Used Veneers for sale (511)

Condition: used, Year of construction: 2020, functionality: fully functional, empty load weight: 385 kg, load capacity: 2,000 kg, construction width: 980 mm, Rotating device Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Phedpfev Dng Iox Aa Eoa

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ZH-3316, overall weight: 3,000 kg, table length: 2,680 mm, table width: 1,450 mm, Purchased new in 2021. Very good overall condition. Phedoxzrfxjpfx Aa Eoa Ideal for cutting veneer, cardboard, paper, etc., and suitable for high production volumes. All essential settings for cut quality and precision are conveniently located on the front of the machine. Highly precise motorized rear stops, controlled via the digital display on the control console. Cutting parameters are adjusted on the console and can be fine-tuned using a handwheel, allowing for quick and accurate setup. Photoelectric safety: safety sensor protects the operator during blade operation. Emergency stop with access at the front of the machine. Cutting line illumination. Stroke counter. Technical specifications: • Maximum cutting length (mm): 2680 • Maximum cutting width (mm): 1450 • Maximum cutting thickness for wet veneer (mm): 60 • Maximum cutting thickness for dry veneer (mm): 30 • Blade size (mm): 2680*140*12.7 • Motor power (kW): 4.37 • Machine dimensions (mm/inch): 4200*2300*1700 • Weight (kg): 25 • 380V 3PHASE 50HZ Extras: Sold with new spare blade and a new Teflon plate.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical specifications: - Belt dimensions: 2600 × 200 mm - Worktable: 935 × 460 mm - Auxiliary table at belt tensioning roller: 350 × 350 mm (with round sanding attachment) - Sanding spindle with rubber rollers, supplied with sanding sleeves Ø 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with separate, maintenance-free oscillation motor - Table height adjustment via handwheel, additionally adjustable relative to the sanding belt (forward and backward) - Sanding unit tiltable from -10° to 90°, pivoted via handwheel with digital angle display - Precise angle accuracy ensured by mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer device - Quick changeover from veneer to solid wood sanding - Height-adjustable idle disk table with adapter for dust extraction at the belt tensioning roller - Large-dimensioned mitre fence with stepless angle adjustment and movable ruler - Extraction: adapters Ø 100 mm on both sides (idle disk table, right and left extraction hoods) - 2 sockets 400 V on the machine base (for machine and feed unit) - Torsion-resistant, solid steel base for high running smoothness and stability - Large worktable with sliding surface - Recess in machine base for pallet truck for easier internal transport Phjdpsxwz I Iefx Aa Esa Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2017, Additional Equipment Hydraulic unit with pump, oil tank, and valves for operating the pressure and auxiliary cylinders Phsdpfx Aex Nkm Hea Eja Hydraulic control unit located at the upper part of the press for maintenance ease Control panel with buttons, selector switches, and a pressure control gauge This CMB PFR-CCL was manufactured in 2017. It features a motorized loading table and an automatic cold press with a maximum pressing force of 160 tons. The press operates with a hydraulic unit and a control panel for precise operation. Ideal for handling large panel sizes up to 5,500 x 1,600 mm. If you are looking to get high quality pressing capabilities consider the CMB PFR-CCL machine we have for sale. Contact us for more information. Application Types Pressing / Laminating

Year of construction: 2025, condition: new, By installing the heaters, we have gained the possibility to speed up the gluing process. After the press has been heated up, the wrapping process takes 5 to 15 minutes. depending on the thickness of the veneer and the glued element. The process is widely used in factories producing furniture, windows, doors and coffins. Podpfx Aogp I Upsa Ejha The flexible membrane enables the gluing of both flat elements, such as: furniture sides, frames and stiles, as well as shaped elements, e.g. panels, door strips and bent fronts. Heaters power 2x2.5 = 5 kW Vacuum pump power 0.75 kW Working voltage 400V Number of phases 3 Operating voltage frequency 50 Hz Working vacuum - 0.8 ± 0.05 bar Working temperature 40-50 ± 5 ° С Maximum temperature 60 ± 5 ° С Length 3050 mm Width 1350 mm Height 1600 mm Protection degree IP2X Noise level ≤ 70 dB Weight 350-400 kg Vacuum pump capacity 25 m3 / h Working dimension 3000 x 1350 mm 700% stretch of the membrane Diaphragm thickness 2.7 mm (+/- 0.20 mm)

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Phodpfjxzfw Uox Aa Eoa Machine width: 900 mm Machine height: 2000 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, Bürkle U60 veneer press hydraulic Pedpfx Asx Af Sbsa Ejha Year of manufacture: 1983 The press comes from a training workshop and is in good condition. Press area: 2200 x 1250 mm Opening height: 400 mm 4 cylinders, pressing force: 600 kN Connected load per heating plate: 7 kW Weight: 3000 kg Dimensions: 2750x1380x1785 mm

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Phsdpfx Aoq A I Aaoa Eoa Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Used machine Features and technical data: - Pressing area: 2500 x 1300 mm - With ELKOM gold-anodised energy-saving plates - Total pressing force: 80 t - Specific pressure: 2.5-3.0 kg/cm² - 6 pressing cylinders, each with 68 mm diameter - Opening width: 300 mm Dimensions: 3080x1550x1800 mm Weight: approx. 4700 kg Availability: Approx. mid-April 2026 Phedpfjxwz Iuox Aa Eja Location: Hesse

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Phjdpfx Asx D D Nnea Eja Application Types Pressing / Laminating

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Phjdpjvx Rg Hofx Aa Eoa Weight: 205kg – German production – Unpainted – DTR documentation – Very good condition – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: excellent (used), Pressing Area: 2500 x 1300 mm Number of Press Cylinders: 4 Total Pressing Force: 90 t Operating Voltage: 3 x 400 V + N, 50 Hz Total Connected Load: approx. 20.3 kW Space Requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3,600 kg Hydraulic Heated Platen Press Under-piston Design ELKOM Electric Heating Plates Pressing Pressure steplessly adjustable via pressure switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating elements Analog temperature display for both heating plates Emergency stop safety cable Rack and pinion equalizer Main switch CE-compliant NEW ALUMINIUM COVER PLATES Note on Used Machines: • Subject to errors in technical data and prior sale. • Quoted prices are ex location, loaded free of charge! Pedpfx Aerivrwea Eoha • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. The buyer is welcome to inspect the machine on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Podexwp S Iopfx Aa Esha Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Phsdpjnzrt Ajfx Aa Eja Maximum panel thickness: 50 mm

Condition: used, Used machine Technical specifications: Phsdpjxuxhaefx Aa Eja - Plate size: 2200 x 1100 mm - Max. opening: 315 mm - Heating medium: Electric - Pressing pressure: 2.7 kg/cm² - Cylinders: 4 Dimensions: 2540 x 1220 x 1850 mm Weight: approx. 2500 kg Availability: approx. end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2014, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and pre-selected number of veneer strips. This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. It's a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine. Application Types Pjdpfsx Nkm Tox Aa Eeha Veneering

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 199224, Veneer machine for sale. 220/380 V, 2.5 kW, 50 Hz Podpox Arm Ssfx Aa Esha

Condition: good (used), overall weight: 5,000 kg, working width: 1,300 mm, plate width: 1,350 mm, Bürkle U140 Veneer Press 4 intermediate plates Plate dimensions: 3050 x 1350 mm Working dimensions: 3000 x 1300 mm 8 hydraulic cylinders Max. surface pressure: 5 kp/cm2 Phedpfxsxn Um Ej Aa Eja Max. operating pressure: 348 bar Heating medium – hot water from central heating Cooling – cooling circuit with WILO pump, expansion tank, piping Weight approx. 5000 kg Plates and hydraulics in good technical condition

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). Phedji E Hp Topfx Aa Esa NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: good (used), Code: 0163 Brand: ITALPRESSE Model: MEC 4/B Hydraulic hot press with water heating for veneer, panels, furniture, custom-made furniture, doors in wood, composite materials, aluminium and various Phodpfswzbfwsx Aa Eoa Technical data: Platen dimensions mm 2500 x 1300 Opening mm 300 N° 4 cylinders Total pressure ton 60 Motor power Hp 1,5 Platen heating by water Boiler Perimeter emergency rope Overall dimensions mm 3100 x 1610 x 1830 h Weight kg 3000

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, VERY WELL-MAINTAINED MULTIPURPOSE SURFACE SANDING AUTOMATON WITH CROSS AND LONGITUDINAL BELT; SUITABLE FOR WOOD CALIBRATION SANDING, WOOD SURFACE SANDING, AS WELL AS INTERMEDIATE COAT SANDING. Maximum working width: 1,300 mm Conveyor belt with vacuum system Conveyor extraction unit with pressure regulator Feed motor: 1.5 kW Feed speed: 3 - 15 m/min CSD – computer-controlled selective pressure regulation technology with 2 mm tolerance compensation Distance between control rollers: 16 mm Pressure shoe spacing: 48 mm Switch spacing: 82 mm Unit configuration: 1) Cross sanding unit Belt dimensions with lamella intermediate belt Abrasive belt dimensions: 15 x 4,800 mm Abrasive belt speed continuously variable, therefore suitable for surface and lacquer sanding 2) Longitudinal sanding unit with combined sanding roller and sanding shoe, hence suitable for both calibration sanding as well as wood and veneer surface sanding Abrasive belt speed continuously variable, therefore also Pjdpjxrdk Ujfx Aa Eeha suitable for lacquer sanding Abrasive belt dimensions: 1,350 x 2,620 mm Control: Machine operation control on the right-hand machine side Up to 20 programs storable Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 t Large selection of sanding belts included

Condition: ready for operation (used), Year of construction: 2009, Additional Equipment Feeding device for efficient and comfortable semi-automatic feeding of veneer strips. Panel automatic for component-matched faces with pre-sorted components and preselected number of veneer strips. This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine. Application Types Veneering Phsdpfx Aasx Nkndo Eoa

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Podjw I E Dpopfx Aa Eoha

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber Phsdpsff Agisfx Aa Eoa hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: ready for operation (used), Year of construction: 2015, Additional Equipment Feeding Device: Efficient and comfortable semi-automatic feeding of veneer strips Panel Automatic: For component-matched faces with pre-sorted components and pre-selected number of veneer strips This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us. Application Types Veneering Pedpjx Nknkefx Aa Ejha