Used Used Transformator for sale (41,725)

Condition: excellent (used), Compressor SCHNEIDER UNM STS 660-10-270 XDK – used – Tank with powder coating, including refrigerant dryer ----- Technical data ----- Tank capacity: 270 litres, Number of cylinders: 1, Maximum flow rate: 660 litres, Effective delivery: 520 litres, Maximum pressure: 10 bar, Kedpfoyyzrbex Ampsdk Motor: 4 kW, Speed: 2,895 rpm, Dimensions (LxWxH): 900x800x1850 mm Quality information: - thorough basic cleaning performed - electrics tested - immediately ready for operation

Condition: used, Cutting optimization system HOLZ-HER – used – PC system with touchscreen, Kdsdpfjyyzq Rox Ampjk label printer, for installation on a vertical panel saw, USB port, network port, includes office version OPTI-V-Base

Condition: excellent (used), Planer-thicknesser KNAPP AD 410 Profi T - used - WIGO cutter block, ground cast iron tables, joint opening tables opening simultaneously, table opening to the rear, infinite feed speed adjustment ----- Technical data ----- Planing width: 410 mm, table length: 1,700 mm, number of knives: 3, tilting range of fence: 45°, clearance height: 230 mm, feed speed: 6-12 m/min, extraction port: 120 mm, motor power: 4 kW, weight: 460 kg Quality info: - Joint tables adjusted Kdodpsymn Eyjfx Ampjk - Infeed and outfeed rollers checked and adjusted - Table guides checked/adjusted - Complete basic inspection - Complete cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Panel Saw-Spindle Moulder KNAPP KFS Profi T -used- Sliding table saw with format sliding carriage, with outrigger table, tilt-adjustable circular saw, mitre and angle fence, tilt-adjustable spindle moulder, moulder spindle with reversible rotation (clockwise/counterclockwise), fine-adjustable moulder fence ----- Technical Data ----- Cutting length (sliding table): 2,000 mm Cutting height: 103 mm Cutting width: 700 mm Max. saw blade Ø: 315 mm Saw blade tilt range: 45° Spindle moulder diameter: 30 mm Spindle tilt range: 45° Spindle speeds: 2,850 / 4,000 / 7,800 rpm Saw extraction port: 120 + 40 mm Spindle extraction port: 120 mm Dimensions (LxWxH): 2,010 x 1,230 x 83 mm Weight: 590 kg Quality info: - All settings checked - Adjusted according to manufacturer specifications Kdodpoyyzqdofx Ampok - Complete basic inspection - Thorough basic cleaning - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked Kodjyyzp Hjpfx Ampodk - Immediately operational

Condition: used, Year of construction: 1997, machine/vehicle number: IntNr230982, used CNC long lathe Citizen L520, year of manufacture 1997 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Kodpfoy Agrrex Ampsdk Bar diameter max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Loading magazine FMB Turbo 3-26 Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information and prior sale! CNC sliding headstock lathe Citizen L520, year 1997 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazines Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as before sale!

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Ksdpfoy Edfbjx Ampsdk Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, Year of construction: 2005, operating hours: 140,000 h, functionality: limited functionality, Name: Used CHP Unit Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Empty weight: 2200 kg Kodpfjwyax Tex Ampedk Technical doc.: Yes Message: The Engine was changad in 2013 Condition: Used Price: On demand

Condition: used, Year of construction: 2005, operating hours: 140,000 h, Name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Kdsdpfowyaxgjx Ampek Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56kW Dimensions: L 3.600 x W 950 x H 1.750 mm Empty weight: 2.200 kg Technical doc.: Yes Message: The engine was changed in 2013 Condition: Second hand Price: On demand

Condition: used, Used BCD Engineering Ltd stainless steel vertical reactor body. Approximately 4,000 litre nominal capacity. Unit measures approximately 1,800mm diameter x 1,700mm straight side. Has welded dished top and bottom heads. Internal rated 10 bar / full vacuum design pressure at -29 to 200 deg.c. External stainless steel coil jacket rated approximately 324 litre capacity, 6 bar / FV design pressure at -29 to 200 deg.C. Unit includes top mounted stainless steel anchor type agitator but no drive/gearbox currently fitted. Unit mounted on side support lugs. Kdedpfsykn Ipex Ampok

Condition: used, Year of construction: 2017, operating hours: 19,500 h, machine/vehicle number: LC621, Used tetra Pack A3 speed 200 ml Prisma line for UHTTechnical Specifications & Performance DataThis used bottling line is a complete Tetra Pak A3/Speed V040 filling solution configured for 200 ml Prisma cartons. It is a second hand, industrial packaging line designed for high-quality beverage production with integrated downstream packing and date coding. The package also includes a comprehensive UHT processing block to support aseptic filling operations.Main filler: Tetra Pak A3/Speed V040 (carton filling technology)Primary format: 200 ml Prisma cartonsSpeed: 24.000 BPH ( 200 ml Prisma).Accumulator: Tetra HELIX ACHX30-0700-100MLine control: Tetra Pak Line Controller 30 PLUSStraw application: Tetra Pak Straw ApplicatorConveyors: Complete Tetra Pak conveyor systemPacking – wrap around: GAMPACK WB90HSPacking – case/carton: GAMPACK case packerDate coding: Domino date printerWorking hours: 19,500 (line)Included UHT process equipment:Tetra Pak Homogenizer 400Cooling tank 2,000 LTetra Pak Aseptic Tank 30,720 L with Tetra AlsafeComplete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers)Tetra Pak CIP satelliteAdvanced Automation & Control SystemsThe line is coordinated via the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling through secondary packaging. Integrated automation supports stable product flow using the Tetra HELIX accumulator, while the Domino printer provides in-line date coding. System-wide interlocks and operator control points contribute to efficient, repeatable changeovers and robust process control suitable for aseptic beverage packaging.Production Line Integration CapabilitiesEngineered for cohesive end-to-end operation, the line links the Tetra Pak A3/Speed V040 filler with straw application, conveyors, accumulation, and both wrap around and case packing. The configuration facilitates smooth transitions between unit operations for stable throughput. It is purpose-built for 200 ml Prisma cartons and integrates easily into existing industrial packaging layouts for beverage production, whether as a standalone carton line or connected to upstream processing utilities.Machine Condition & Maintenance HistoryThis second hand Tetra Pak A3/Speed V040 carton filling line shows 19,500 operating hours. Presented as a complete used bottling line package with downstream packing and UHT processing equipment, it is suitable for facilities seeking proven, production-ready carton packaging machinery.Operational Performance & VersatilityDesigned for aseptic carton packaging, the system supports UHT-treated beverages, leveraging the VTIS UHT unit, homogenization, aseptic storage, and CIP for hygienic integrity. The straw applicator complements the 200 ml Prisma format for on-the-go consumption. Downstream GAMPACK wrap around and case packing provides flexible secondary packaging options, and the Domino date printer ensures... Kodpjy Egm Iefx Ampedk

Condition: used, Year of construction: 2017, machine/vehicle number: LC611, Used Tetra pak UHT system 5000 LPHTechnical Specifications & Performance DataThis Tetra Pak UHT System Steritherm (model VTIS C-4) is a robust, second hand processing unit designed to deliver consistent ultra-high temperature treatment for beverage production and industrial packaging workflows. Engineered for high reliability and easy integration with downstream filling and bottling equipment, it provides stable thermal performance and hygienic operation for modern beverage production lines.Manufacturer: Tetra PakModel: VTIS C-4 SterithermManufacturing year: 2017Capacity: 5000 L/hMax process temperature (indicative): up to 148 °C (per inspected pressure section)Included equipment: Alfa Laval SHL-20 homogenizer (250 bar), Alfa Laval H7-RC plate heat exchanger (198 L), pump station with Alfa Laval LKH-10 and LKH-107, ABB drive, and CIP regulatorDesign intent: Continuous UHT treatment with integrated homogenization and plate heat exchangeConstruction: Hygienic stainless steel process componentsAdvanced Automation & Control SystemsThe system includes a computer control system for precise process management, delivering stable time–temperature profiles and consistent product quality. Automated supervision of key parameters helps reduce product losses and optimizes energy usage. Interlocks and instrumentation support safe operation throughout heating, holding, and cooling stages.Centralized computer control for process sequencing and alarmsIntegrated CIP regulator to streamline cleaning proceduresProcess instrumentation for pressure, temperature, and flow controlComponent-level CE marking on included Alfa Laval equipmentProduction Line Integration CapabilitiesDesigned to fit seamlessly into a used bottling line or new production layouts, this UHT system interfaces smoothly with upstream raw product handling and downstream filling and packaging machinery. It supports industrial packaging workflows for PET and Glass bottling operations by supplying thermally treated product to fillers.Inline compatibility with fillers, buffer tanks, and conveyorsIdeal for beverage production environments needing continuous 5000 L/h throughputFlexible process connections for integration with existing piping and CIP loopsSuitable for second hand upgrades or capacity expansionsMachine Condition & Maintenance HistoryThis unit is presented as a ready-to-run, second hand UHT system. Ancillary components show evidence of professional upkeep, including a recent service marking on the Alfa Laval pump (dated 04/24) and inspection records on pressure-rated parts.Operational status: ready for operationInspection labeling present on pressure sectionsService marking observed on included pump componentOperational Performance & VersatilityEngineered for consistent UHT processing, the line’s Steritherm design supports stable thermal treatment, homogenization for product consistency, and effici... Kjdpfxey Ef T Ts Ampsdk

Condition: used, Year of construction: 2014, machine/vehicle number: CA79, Used R&G 12 capsuling machine - 12000 BPHTechnical Specifications & Performance DataThis single-station R&G capsuling machine model Z 12 is engineered for high-speed capsule application in professional wine bottling environments. It combines PVC capsule heat-shrinking with sparkling wine hood folding/smoothing in an interchangeable turret configuration, delivering reliable performance for industrial packaging and beverage production.Production speed: up to 16,000 bph with PVC heat-shrinking; up to 12,000 bph for champagne/sparkling hood smoothingApplication technologies: PVC shrink capsules and sparkling wine capsule folding/smoothingNo. of heads: 12 heat-shrinking heads interchangeable with 12 pneumo-mechanical folding/smoothing headsRotation/infeed direction: left-to-right, clockwiseCapsule magazine capacity: approximately 10,000 piecesBottle handling: designed for glass bottles and standard wine bottling formatsYear of manufacture: 2014Machine type: Single-station capsuling machineModel code: Z 12Advanced Automation & Control SystemsThe Z 12 integrates recipe-driven automation to simplify changeovers and ensure repeatable quality. Automated motions and intelligent sensors support consistent capsule application while reducing operator intervention.Automatic machine height adjustment via recipeUniversal feed screw with automatic adjustment from stored recipesCap/cage detector for no-capsule conditionCapsule presence detector with automatic machine stopInterchangeable turret tooling for rapid switch between PVC shrink and sparkling smoothing operationsProduction Line Integration CapabilitiesBuilt to integrate seamlessly into a used bottling line or as a standalone workstation, this capsuling machine supports efficient material flow and quick adaptation to upstream/downstream equipment in beverage production.Universal infeed/outfeed star-wheels for smooth transferCompatible with standard wine glass bottle geometriesIdeal for integration with corkers, wirehooding units, labelers, and conveyorsRecipe-based adjustments reduce format changeover timeMachine Condition & Maintenance HistoryThis second hand capsuling machine is presented in operational condition and suitable for immediate integration following standard commissioning. Its automated recipe controls and robust turret design support consistent performance in continuous operation.Operational Performance & VersatilityThe Z 12 is designed for wineries and beverage producers seeking dependable capsuling with minimal downtime. Its dual-function turret allows switching between PVC capsule heat-shrinking and sparkling hood folding/smoothing without compromising speed or consistency. Intelligent detection systems safeguard product quality by verifying cap presence and stopping the machine automatically when needed.High-speed PVC shrink capsule application for still winePneum... Kdjdpsy Ef T Hjfx Ampjk

Condition: used, Year of construction: 2016, machine/vehicle number: GA22, Used R&B RECORD 12 wierhooder 12000 BPHTechnical Specifications & Performance DataThe Wirehooder RECORD 12 with double distributor is a high-efficiency machine engineered for securing wire cages on sparkling wine and similar glass bottles in industrial packaging environments. Designed for continuous operation in a used bottling line or as a standalone station, it delivers reliable, second hand performance for beverage production where consistency and throughput are essential.Model: RECORD 12Maximum speed: 12,000 bphRotation direction: Clockwise, left to rightYear of manufacture: 2016Double distributor: Supports 2-leg and 4-leg wire cagesDual magazines: Approx. 6,000 cages eachContainer handling: Designed for Glass bottle handlingAdvanced Automation & Control SystemsEngineered to reduce changeover time and operator intervention, this wirehooder integrates recipe-driven automation and precise handling features. Automated setup routines ensure consistent application quality while maintaining high throughput.Recipe-based automatic height adjustment: Quick format alignment via stored recipesUniversal infeed screw: Automatic setup with recipe for smooth bottle infeedSensors and interlocks: Cap detection (no cage application if no cap) and cage presence detection with machine stopProduction Line Integration CapabilitiesThe RECORD 12 integrates seamlessly into complete bottling and packaging lines for sparkling products. It can operate inline with upstream capping and downstream labeling or inspection systems, supporting a wide range of bottle diameters and heights typically used in sparkling wine packaging.Inline or standalone operation modesCompatible with upstream corking/capping stations and downstream labeling/inspectionEfficient material flow with left-to-right (clockwise) layoutMulti-format flexibility via recipe-based adjustmentsMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in ready-for-operation condition, reflecting robust build quality and dependable performance for industrial packaging uses. It is suitable for rapid recommissioning within a used bottling line.Operational status: Ready for operationCommercially maintained features with functional automation and detection systemsOperational Performance & VersatilityOptimized for sparkling closures, the double distributor manages both 2-leg and 4-leg cages to cover diverse product SKUs. The dual high-capacity magazines sustain longer runs with fewer refills, supporting continuous beverage production.Wire cage formats: 2-leg and 4-legHigh-capacity dual magazines: Approx. 6,000 cages each for extended autonomyConsistent application quality at high speeds up to 12,000 bphIdeal for integration in sparkling wine bottling lines within industrial packaging operationsInstallation Requirements & Site P... Kjdpfx Amjy Ef Tyopodk

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Kdjdpfx Amey Ef Ttspsk

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. The Scaligera K325 conveyor (approx. 7.5 m) provides stable product handling, while the TVP3SE... Kdsdpfxoy Ef Tmo Ampek

Condition: used, Year of construction: 2012, machine/vehicle number: PST30, Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: IncludedCE conformity: CE 0409Test pressure date: 2012-11-28Advanced Automation & Control SystemsDesigned for modern beverage production, this aseptic pasteurizer supports automated temperature control and stable holding conditions suited to HTST workflows. It is compatible with typical PLC/HMI architectures used in bottling equipment and packaging machinery, enabling recipe management, alarm handling, and trending through standard plant control systems. Safety interlocks and CE-compliant protections contribute to consistent operation and operator safety during process and cleaning phases.Production Line Integration CapabilitiesBuilt for inline placement within a beverage production or used bottling line, the unit integrates upstream with preparation and deaeration modules and downstream with sterile tanks, fillers, or homogenizers typical of industrial packaging. Format agility at the process level makes it suitable for multiple juice recipes and still beverage SKUs, helping plants adapt to seasonal or private-label demands without extensive hardware changes.Machine Condition & Maintenance HistoryThis is a second hand aseptic pasteurizer previously used for tomato juice and still (non-carbonated) drinks. It is presented as operationally ready for deployment, offering a practical choice for producers seeking proven equipment with established performance characteristics in beverage processing environments.Operational Performance & VersatilityThe system’s aseptic flash process, 125 °C temperature rating, and integrated deaeration help protect color, aroma, and nutritional attributes while reducing dissolved oxygen for improved shelf life. Its capacity range—currently set around 6,000 L/h with headroom to 12,000 L/h—supports both pilot-scale and medium-scale beverage production. This configuration is well suited to juice applications and other still beverages requiring controlled thermal treatment.Installation Requirements & Site PreparationThe pasteurizer is typically skid-mounted for straight... Kdodpfx Aey Ef Siempok

Condition: used, Year of construction: 2004, machine/vehicle number: LC619, Used Tetra Pak TBA-8 SQ 1000 ml filling machineTechnical Specifications & Performance DataThis complete aseptic carton packaging line centers on a Tetra Pak TBA/8-1000 SQ, delivering reliable performance for high-quality beverage production and industrial packaging applications. Engineered for 1.0L carton formats, the line integrates filling, capping, conveying, case packing, and shrink-wrapping functions to provide a cohesive used bottling line solution for second hand operations seeking dependable uptime and consistent output.Primary filler: Tetra Pak TBA/8-1000 SQ (aseptic)Production speed: up to 5,000 packages per hourContainer type: Carton (Tetra Pak style)Format compatibility: 1.0L cartonsCapping unit: Tetra Cap Applicator 88 (for Stream Cap closures)Secondary packaging: Tetra Cardboard Packer TCBP-70Shrink tunnel: Tetra Thermo Shrink Tunnel TTST-51Conveying: Accumulation conveyor system with Dicolube TP lubricationManufactured by: Tetra Pak engineeringLine application: Beverage production and industrial packagingAdvanced Automation & Control SystemsThe line integrates Tetra Pak automation across its modules for coordinated operation and optimized throughput. The TBA/8-1000 SQ aseptic unit ensures controlled filling conditions, while the cap applicator, conveyors, and end-of-line equipment synchronize for smooth handling and minimal bottlenecks. Safety interlocks and CE-marked protections support secure operation. Quick adjustments on the capper and packer facilitate efficient format handling within the 1.0L range.Centralized module controls for synchronized line operationAutomated cap application for Stream Cap closuresCE-compliant safety architecture across major modulesLubrication-assisted conveyor operation with Dicolube TPProduction Line Integration CapabilitiesDesigned as a cohesive packaging machinery set, this second hand line offers plug-and-produce integration across filling, capping, conveying, packing, and shrink-wrapping. The accumulation conveyor system stabilizes product flow between units, protecting upstream aseptic operations and downstream secondary packaging. The configuration is ideal for producers standardizing on 1.0L cartons.Inline configuration from aseptic filling to end-of-line wrappingConveyor accumulation for balanced flow and reduced stoppagesSuitable for beverage production requiring aseptic carton packagingOptimized for 1.0L cartons; straightforward adjustments within this formatMachine Condition & Maintenance HistoryThe equipment is presented in excellent working order and ready for immediate use, representing a dependable used bottling line for rapid deployment. Component-level details include:TBA/8-1000 SQ: 3,862 operating hours; excellent, ready for immediate useTetra Cap Applicator 88: 7,709 operating hours; working condition for Stream Cap closuresTTST-51 shrink tunnel: re... Kodpfjy Ef Scjx Ampedk

Condition: used, Year of construction: 2021, operating hours: 274 h, machine/vehicle number: LC620, Used Terta Pak A3Flex 600V 500SlimTechnical Specifications & Performance DataThis second hand aseptic carton filling machine is manufactured by Tetra Pak and configured for the 500 Slim package format. Designed for industrial packaging and beverage production, it delivers reliable aseptic performance for long-life products. With very low operating hours and recent manufacture, it represents a high-value option for facilities seeking a modern, used bottling line component to expand capacity or replace older equipment.Manufacturer: Tetra PakModel: A3/FlexConfiguration: TBA 500 Slim formatYear of manufacture: 2021Operating hours: 274 hSpeed: 8.000 BPH PLC: AB Drawing specification code: 648575-0600Container type: Carton (Tetra Pak Slim)Bottle/package formats: Compatible with 0.5L formatProduction speed: Format- and product-dependentMarkings: CE, EACAdvanced Automation & Control SystemsThe A3/Flex platform is engineered for high automation with an operator-friendly HMI that supports recipe management and production counters for efficient line monitoring. The control system enables precise aseptic process control, accurate filling, and consistent packaging quality. Quick format setup within the configured range streamlines changeovers, while integrated diagnostics and alarms support fast troubleshooting and high uptime in continuous operation.Operator HMI with production counters and status visualizationAutomated aseptic sequences with controlled sterilization and fillingIntegrated diagnostics and alarm managementDesigned for rapid cleaning and sanitization proceduresProduction Line Integration CapabilitiesThis machine integrates seamlessly into a complete packaging line, upstream and downstream, supporting conveyors, packers, and palletizing systems. It is suitable for standalone operation in a dedicated cell or as part of a fully synchronized industrial packaging layout. The A3/Flex is well known for stable performance in multi-shift beverage production environments.Inline integration with upstream carton preparation and downstream secondary packagingSuitable for beverage production requiring aseptic carton fillingOptimized for 0.5L carton handlingCan be synchronized with conveyors, case packers, and palletizersMachine Condition & Maintenance HistoryManufactured in 2021 and showing only 274 operating hours, this unit presents minimal wear and contemporary design features. It is offered as a second hand asset in working condition and ready for operation, ideal for facilities seeking a recent-generation aseptic filler without a long lead time.Used machine with very low hoursReady for operationModern generation A3/Flex platformOperational Performance & VersatilityEngineered for aseptic packaging, the A3/Flex provides precise fi... Kodoy Ef R Ejpfx Ampedk

Condition: used, Year of construction: 2008, machine/vehicle number: M322, Used master can filling monoblock 23000 CPH Pre-owned isobaric monoblock filling machine for a Second-Hand Can Filling Line Technical Specifications & Performance Data Monoblock filler specs and performance for high-speed CSD production This is an isobaric can filling and seaming group engineered for carbonated soft drinks, combining high-speed output with reliable carbonation control. Manufactured by TECNOFOOD GROUP, the system consists of a 50-valve filler synchronized with a 6-head seamer, offering efficient performance for beverage production and industrial packaging environments. This configuration makes it a strong choice for integration into a used bottling line or second-hand packaging machinery setup. Kdodsy Efx Nopfx Ampsk Model: Master CanSeries: 50Filling technology: Isobaric for carbonated beveragesNumber of valves: 50Seaming heads: 6Carousel diameter: 1800Pitch: 113Rotation: CounterclockwiseBase format speed: 23,000 cans/hour at 0.5LOther format speed: 28,000 cans/hour at 0.33L Filling temperature: 18 °CCO2 content: up to 8 (as specified)Installed power: 20 kWElectrical supply: 380 V, 50 Hz; auxiliary 24 VEnclosure protection: IP55 external, IP20 internalInert gas pressure: 6–8 barCompressed air pressure: 6–8 barProcess water pressure: 3–4 barYear of manufacture: 2008Container types: Aluminum cansFormats: 0.33L, 0.5L This pre-owned isobaric monoblock filling machine aligns with search intents for monoblock filler and monoblock filling machines, making it highly relevant for buyers building or upgrading a second-hand can filling line and evaluating alternatives to brands such as Cime Careddu. Advanced Automation & Control Systems The machine features an industrial electrical architecture optimized for beverage production lines: 380 V, 50 Hz power supply and a 24 V auxiliary circuit to support control and safety devices. The control cabinet carries IP55 external and IP20 internal protection ratings for robust operation in washdown-adjacent bottling environments. Isobaric filling ensures accurate product dosing, while the integrated 6-head seamer provides precise and hermetic lid application, maintaining carbonation retention for soft drinks. As a compact monoblock filler, this unit centralizes filling and seaming for efficiency, safety, and quality. Buyers comparing pre-owned solutions to well-known options such as Cime Careddu monoblock filling machines will appreciate the reliability and control standards present here. Production Line Integration Capabilities Designed for integration into a complete beverage production line, this can filler and seamer interface smoothly with upstream depalletizing and rinsing, and downs...

Condition: used, Used approximately 400 litre capacity (product dependent) stainless steel twin paddle mixer. Mixing chamber measures approximately 1,300mm long x 850mm wide x 650mm deep. Stainless steel paddles driven by electric motor/gearbox. Unit includes hydraulic powerpack for tilt discharge. Has local operator controls. Kdodpfx Aeyi Evbompjk

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Kedou R S Nwepfx Ampsdk Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2014, machine/vehicle number: CA76, Technical Specifications & Performance DataThe Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brand’s engineering for consistent, repeatable results in capsule application.Manufacturer: Robino & GalandrinoModel: Fenix 2Year: 2014Speed: 5000 BPH ( bottles per hour) Machine category: Capsuling machineSchema/code: FEX750Electrical supply: 400 V, 3-phaseFrequency: 50 HzNominal current: 6.5 ATypical application: Capsule application on bottles in beverage production linesAdvanced Automation & Control SystemsThe Fenix 2 supports straightforward integration with modern line controls. Its 400 V 3-phase, 50 Hz electrical configuration is standard across European bottling equipment, simplifying installation alongside PLC/HMI-managed production lines. Designed for repeatability and operator efficiency, the machine supports clear operational states, standard interlocks, and controlled application parameters that help maintain consistent capsule quality.Production Line Integration CapabilitiesThis capsuling machine is intended for inline operation as part of an industrial packaging system. It interfaces effectively with upstream and downstream modules such as corking/capping stations, labeling machines, and conveyors. The machine’s robust frame and standardized electrical architecture allow integration into a used bottling line or a mixed-manufacturer production line for beverages. It is suitable for configurations handling glass bottles commonly found in wine and premium beverage packaging.Machine Condition & Maintenance HistoryAs a second hand, 2014-manufactured unit, the Fenix 2 offers a solid balance between modern engineering and proven field reliability. It suits facilities seeking dependable capsuling performance within an established beverage production process or upgrading an existing used bottling line. Maintenance routines typically include capsule feed verification, head alignment checks, and inspection of wear parts to preserve application accuracy and throughput.Operational Performance & VersatilityThe Fenix series is recognized for stability in capsule application on bottles used in wine and premium beverage packaging. It is designed for precise placement and consistent shrink/application characteristics, supporting high-quality presentation standards demanded by beverage production. The machine is compatible with standard conveyor handling solutions for glass containers and is adaptable to different line layouts and speeds determined by upstream/downstream equipment.Installation Requirements & Site PreparationInstallation requires a stable production floor, 400 V 3-phase 50 Hz electrical service, and alignment with existing conveyor and line control systems. ... Kdsdpjyhbi Iofx Ampsk

Condition: used, Year of construction: 2012, operating hours: 10,000 h, machine/vehicle number: TP109, Used Capping Machine AVE 6T up to 7000 bph The used capping machine AVE 6T up to 7000 bph delivers high efficiency and versatility for the bottling industry. Specifically, it handles medium to high-speed production lines, ensuring consistent and reliable results. Furthermore, the machine for Stelvin Lux uses six capping heads to provide precise and uniform operation throughout every bottling cycle. Moreover, its design maximizes production speed, enabling the handling of up to 7000 bottles per hour. This performance, in turn, supports businesses aiming to improve operational efficiency and maintain consistent product quality. The system supports aluminum screw caps of the Stelvin Lux type, measuring 30×60 mm. Consequently, this cap type creates an airtight seal, preserving product integrity and extending shelf life. Producers in the wine and beverage industry often choose this format for its reliability. Additionally, the machine rotates clockwise, aligning with standard bottling line layouts and reducing the need for costly modifications. Its compact design, moreover, integrates smoothly into existing production environments, even when space is tight.  Safety Features and User-Friendly Maintenance The used capping machine AVE 6T up to 7000 bp enhances safety by incorporating advanced protective features. For instance, these systems shield operators from potential risks, reducing accidents and improving workplace safety. Furthermore, the safety mechanisms allow operators to access and maintain them quickly, ensuring consistent compliance with industry standards. The technical manuals of Stelvin Lux, in addition, offer clear instructions for installation, maintenance, and troubleshooting. These guides, therefore, enable operators to resolve issues efficiently, minimizing downtime and preserving productivity. Additionally, the machine’s modular design allows technicians to replace components quickly, streamlining maintenance tasks and lowering repair costs. Current State and Electrical Requirements The machine for Stelvin Lux currently remains in storage, ready for immediate installation on a new production line. Moreover, it operates at 400 V, with a power requirement of 3 kW and a frequency of 5 Hz. Therefore, users should verify these specifications to confirm compatibility with their existing electrical systems. Furthermore, the machine’s low energy consumption supports production facilities in reducing operational costs without compromising performance. Robust Performance and Durability of Stelvin Lux Thi machine withstands demanding production environments with its durable construction. Notably, its six capping heads ensure consistent quality in every operation, maintaining high production standards. Consequently, businesses rely on this machine to meet ambitious production goals while preserving the integrity of their products. Moreover, its precision and efficiency make it a valuable asset for any bottling operation. Conclusion of teh Used Capping Machine AVE 6T up to 7000 bph Kjdpfx Aovgvabjmpsdk The used capping machine AVE 6T up to 7000 bph offers an effective and reliable solution for bottling operations. In particular, it boosts efficiency by combining precise capping heads, strong safety features, and simple maintenance requirements. Additionally, its seamless compatibility with standard production lines and energy-efficient operation provide ...

Condition: excellent (used), AREVA 400 kVA electrical transformer station with main low-voltage switchboard (TGBT) Year 2006 Kdodpjyr Aflefx Ampek