Used Veneers for sale (554)

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: 115 mm Dodpfx Aashq A H Ds Hskt Sanding unit swivels: yes / 90° - 0° Work table: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/s Dust extraction connection: 100 mm Motor power: 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Dedpfx Ajfhqhasa Hekt Heating platens: Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. Dodpfx Aaof Tdwco Hjkt →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet Dkjdpfxjgbkkre Aa Hot --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 3000mm Table size: 960mm x 352mm Auxiliary table: 330mm x 330mm Dsdpfx Aogtdpuoa Hskt Sanding roller diameter: 60mm / 100mm / 120mm Veneer sanding attachment: yes Oscillation: yes Sanding unit swivels: yes Dust extraction connection: 120mm Motor power: 3 kW Machine length: 1900mm Machine width: 900mm Weight: 310kg

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Dsdpfeh T Dvtsx Aa Hskt Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: new, Year of construction: 2025, with hinged veneer edge grinding device, for the adjustment of the chip removal oscillating sanding belt Aggregate swivels up to 45 motor power: 2,2kW belt size: 3000 x 200mm table size: 930x350mm weight: ca.360kg roller: 120mm Dedpspl Ugaofx Aa Hokt Central connection for suction 140mm Included: - Miter fence - undercarriage - Grinding shoe rotatable - can be used from 3 sides - contact roller 65mm - exchangeable - extendable table extension - feed console - CEE socket for feed unit

Condition: new, Year of construction: 2025, Table size: 3500 mm x 1500 mm Pump operating capacity: -0.85 bar Reservoir tank: 100 l Vacuum pump: Becker Vacuum pump capacity: 40 m³/h Noise level: less than 70 dB Machine length: 3600 mm Machine width: 1650 mm Machine width (folded): 850 mm Weight: 480 kg Dedjmftlyspfx Aa Hskt

Condition: new, Year of construction: 2026, CORMAK MM3156C 400V Drum Sander for Wood The CORMAK MM3156C 400V is a technologically advanced conveyor drum sander designed for precise and repeatable surface finishing of flat workpieces. Thanks to its robust construction, smooth operation, and interchangeable drum system, the machine is ideal for sanding solid wood, veneers, furniture boards, as well as metals and plastics. The MM3156C is intended for continuous operation in production facilities and woodworking workshops where precision, consistency, and reliability are essential. Key Advantages Interchangeable sanding drums – allows quick adaptation to different materials such as wood, metal, and veneered panels. Dual drum speed– 750/1440 RPM enables optimal adjustment to the type of surface and required sanding aggressiveness. High precision– a rigid frame with a cast-iron arm and hardened guideways ensures accurate shaft guidance and consistent finishing quality. Mechanical thickness gauge– allows precise setting and monitoring of machining parameters. Self-cooling aluminum drum– accurately balanced and resistant to overheating during continuous operation. Optional brush drums– the machine can be converted into a wood aging/distressing sander with additional equipment. Construction and Technology The CORMAK MM3156C drum sander has been developed for industrial applications. The reinforced sanding shaft design, high-quality bronze bushings, and conveyor belt tensioners ensure long service life and stable, backlash-free operation. A reinforced coupling provides efficient torque transmission from the 1.5 kW motor to the working shaft. The machine features continuously variable feed speed adjustment from 0 to 3 m/min, allowing the operator to match the feed rate to the material type and sanding requirements. The table guidance system, equipped with hardened guide rails and a cast-iron body, effectively minimizes vibration and increases the rigidity of the entire structure. With a working width of 560 mm and a maximum workpiece height of 80 mm, the MM3156C is an optimal solution for both high-volume production and precision custom work. Standard Equipment Aluminum sanding drum Mechanical thickness adjustment gauge Main motor with total power output of 2.0 kW (S1: 1.5 kW, 400V) Variable-speed feed drive (0–3 m/min) Conveyor belt tensioning system Side guide fence for workpiece alignment Ø100 mm dust extraction port Technical Specifications Maximum sanding height 80 mm Maximum sanding width 560 mm Minimum workpiece thickness 3.5 mm Djdpfxjvugf Rs Aa Hskt Minimum workpiece length 600 mm Drum size 133 × 560 mm Maximum material removal per pass 0.5 mm Drum speed 750 / 1440 RPM Feed speed adjustment 0 – 3 m/min Feed motor power 50 W Main motor power (S1/S6) 1.5 / 2.0 kW Dust extraction port diameter 100 mm Weight 145 kg

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no Dkjdpfxjvi H Dis Aa Hot automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders Djdpsdun Nijfx Aa Hskt V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant Dkjdpjdwktkefx Aa Hjt - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Dkjdpfjuxqzusx Aa Hjt Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Dkjdsxl Ha Sopfx Aa Hot Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P 400V Drum Roller Sander is an advanced through-feed sanding machine designed for precise sanding of solid wood, MDF boards, veneer, and other woodworking materials. Equipped with two sanding drums and a 635 mm working width, this model is an excellent solution for serial production and facilities requiring high-quality surface finishing. Main advantages of the machine Two sanding drums with a diameter of 150 mm ensure uniform sanding without the risk of burns or scratches. Conveyor belt system provides smooth transport of the workpiece and stable guidance under the sanding unit. Adjustable feed speed from 1.8–7.3 m/min allows the operator to adapt the working speed to the type of processed material. Dust extraction system with two Ø100 mm ports ensures efficient removal of chips and dust, improving working comfort and extending the service life of components. Solid industrial construction weighing 220 kg provides excellent stability even during intensive operation. Construction and technology The CORMAK MM3166P has been designed with stability, precision, and durability in mind. The main steel frame provides resistance to vibration and deformation. The 2.2 kW main motor drives the sanding rollers at 1800 rpm, enabling efficient removal of excess material, even when processing hard wood species. Dsdpfx Ajxfhh Dja Hekt The 120 W feed motor works together with the adjustable speed control system, allowing the operator to precisely control the sanding process. The large belt width of 635 mm makes it possible to process wide components in a single pass, reducing operating time. Precision and working efficiency The machine provides accurate control of the workpiece thickness in the range of 7 to 130 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without overheating or burning the material. The roller diameter and working roller length (635 mm) provide even contact pressure and a consistent final sanding effect. Applications The CORMAK MM3166P drum roller sander is widely used in: woodworking plants producing stairs, doors, and furniture fronts, factories manufacturing wooden components and panel materials, workshops specializing in wood and veneer restoration, solid wood and veneered furniture production facilities, production of large-area components where repeatability and sanding quality are essential. Standard equipment Two sanding rollers Ø150 mm Conveyor belt with a width of 635 mm Main motor 2.2 kW Feed motor 120 W Dust extraction system with Ø100 mm ports Adjustable table height control Optional equipment Sanding belts with different grit sizes Dust and chip extraction system Mobile base Technical specifications Parameter Value Belt length 800 mm Belt width 635 mm Radius [R] 120 Maximum material thickness 130 mm Main motor power 2.2 kW Voltage 400 V Frequency 50 Hz Speed 1800 rpm Feed motor power 120 W Feed speed 1.8–7.3 m/min Dust extraction port diameter 100 mm Weight (net/gross) 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Roller length 635 mm

Condition: not inspected (used), Code: 0256 Brand: STEFANI Model: ACTIVA 1-73 - CE Standard Dsdpfotpgtwjx Aa Hokt Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 motors : Motors Kw 0,35 - Rpm 12000 Edge Scraping Unit Oscillating sander - Motor Kw 1,5 - Rpm 1400 Brush unit: Motor Kw 0,3 - Rpm 1450 Track speed variator Compressed air 6 bar Overall dimensions mm 8200 x 1500 x 1650 h Weight Kg 3500 Machine NOT reconditioned

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system with a screw conveyor is an efficient industrial setup designed to process large volumes of materials into smaller, more manageable pieces. ♻ The system consists of a powerful shredder capable of breaking down various materials and a screw conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal. Technical data: Shredder: ✔ Power: 18,5 kW ✔ Shaft length: 550 mm ✔ Shaft diameter: 260 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 14 ✔ Granulation: 10-30 mm ✔ Capacity: up to 4 m3/h* ✔ Material discharge opening: 160 mm ✔ Filling opening: 939 x 567 mm ✔ Weight: 1250 kg Dodpfx Aaotpuqye Hekt Screw/snail conveyor: ✔ Length: 4300 mm ✔ Height: 2800 mm ✔ Power: 1,5 kW 1 years warranty or 1000 working hours

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Dedpfx Aajyayzae Hokt Price ex works Transport possible at extra cost!

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber Dsdpfjya I Riex Aa Hskt 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Dedpfxsvxryno Aa Hokt Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Plastic panels, plastic laminate, veneer panels, decorative panels, laminated panels -Manufacturer: Resopal, HPL plastic panels 37 pallets 6710 kg Dkodpfx Aowwh H Tsa Hst -different sizes: see photo parts list -Thickness: 1 mm / 1.4 mm -Sale: only complete -Dimensions: 3200/1330/H1800 mm / 3100/1330/H1850 mm / 2190/1330/H1600 mm -Weight: 3150 kg / 1640 kg / 1920 kg

Condition: used, Year of construction: 2025, New exhibition machine! List price €17,380 net. MOVE – the highly precise vacuum press with an enormous working area for vacuum forming and vacuum veneering of curved workpieces. Featuring comprehensive flexibility due to its absolute mobility and revolutionary folding mechanism, which reduces the base area to 45% when folded. High-precision vacuum press with flap opening, including: revolutionary folding mechanism (reduces the base area to 45%) 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER optional, automatic shutdown when pressure is reached (for large vacuum volume) Pressure regulation from 400 to 900 mbar, analog vacuum pressure display highly elastic natural rubber membrane (up to +130 °C) Membrane quick-change system stable phenolic resin worktop (up to +120 °C), 15-layer glued gas pressure dampers for flap opening vacuum pressure display connection for an external vacuum bag easy-rolling swivel casters FESTO pneumatics and SIEMENS electrical engineering Technical data and dimensions: Working area: approx. 3050 x 1350 mm Internal frame dimensions: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1780 mm Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 kg Storage location: Rieth Dksdpfjyi Hd Hsx Aa Hst

Condition: used, Year of construction: 2020, functionality: fully functional, empty load weight: 385 kg, load capacity: 2,000 kg, construction width: 980 mm, Rotating device Dsdjv Dng Iepfx Aa Hskt Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Dsdpewnr A Hofx Aa Hskt Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW Dkjdpfsxczmzox Aa Hjt - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.