped with large 3000 × 1300 mm working platens, a hot water heating system, and 6 hydraulic cylinders, providing a declared total pressing force of 90 tons. Particularly suitable for veneering, gluing, laminating, and pressing wooden panels and wood-based materials. Main Features and Technical Specifications Manufacturer: TIGER Pedpsxvy Siefx Akijrc Model: TM 6B Machine type: Hydraulic hot press Useful platen dimensions: 3000 × 1300 mm Total pressing force: 90 tons Number of hydraulic cylinders: 6 Heating system: Hot water Heating connection: Prepared for connection to an external heating system Heavy-duty industrial construction Hydraulic platen movement system Guide columns for platen movement Front control panel Pressure gauge for monitoring hydraulic pressure Safety system with front emergency stop cable Applications Veneering of wooden panels Gluing of laminates and surface coverings Pressing of MDF, chipboard, and plywood panels Manufacturing of furniture and furnishing components Industrial hot gluing and bonding applications

Condition: excellent (used), BRANDT KDF 440 edger, well-equipped, CNC-controlled units operated from the control panel Liquids Pre-routing cutters Plate heating Glue application by roller Exchangeable tank Pneumatic preliminary guillotine Pressure rollers Trimming knives for final trimming Multi-routing unit, top and bottom, R1-R2 Prsdo Af Uzaepfx Akisc Corner rounding unit, R1-R2, pneumatically switchable Multi-profile edger, R1-R2 Flat edger Liquids Polisher Max. part height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 8 m/min Very good condition for a used machine Original mileage 400,000 meters