Used Turning Station for sale (11,709)

Condition: used, Year of construction: 2002, Lot consists of: (1) Vertical Turning Machine Technical Details: Equipped with: - CNC control Siemens 840 D - Tool turret with 12 stations VDI 40 - Driven tool positions at stations 1/4/7/10 - Workpiece conveyor belt - Chip conveyor - No coolant pump (central system) - Turning diameter: 200 mm - Swing diameter: 250 mm - Turning height: 350 mm - Control: Siemens Sinumerik 840 D - Spindle front bearing diameter: 100 mm Itedpfxeym Rmmo Aaljd - Feed range: 0.1 - 20,000 mm/min - Rapid traverse: 20 m/min - Stroke of vertical slide: 300 mm - Spindle nose according to DIN 55026 – size A6 - Main spindle speed: 50 - 6,500 rpm - Tool drive speed range: 0 - 3,000 rpm - Total connected load: 40 kW - Machine weight approx. 8 t - Floor space required approx. 4.5 x 4.0 x 3.5 m The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2001, Lot consists of: (1) CNC Lathe Technical Details: X/Z 210/610 mm, 12-position tool turret / all positions driven (4,000 rpm), tailstock, C-axes, spindle speed 3,600 rpm, spindle bore 65 mm, coolant unit with KNOLL chip conveyor, and two drawer cabinets with accessories (no warranty of completeness) Itodpeym Rlvjfx Aaled The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Technical Details: Itodpfx Aaoym Rlcsljd Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Iodpfx Aasvpv Nujlstd

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,752 h, functionality: unexamined, Equipment: documentation/manual, We are offering this ready-to-use GILDEMEISTER CTX 200 series 2 CNC turning and milling center, year of manufacture 2001. Manufacturer: GILDEMEISTER Type/Model: CTX 200 series 2 Contrary to the photo, the machine is sold with a three-jaw chuck and not a collet chuck; various VDI20 toolholders are included as well. The short bar feeder has not been in operation for a long time, so its condition is unknown. Iedpfoyu Uytox Aalotd If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Manufacture : Volkmann Itjdpfxoyk Inve Aalod Model : RNT 180 Type: Station for filling and emptying pouches, bags and other packaging. Connection for pneumatic transfer Fine particle extraction system Aspiration : Multi Ejector + Vacuum pump G1800 Pneumatic filter cleaning system Air tank : FESTO CRVZS-2 (capacité 2 L) / Pression max : 16 bar Level probe Opening sensor Side vibrator 100% pneumatic unit 3 filters supplied with the machine

Condition: good (used), Year of construction: 2003, Main spindle: Speed range - main spindle max. 6,000 min/-1 Drive power - main spindle 16 kW Max. torque 155 Nm C-axis 360 ° Tool turret: Number of tool positions 12 pos. Number of driven tool stations 12 pos. Speed range - driven tools max. 5,000 min -1 Drive power - driven Tools 10 kW Tool holder (VDI 30) Tool shaft 20 x 20 mm Travel paths: x-axis 160 mm z-axis 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Itjdev Drigopfx Aaled Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Total power requirement Machine weight approx. 3.7 t Space requirement approx. 4.5 x 2.5 x 2.5 m Heidenhain control Hollow clamping cylinder C-axis and tool drive a Chip conveyor Oil and emulsion mist separator with electrostatic filter

Condition: used, 1 unit CNC turning and milling center with two spindles and two turrets MAZAK MULTIPLEX 620 MARKII, including tool cabinet and various contents, 1x desk 110x70x87cm, 1x tool cabinet 50x50x110cm, 1x computer, 1x monitor, 1x keyboard, as per images and inspection, self-dismantling. Condition: used. Storage location: production hall / left. Payment method: advance bank transfer. Shipping: Collection only – shipping is not offered for this item! Itedpfsyr Ianjx Aalsd

Condition: used, 1 unit CNC turning center MAZAK SUPER QUICK TURN 15M MARKII. Max. turning diameter approx. 300 mm, max. turning length approx. 528 mm, spindle speed up to 5,000 rpm, 12-station turret. Travel paths: X-axis approx. 180 mm, Z-axis approx. 575 mm. Including tool cabinet and various accessories as per photos and inspection, self-dismantling. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Location of goods: Production hall / left Payment method: Advance payment by bank transfer Shipping: Collection only – No shipping offered for this item! Itsdpfx Aoyr H Tyjalsd

Condition: used, 1 piece 5-axis multifunction turning and milling center MAZAK INTEGREX 200Y with chip conveyor, tool holders, cutting tools, clamping devices, workbench 120x75x85 cm, 2 material cabinets, and various accessories, as per photos and inspection, self-dismantling required. Dimensions (L/W/H): 70x55x105 cm. Condition: used. Storage location: production hall / left. Payment method: advance payment by bank transfer. Shipping: pickup only – no shipping offered for this item! Itodpfx Aaoyr H Tajlod

Condition: used, Year of construction: 1996, 1 pc. CNC turning center MAZAK SUPER QUICK TURN 15M MARKII with tool cabinet and various contents, as per photos and inspection, self-dismantling Year of manufacture: 1996 Dimensions (L/W/H): 70x55x105 cm Condition: used Storage location: Production hall / left Payment method: Advance payment by bank transfer Shipping: Collection only – shipping is not offered for this item! Iodpfx Ajyr H Dljalstd

Condition: used, 1 unit CNC turning center with two spindles and two turrets, MAZAK MULTIPLEX 420, including tool holders, clamping devices and cutting tools, 3x storage racks, 3x tool cabinets, as per images and inspection, self-dismantling required. Color: green. Dimensions L/W/H: 100x40x28 cm. Condition: used. Storage location: production hall / left side. Payment method: advance payment via bank transfer. Shipping: Collection only – no shipping offered for this item! Itsdpfx Aajyr Hzkjlod

Condition: new, Year of construction: 2025, Z-MaT TN500-450 Siemens 828 D ShopTurn, 15" Touch 35° Slant Bed, CNC Turning Center, with Tailstock C-Axis, hydraulic brake with driven tools, Linear roller guides on all axes with linear robot and magazine Max. Swing Diameter: 550 mm Max. Turning Diameter: 360 mm Max. Turning Length: 450 mm Rapid Traverse X/Z: 20/20 m/min Turret: 12 stations, BMT45 of which 12 are driven Max. Turret Speed: 4000 rpm, 3 kW Spindle Chuck Diameter: 254 mm Spindle Nose: A2-8 Max. Bar Capacity: 75 mm Spindle Bore Diameter: 86 mm Drive Power, Direct Drive: 22/30 kW Max. Spindle Speed: 3,000 rpm Tailstock Diameter: 110 mm / MT 5 Tailstock Quill Stroke: 100-500 mm Dimensions (W x D x H): 2.8 x 1.7 x 1.9 m Weight: 4.8 t Standard Equipment Hinged belt chip conveyor Oil skimmer Coolant system Three-color warning light Work area lighting Central lubrication system Programmable tailstock Set of soft jaws Tools and toolbox CE compliance Operating manual Itsdjwwv Tuspfx Aaled Machine with linear loading robot Video shows the linear loading robot with another machine The machine will be exhibited at EMO Hall 12/D10, and is available for immediate delivery afterwards.

Condition: new, Year of construction: 2024, DT500EY-650 Siemens 828 D ShopTurn (Fanuc Option) CNC turning/milling center with tailstock, driven tools and true Y-axis, ±70 mm, 35° slant bed and linear roller guides Available for viewing in the showroom Max. swing diameter: 600 mm Max. turning diameter: 320 mm Max. turning length: 650 mm Rapid traverse X/Z/Y: 20/20/12 m/min Turret: 12 stations BMT55, all 12 with live tooling Max. rotational speed: 4000 rpm, 3 kW Spindle Chuck diameter: 203 mm (optional 254 mm) Spindle nose: A2-6 (optional A2-8) Max. bar capacity: 52 mm (options for 65, 75, and 91 mm) Iedjqa Dtfopfx Aaljtd Spindle bore diameter: 66 mm Drive power, direct drive: 22/30 kW Max. spindle speed: 4,000 rpm Tailstock diameter: 110 mm / MK3 Tailstock traverse: 850 mm Dimensions (W x D x H): 3.6 x 2.1 x 2.3 m Weight: 5.5 t Standard accessories: Coolant system Three-color warning light Work area lighting Central lubrication Programmable tailstock Set of soft jaws Tools and toolbox CE conformity Operating manual Including special accessories: Hinged belt chip conveyor Tool measuring arm Oil skimmer Bar loader interface Video shows DT500

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm Itsdpfxslzm Eqe Aaled turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: good (used), Year of construction: 2012, Ref. -No.: 10637 Manufacturer: DOOSAN PUMA Type: 480XLM Year of construction: 2012 Type of control: CNC Control: FANUC 32iA Storage location: Halberstadt Country of origin: Korea Bar passage: 165 mm Turning Length: 992 mm Spindle Bore: 181 mm Max. Turning diameter: 900 mm Max. machining diameter: 650 mm Spindle motor drive: 45 kW Turret places: 10 Pcs Machine length: 7000 mm Machine width: 2310 mm Machine Height: 2440 mm Weight Of The Machine Ca.: 12800 t Swivel range: 900 mm spindle: 1500 RPM Turning Speeds: 1500 RPM Further information: - 3-jaw power chuck - Programmable tailstock - Chip conveyor - Cooling - SMW SLU5 hydraulic steady rest Itsdpfx Aeyr H I Roaled The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, Many tools included : Automatic cutting fluid filtration system chip conveyor belt Isdeycwbpepfx Aaljtd coin return system high-pressure sprinkler system

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC control M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Ijdpfxsyml Dme Aaljtd Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: used, Year of construction: 2007, turning diameter 1400 mm swing diameter 1600 mm turning height 500 mm Workpiece length - Bore grinding 300 mm Workpiece length - Turning 500 mm control Siemens Sinumerik 840 D work piece spindle speed range 0-400 U/min boring diameter 100 - 500 mm total power requirement ca. 185 kW weight of the machine ca. 35 t With grinding spindle Table strokes: - Z1/Z2 axis 1000 mm - X1/X2 axis approx. 1400 mm Table speed infinitely variable: - Z 0 to 30 m/min - X 0 to 60 m/min - Workpiece spindle flange diameter 520 mm - Infeed speed 0.01 - 15 mm/min Equipment/ Accessories - Grinding spindle - Kaiser dresser - Tool measuring probe Itodpfxow Rf Slo Aalsd - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - documentation

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm Itjdjx Irzvspfx Aalsd 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Ijdeytx Urspfx Aalstd Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, Ruchser standard offer with layout for a timber window production line featuring profiled glazing beads and screwed corner joints. Daily capacity approx. 30 windows The production line consists of: Pos. 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 profile trolley, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cuttings. 12 pairs of storage arms welded to each column, 2 central columns adjustable, clear spacing between storage arms 130 mm, depth of storage arms on each side 400 mm, arms covered with felt, with 4 plastic castors, diameter 150 mm, 2 of which have locking devices. Pos. 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame fitting components, 3000 mm long, width 600 mm. 1 shelf for hardware parts, 1 support table covered with felt, working height adjustable between 900 – 1100 mm (without screwing units). Pos. 2.1 – Article 6747 1 piece running rail with carriage, 3000 mm long. Pos. 2.2 – Article 6308 Itjdpfx Aasytx Uljljd 1 piece balancer for equipment 3 to 5.5 kg. Pos. 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose connections. Inline screwdriver ADS 2445 RD with torque shutoff. Set up for the screw feeding used by the customer. Suitable for the following screw dimensions: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm When ordering, information about the screw must be provided to the manufacturer at the factory. Pos. 3.0 – Article 10782000 1 piece RU-EW-2S storage trolley, double-sided, max. storage capacity 36 sash frames screwed in an L-shape, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 castors, 2 of which have stoppers. Pos. 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with mobility unit for frame assembly. Table with parking brake. Support platform with cross beams and one extension to the left and right, each with felt pad. Base dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, working height adjustable 900 – 1100 mm. Pos. 4.1 – Article 5360-01 1 piece fixed tool tray, 1000 x 400 mm for RU-DR-1. Pos. 4.2 – Article 6354 1 piece 3-meter double guide rail for mobility unit, rail height 10 mm. Pos. 4.3 – Article 6454 1 piece mobility unit with flanged track wheels and parking brake. Pos. 4.4 – Article 6788 1 piece corner screw device. 1 pair of pneumatically height-adjustable clamping units for securing profiles at right angles. Pos. 5.0 – Article 10383000 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilt system. Working platform with 4 support bars, base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Tabletop covered with felt. Tilting table height adjustable from 900 – 950 mm. 2 folding and sliding support plates installed.

Condition: ready for operation (used), Year of construction: 2013, An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible. Iodpfx Aasyv H E Soletd

Condition: used, 15” chuck + C axis live tooling Maximum swing (mm): Ø800 Itodpfx Ajyr Dixsalod Maximum turning length (mm): 600 Maximum turning diameter (mm): Ø550 Spindle speed (rpm): 2,000 Live tooling (4 pcs axial) Chip conveyor FANUC 21i TB CNC controller Year of manufacture: 2010

Condition: good (used), Year of construction: 2015, Control Heidenhain Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (x/y/z) Table size 840 x 420 mm BBT 30 Max. speed 10,000 rpm Direct position measuring system X,Y,Z External blown air Handwheel Nano package (increase in temperature stability) Renishaw measuring probe OMP 40-2 Automation interface incl. automation door on the left and preparation for hydraulic interface Chip conveyor (increased discharge height 1050 mm) IKZ 40 bar Additional coolant tank 400 l Coolant-blown air switchover Additional nozzles on the headstock and in the magazine Flushing in the work area via additional nozzles Flushing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for Control cabinet, spindle and spindle motor) 2-circuit clamping hydraulics with control panel Control cabinet lighting PLC project file Single load detection E1 closure BDE interface Electronic key system Max. table load 300 kg Tool changer: Number of tool positions 15 pos. Max. tool diameter 80 mm Max. tool length 250 mm Max. tool weight 3 kg Change time chip - chip 1.5 sec Feeds: Feed speed 1 - 60,000 mm/min. Rapid traverse 60 / 60 / 60 m/min Max. feed force 5,000 N Ijdpfx Aovzahxsaljtd Total power requirement 25 kVA Machine weight approx. 4.1 t Space requirement approx. 3.0 x 3.0 x 2.8 m