Used Transformator for sale (743)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, turning length: 145 mm, turning diameter: 168 mm, travel distance X-axis: 130 mm, travel distance Y-axis: 110 mm, controller model: FANUC 31i-TA, TECHNICAL DETAILS Turning diameter: 168 mm Turning length: 145 mm X-axis travel: 130 mm Z-axis travel: 110 mm Spindle speed: 45–6,000 rpm MACHINE DETAILS Control system: FANUC 31i-TA EQUIPMENT 2 × Portal clamping system 2 × Part chute for inspected parts 2 × 3-jaw chuck, SMW Autoblok, Type BHM 165, 152.4 mm (6 inches) SMW Autoblok hydraulic cylinder, Type SIN-S 100, left SMW Autoblok hydraulic cylinder, Type VNK 70/37, right Rsdpszul Ruofx Adzjcf Chip conveyor, discharging to the rear of the machine Air-controlled part clamping monitoring, right Part clamping monitoring, on both sides 4-position spindle orientation, on both sides Coolant injection in the chuck via Deublin rotary distributor, on both sides Automatic coolant pump with 200 l tank capacity 2 × 8-station turret Signal light with traffic light design Preparation for oil mist extraction Automatic machine shutdown Automatic central lubrication RS-232-C interface External transformer 10 × Boring bar holders 3 × Turning tool holders, right 3 × Turning tool holders, left Customer macro B Turning cycles

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Rsdszul T Njpfx Adzscf Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Rcodpjzul Utsfx Adzef Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Dimensions & Weight Rcsdpfx Aozul Tvedzsf Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: excellent (used), For sale: ABB dry-type transformer. Type: DTE 100 / 1.1 3-phase dry-type transformer, 50 Hz Year: 2003 Rjdpfxox Tzcye Adzjcf Power: 100 kVA Connection: Dyn5 Voltage drop: 5.82% Weight: 745 kg Voltage: 400 V Condition: very good

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 786630-01, type of input current: three-phase, overall weight: 4,020 kg, input frequency: 50 Hz, Equipment: documentation/manual, For a high level of safety and exceptional environmental friendliness, there’s nothing to beat a dry-type cast resin transformer. Rsdpfoxywk Djx Adzocf The epoxy resin insulation used in this kind of transformer means no oil is used, greatly reducing the risk of fire and improving recyclability, all without loss of performance compared to other transformer types. Dry-type cast resin transformers are therefore ideal for critical applications and high-traffic areas. Even among dry-type cast resin transformers, Trihal from Schneider Electric stands out due to its outstanding performance and unrivalled certifications.

Condition: used, Year of construction: 1966, Used SCHORCH oil-filled transformer with a rated power of 1,600 kVA. Manufacturer: SCHORCH / Continental Elektroindustrie AG Type: DG 1600/10 Rjdpfxszw T Erj Adzecf Year of manufacture: 1966 Rated power: 1,600 kVA Voltage: 5,000 / 400 V Tap changer positions: 5,200 / 5,000 / 4,800 V Frequency: 50 Hz Connection type: Dy5 Rated current: 185 / 2,310 A Total weight: approx. 5.22 t Oil weight: approx. 1.34 t

Condition: used, Year of construction: 1982, Used Trafo-Union power transformer with a rated power of 10,000/12,500 kVA and ONAN/ONAF cooling. Manufacturer: Trafo-Union Type: TLUN 7146 Year of manufacture: 1982 Rated power: 10,000 / 12,500 kVA Voltage: 30 / 5.25 kV On-load tap changer (OLTC) settings: 31.5 / 30 / 28.5 kV Frequency: 50 Hz Vector group: Yd5 Cooling: ONAN / ONAF Total weight: 16.8 t Rodpfxezw T Exj Adzecf Oil weight: 3.4 t

Condition: used, Year of construction: 1977, Used MARX oil transformer with a rated power of 1,000 kVA. Manufacturer: MARX, Iserlohn Type: T3DU6 Year of manufacture: 1977 Rated power: 1,000 kVA Voltage: 5,000 / 400 V Tap changer positions OS: 5,250 / 5,000 / 4,750 V Redpfezw T Elox Adzecf Frequency: 50 Hz Vector group: Dyn5 Rated current: 115.47 / 1,443.4 A Total weight: 2,840 kg Oil weight: 730 kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 18,000 kg, input voltage: 20,000 V, input frequency: 50 Hz, total height: 4,850 mm, total width: 3,400 mm, total length: 3,600 mm, nominal power (apparent): 11,500 kVA, secondary voltage: 690 V, protection type (IP code): IP23, temperature: 40 °C, Equipment: type plate available, Hitachi Energy RESIBLOC® Cast Resin Transformer – 11.5 MVA – New & Unused For sale is a high-quality Hitachi Energy RESIBLOC® cast resin transformer, which was procured for a project but never put into operation. Since delivery, the transformer has been stored exclusively under professional conditions and is therefore factory-new and unused. The transformer is ideally suited for applications in power supply, battery storage projects (BESS), industrial plants, data centers, and other energy-intensive infrastructure projects. Technical data * Manufacturer: Hitachi Energy Germany AG * Type: RESIBLOC® Cast Resin Transformer * Condition: New, unused, never in operation * Rated power: 11,500 kVA (11.5 MVA) * Primary voltage: 20 kV (switchable to 10 kV) * Secondary voltage: 690 V * Frequency: 50 Hz * Connection group: Dyn5 * Protection class: IP23 * Cooling: AN (natural air cooling) Rsdezkmtpepfx Adzjcf * Design for outdoor installation * Including busbar system * Total weight: approx. 18,000 kg * Dimensions (L × W × H): 3,600 × 3,400 × 4,850 mm Condition * Factory-new * Never electrically connected * Never put into operation * Stored exclusively * Technical documentation available Inspection possible by arrangement. Assistance with loading and transport can be organized if required.

Condition: like new (used), Year of construction: 2025, functionality: unexamined, machine/vehicle number: 2 x 1000 kVA und 1 x 1600 kVA, Please provide us with your offer price. Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Redpjzkh Nxjfx Adzecf Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, overall weight: 2,900 kg, input frequency: 50 Hz, nominal power: 1,250 kW (1,699.52 HP), One used oil transformer, TRANSFIX brand, with aluminum windings and ONAN cooling. 1250 kVA, 20,000 Volt / 20 kV. Manufactured in 1999, in excellent condition. Always available; please contact us for more information. Rsdpfx Aozbyq Rjdzjcf

Condition: used, Used power transformer from LEPPER-DOMINIT with a rated power of 10,000/12,500 kVA. Manufacturer: LEPPER-DOMINIT Type: PDO 12 500/30 Year of manufacture: 1980 Rated power: 10,000 / 12,500 kVA Voltage: 30 / 5.25 kV On-load tap changer settings: 31.5 / 30 / 28.5 kV Frequency: 50 Hz Vector group: Yd5 Cooling: ONAN / ONAF Rcodszw T D Ujpfx Adzsf Total weight: 19 t Oil weight: 4.2 t

Condition: repair required (used), Year of construction: 1993, functionality: limited functionality, machine/vehicle number: 195913-0, overall weight: 1,700 kg, The transformer has a slight oil leak at two fins. Rodpfjztnkbox Adzecf

Condition: used, Year of construction: 2013, type of input current: AC, overall weight: 4,280 kg, input voltage: 21,000 V, input frequency: 50 Hz, nominal power (apparent): 2,100 kVA, protection type (IP code): IP00, type of output current: AC, We offer this used SGB DTTHIL 1600/20 transformer, manufactured in 2013. Rated power: 2100/1900/200 kVA Rated voltage, stage 1: 21000 V Rated voltage, stage 2: 20500 V Rated voltage, stage 3: 20000 V Rated voltage, stage 4: 19500 V Rated voltage, stage 5: 19000 V Insulation level: 24.0/1.1 kV Low-voltage AC level: 125/50 kV Short-circuit voltage: 7.5/0.8 % Maximum short-circuit loss: 2 kW Short-circuit current: 0.73 kA Frequency: 50 Hz Vector group: Dyn5 Cooling type: AF Rcedpfx Ajzwdqfsdzof Protection class: IP00 Weight: 4280 kg Winding material HV/LV: Al/Al iE/iN: 8.6 T₀,₅: 0.25 s Climate class: C2 Fire class: F1 If you have any questions or require further information, please send us a message or call us. 2 additional SGB transformers of the same type from 2002 are available.

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Rodpfx Adsy St Sdjzjcf Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2010, functionality: unexamined, overall weight: 4,640 kg, input voltage: 20,000 V, input frequency: 50 Hz, nominal power (apparent): 2,100 kVA, secondary voltage: 688 V, protection type (IP code): IP00, input current: 60 A, output voltage: 688 V, We are offering this used Siemens 4GB6367-9KA transformer, manufactured in 2001. Type: 4GB6367-1ZY Serial number: K812478 Year of manufacture: 2010 Rated capacity: 2100/1902/205 kVA Rated frequency: 50 Hz Vector group: Dyn6 Rated primary voltage: 20000 V Rated secondary voltage: 688 V Rated primary current: 60.6 A Rated secondary current: 1594 A Rcsdpfx Adszwduqszef Impedance voltage: 8.2% Max. short-circuit duration: 2 s Thermal class HV/LV: F/F Degree of protection: IP00 Cooling method: AF Transformer weight: 4.64 t Insulation level: AC50-L125/AC3 If you have any questions or require further information, please do not hesitate to contact us. 2 additional Siemens transformers from 2001 are available.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: K807637, type of input current: three-phase, overall weight: 8,700 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 4,000 kVA, secondary voltage: 690 V, protection type (IP code): IP00, input current: 231 A, type of output current: three-phase, output voltage: 690 V, Equipment: type plate available, three-phase transformer (dry) from primary 10 kV (± 5%) to secondary 690 V with a capacity of 4000 kVA Rcodpfxjx Swpgj Adzjf

Condition: used, Year of construction: 1991, Two identical HEIM oil-filled transformers with a rated power of 1,000 kVA each are for sale. The technical specifications are documented on the nameplates. The dismantling must be completed no later than August 31, 2026. Manufacturer: Trafo-Fabrik Ludwigshafen/Rhein Heim u. Cie GmbH Type: DO 1000 Year of manufacture: 1991 Rated power: 1,000 kVA Cooling type: ONAN Frequency: 50 Hz Primary rated voltage: 20,000 V Primary tapping: 21,000 V / 20,000 V / 19,000 V Secondary rated voltage: 400 V Primary rated current: 28.87 A Secondary rated current: 1,443 A Switching group: Dyn5 Short-circuit voltage: 5.92 % Total weight: 2,500 kg Oil weight: 540 kg Operating mode: DB Maximum short-circuit duration: 2 s Quantity: 2 Redpfx Aszu Th Uedzjcf Deadline for dismantling: August 31, 2026 Price for both combined.

Condition: good (used), Year of construction: 1988, Three-phase power transformer from ASEA LEPPER with a rated power of 800 kVA for voltage conversion from 20 kV to 400 V. Manufacturer: ASEA LEPPER Type: DFVHK Redjzttf Djpfx Adzecf Year of manufacture: 1988 Rated power: 800 kVA Rated voltage, high voltage: 20,000 V Rated voltage, low voltage: 400 V Rated current, high voltage: 23.1 A Rated current, low voltage: 1,155 A Frequency: 50 Hz Vector group: Dyn 5 Rated short-circuit voltage: 5.7 % Protection class: IP23 Cooling method: AN Insulation class: F Maximum short-circuit duration: 4 s Total weight: 3,450 kg Quantity available: 2 units Price: €7,700 per unit EXW Assistance with delivery and loading can be provided by the seller. No sale for scrap value. Location: Munich

Condition: good (used), Year of construction: 1989, Three-phase power transformer from ASEA LEPPER with a rated power of 630 kVA for voltage conversion from 20 kV to 400 V. Redpfx Adszttfkszecf Manufacturer: ASEA LEPPER Type: DFVHK Year of manufacture: 1989 Rated power: 630 kVA Rated voltage, high voltage: 20,000 V Rated voltage, low voltage: 400 V Rated current, high voltage: 18.2 A Rated current, low voltage: 909 A Frequency: 50 Hz Connection group: Dyn 5 Rated short-circuit voltage: 6.2 % Protection class: IP20 Cooling method: AN Insulation class: F Maximum short-circuit duration: 4 s Total weight: 2,720 kg Number available: 2 units The seller can provide assistance with delivery and loading. No sale at scrap price. Location: Munich

Condition: used, Year of construction: 1997, 2 pcs of furnace oil power transformers with tap changer; manufacturer SGB Germany; 28MVA; 22kV/430-150V; 735-290A at 22kV; 37600-42620A at 430-150V, Dd1, OFWF, functional, design documentation, rutine test reports, year of manufacturer 1997 and 1999 Rsdpezt Nryjfx Adzecf

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, type of input current: AC, overall weight: 9,500 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 2,500 mm, total width: 2,400 mm, total length: 2,700 mm, nominal power (apparent): 630 kVA, nominal power: 400 kW (543.85 HP), Equipment: documentation/manual, type plate available, Compact substation, transformer 630 kVA, input voltage 10 kV, color green, with MV and LV switchgear. Rcjdpfxezfqide Adzof

Condition: used, functionality: fully functional, machine/vehicle number: 191965, used transformer Disassembly/transport to be carried out by the buyer. Rsdozckp Topfx Adzscf

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 399.069.101, type of input current: three-phase, overall weight: 2,800 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 400 V, protection type (IP code): IP55, input current: 44 A, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, Iron case 3-phase transformer (dry) from primary 10 KV (± 5%) to 400V with metal casing with capacity 800 KVA. Redpfx Ajx Sdr Iedzecf