Used Premelter for sale (70)

Condition: used, 2 units available. For further information, please refer to the attached photos. Pjdpjd Tmabofx Acvopp

Condition: used, Year of construction: 2005, Perfect binding line Kolbus KM 473 Year: 2005 Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 Psdpfoyhdd Usx Acvjpp - ATC thickness control - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Note: Solema book block feeder shown on the photos is not included in the price!

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Ppjdpfov N U U Nsx Acvop Gathering machine Kollbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Description: - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Counter stacker - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Description updated

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm Pedpfjyr Hk Sox Acvepp size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A Psdpfexuad Ajx Acvspp - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, edge thickness (max.): 22 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, The machine has the following configuration: Pre-milling unit Automatic, timer-controlled intervention and positioning via NC Edge preheating lamps Edge band magazine Glue pot for EVA hot-melt adhesive Premelter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine finishing and contour trimming unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, timer-controlled intervention End cutting unit RB02 Positioning by NC Glue scraping unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Feed pressure with rubber belt Panel support guides with NC positioning CE marking Ppjdpfsyxndbsx Acvop The machine is sold and delivered as is (“as seen and approved”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 7673

Condition: excellent (used), Year of construction: 2016, operating hours: 6,500 h, functionality: fully functional, 12 Gathering Stations Müller Martini 3692 Tensioning/Handfeeding unit 3692 ASAC Automatic Caliper Control 3715 Reject Delivery Automatic Signature Recognition Cameras: ASIR 3 12 clamps Muller Martini 1577 Pantera Touchscreen control with automatic set-up Hotmelt spine & Side gluing unit with premelter Ppodpjyufk Aefx Acvop Hotmelt side glue with premelter PUR Nozzle Spine Gluing Unit Curved conveyor system 90 Muller Martini 3520 Conveyor belt Muller Martini 3520 Conveyor belt with escape gate 3520 Müller Martini Granit 3 Knife Trimmer 3676 Müller Martini UNO Stacker 1534

Year of construction: 1997, condition: used, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station Podeb Hppfjpfx Acvjpp • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer optionales Equipment:--not included-- • - Opticontrol signature image reader

Condition: ready for operation (used), Size: 510 x 290 x 65 mm Speed: 10.000 c/h Equipment: Psdpfx Asdyk N Tjcvepp gathering machine: • chain tensioner with hand feeding station controls: • missing and double sheet control intermediate elements: • spiral raceway • hand fed • jogging element • book block feeder • endsheet feeder perfect binder: • 32 clamps • jogging station • resting table • fold pressing station • milling and roughening station • hotmelt spine gluing unit • cam controlled • trolley spine gluing unit • PVA (cold glue) side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring • cover pressing station • 2. cover pressing station • lay down device

Condition: good (used), Year of construction: 2001, Format: max 360 x 310 mm; min 140 x 100 mm Book block thickness: max 60 mm; min 3 mm Cover format: max 642 mm; min 203 mm Output: max 18,000 c/h Equipment Gathering machine - Clamping element - 18 feeder 3681 - Diverter 3714 Controls - Double and missing sheet control - ASAC automatic self-adjusting caliper Intermediate modules - 2 vibrating elements 3642 - coupled with adhesive binder - Commander - 41 clamps - Infeed channel with vibration direction - 2 milling stations - 2-fold combi spine processing - 2 hotmelt spine gluing units - Hotmelt side gluing unit - 3 premelters - SF shingle cover feeder - SF cover pressing Psdjq Rv Htepfx Acvspp - 2nd SF cover pressing unit - Plate chain Laydown conveyor Cooling section - inline with - Zenith S three-knife trimmer Optional accessories---not included in the scope of delivery-- - compensating stacker - film wrapper - palletizer

Condition: good (used), Year of construction: 1999, functionality: fully functional, Size: max 480 x 320 x 80 mm; min 140 x 100 x 2 mm Ppodpotuwiljfx Acvsp Cover size: max 642 mm; min 203 mm Book block thickness: max 80 mm; min 2 mm Speed: max 7.500 c/h; min 1.200 mm Equipment gathering machine • hand feeding station • 21 feeders 3691/18 • reject gate 3614 • pile delivery Universo 244 • seperation element • jogging element perfect binder • 30 clamps • PVA (cold glue) spine gluing unit • hot melt side gluing unit • IR intermediate dryer • gauzing station • stream cover feeder • 2 pressing stations • HF dryer optionales Equipment:--not included-- • PUR spine gluing unit • premelter for PUR gluing unit

Condition: good (used), Equipment: gathering machine: • chain tensioner with hand fed • 15 stations • criss-cross delivery Ppedpfx Aced R Tgysvop perfect binder • 18 clamps • milling and roughening unit • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • pile cover feeder • cover pressing station • gauzing station • 2. cover pressing station • stack delivery

Year of construction: 1988, condition: good (used), Size: max 460 x 310 x 60 mm, min 125 x 100 x 3 mm Book block thickness: max 60 mm, min 3 mm Speed: max 6.000 c/h Equipment: gathering machine • chain tensioner with hand feeding station • 16 stations • machine number 62 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed perfect binder • serial number 58 • 20 clamps • jogging station Ppjdpfol Dpcwjx Acvop • resting table • fold pressing station • milling and roughening station • brushing station • hotmelt spine gluing unit • cam controlled • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device standard accessories • pv pressure-vacuum pump • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools optionales Equipment:--not included-- • extending of the gathering machine • modification of the conveyor belts • three knife trimmer • compensating stacker • shrink wrapping • optional equipment • palletizer

Year of construction: 1992, condition: good (used), Size: max 510 x 305 x 60 mm min 140 x 100 x 3 mm Cover size: max 640 mm min 203 mm Speed: max 10.000 c/h Equipment: gathering machine - 15 feeders 256 perfect binder - 20 clamps - milling and roughening station - hot melt spine gluing unit - hot melt side gluing unit - premelter - S stream cover feeder - cover nipping and pressing station - lay down device optionales Equipment: --not included-- - PUR Leimbecken Ppedpfeh Atbcsx Acvop

Year of construction: 2002, condition: good (used), Built in 2002 Size: max 460 x 310 x 60 mm min 125 x 100 x 3 mm Product thickness: max 60 mm min 3 mm Speed: max 8.000 c/h Pjdpjgi Nk Aefx Acvepp Equipment gathering machine 18 stations gatherer ZU 840 gathering pockets with ATC (auto section thickness control) reject unit AS 840 Machine can be extended with more gatherers controls missing and double sheet control intermediate elements jogging element Copilot 27 clamps milling and roughening station 2nd hotmelt spine gluing unit hotmelt side gluing unit 2 premelters stream cover feeder cover pressing station 2. cover pressing station lay down device

Year of construction: 2005, condition: good (used), Built in: 2005 Size: max 510 x 310 x 60 mm, min 140 x 100 x 3 mm Book block thickness: max 60 mm, min 3 mm Cover size: max 642 mm, min 203 mm Speed: max 12.000 c/h Equipment Pedpfx Acjpaiqnovepp gathering machine • 18 stations • 18 feeder 3695/24 • reject gate 3614 • 2 jogging element perfect binder • 22 clamps • clamp pitch 24" • jogging station • spine preparation • milling and roughening station • grinding station • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • stream cover feeder • SF cover pressing station • 2nd SF cover pressing station • lay down device

Condition: good (used), Size: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover size: max 642 mm; min 203 mm Speed: max 12.000 c/h Equipment gathering machine • 18 stations • feeders 3691 • reject gate 3614 controls • miss and double sheet control • ASAC automatic self-adjusting calipers intermediate elements • spiral race away • 3 jogging elements • connected with perfect binder • 21 clamps • milling and roughening station • 2 hot melt spine gluing units • hot melt side gluing unit • 2 premelters • SF stream cover feeder • SF cover nipping and pressing station • smooth lay down device conveyor system • ca. 30 m • connected with three knife trimmer • three knife trimmer MM Zenith 3672 compensating stacker • compensating stacker Müller Martini Ppjdpfx Acjrgpqcsvep standards • standard accessories • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools

Year of construction: 2000, condition: good (used), Built in 2000 Size: max 420 x 305 x 60 mm min 200 x 240 x 4 mm Speed: max 6.000 c/h Equipment gathering machine • chain tensioner • 16 stations • 16 feeders 1571 controls • miss and double sheet control intermediate elements • spiral race away • jogging element perfect binder • 18 clamps • infeed chanel with jogger • fold pressing station • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • gauzing station • stream cover feeder • cover nipping and pressing station • lay down device standard accessories • 1 set of operator manuals Ppjdpfx Aced Spn Rjvsp • available: immediately optionales Equipment:--not included-- • PUR spine gluing unit • premelter for PUR gluing unit

Year of construction: 2000, condition: good (used), Build in: 2000 Size: max 510 x 310 x 60 mm min 140 x 100 x 3 mm Book block thickness: max 60 mm min 3 mm Cover size: max 642 mm min 203 mm Speed max: 12.000 c/h Equipment gathering machine: 18 stations feeders 3690 reject gate 3614 controls: miss and double sheet control ASAC automatic self-adjusting calipers - ASIR 3 Signature Recognition intermediate elements: spiral race away jogging element connected with Pjdpfx Aegl I Egecvopp perfect binder: milling and roughening station hot melt spine gluing unit hot melt side gluing unit 2 premelters cover feeder SF cover nipping and pressing station smooth lay down device conveyor system: connected with three knife trimmer three knife trimmer Zenith 3672 compensating stacker compensating stacker Uno Stacker 1534 standard accessories: 1 set of operator manuals 1 set of electrical diagrams 1 set of spare part catalogues 1 set of tools condition available: immediately

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, throughput speed: 2,000 mm/s, Equipment: documentation/manual, Built in 2008 Size max 320 x 430 x 70 mm min 105 x 140 x 2 mm Book block thickness max 70 mm min 2 mm Cover size max 435 x 650 mm min 140 x 208 mm Speed max 2.000 c/h Length 3.700 mm Ppsdjuyx Avopfx Acvep Width 1.400 mm Height 1.300 mm Equipment milling station • dust extraction • PUR gluing unit • premelter for PUR glue • gauzing/- back stripping station • pile cover feeder • cover pressing station • belt delivery • packer stack delivery standards • 1 set of operator manuals • 1 set of standard tools • information: • condition: cleaned in very good working condition • location: Germany Helmstedt

Year of construction: 2003, condition: good (used), Size: max 370 x 320 x 50 mm, min 140 x 105 x 2 mm Mechanical speed: 4.000 c/h Equipment gathering machine: • 2 additional handfed stations • Wohlenberg Sprinter 7009 • 16 stations • missing sheet and double sheet control Ppedjlzh Dispfx Acvsp • criss-cross delivery perfect binder • 15 clamps • spine preparation station • milling and roughening unit • dust extraction • fume extraction • hotmelt spine gluing unit • hotmelt side gluing unit • 2 premelters • pile cover feeder • plates-chain transport • conveyor system • trimmer Wohlenberg 44 FS 50 standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue

Year of construction: 1997, condition: used, Built in 1997 Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder Ppedpfxenxinke Acvjp • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery optionales Equipment:--not included-- • extending of the gathering machine • Opticontrol signature image reader • conveyer system ca. 20 m • three knife trimmer Kolbus HD 150

Condition: good (used), Year of construction: 2011, Size: max 320 x 485 x 60 mm; min 100 x 140 x 2 mm Block hang-up: 8-15 mm Milling depth: max 4 mm Clamp opening: max 80 mm Paper weight (grammage): min 60-170 g/qm Cover width: 202-710 mm Cover height Drum feeder: 140-490 mm Cover height Stream feeder: 140-470 mm Mechanical speed: 8.000 c/h Equipment gathering machine • hand feeding station • 16 stations • criss-cross delivery perfect binder • 19 clamps • milling station • scoring station • hot melt spine gluing unit • hot melt side gluing unit • PUR spine gluing unit • 2 premelters • premelter for PUR gluing unit • cover feeder three knife trimmer • conveyor belt to trimmer with reject unit Ppodpfx Acjtpx Rkovop • three knife trimmer Euro Trim Pro inserting machine

Condition: good (used), Year of construction: 2008, Built in: 2008 Size: max 320 x 320 mm; min 150 x 145 mm Cover size: max 660 x 320 mm; min 225 x 135 mm Book block thickness: max 65 mm Weight: 2,100 kg Cover thickness: 80-300 g/qm Pile height: max. 150 mm Speed: max 1,350 c/h Type of current: 400/50 V/Hz Overall dimensions: w x h x l 3.610 x 2.910 x 1.80 mm Equipment perfect binder: - 4 clamps - milling station with pressing roller - hotmelt spine gluing unit - hot melt side gluing unit - PUR gluing unit - Premelter for PUR gluing unit . Pjdpfx Aju R Hxgscvepp

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm Pjdpfxoxykdqs Acvjpp min 125 x 100 x 3 mm Book block thickness max 65 mm min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts