Used Test Press Heat for sale (34,312)

Condition: used, Julabo Type: FP51-SL (v.2) Julabo recirculating thermostat SL v2 with cooling unit FP51 – heating/cooling thermostat Description: For sale is a professional Julabo recirculating thermostat SL (v2) in combination with the Julabo cooling unit FP51. The device is used for the precise temperature control of liquids and external circuits. It is ideal for laboratory, industrial, and test bench applications. The system enables both heating and active cooling and impresses with stable and accurate temperature control. Technical data (excerpt): Recirculating thermostat: Julabo SL (v2) Hsdjzizn Sspfx Abkjnu Temperature range: approx. +20 °C to +320 °C Mains connection thermostat: 230 V / 50–60 Hz Cooling unit: Julabo FP51 Mains connection cooling: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection class: IP21 Dimensions & weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Hnjdpfsz Rk N Hex Abksu Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Hnedpfxoz Rk Rke Abkou Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Hodpfx Abjziyxcjkjnu Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have on the phone.

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller Hsdpfx Aszf Hi Hobkjnu RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: used, Espec Climate testing chamber / temperature testing chamber Espec PL-4J climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / temperature testing chamber Year of manufacture: 2020 Test chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. power consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable entry Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Hnodpfjzntxmox Abkou Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 7018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 190 liters Dimensions (approx.): Width: 870 mm, Depth: 1,550 mm, Height: 1,800 mm Test chamber dimensions: Width: 580 mm, Depth: 450 mm, Height: 750 mm Weight: approx. 460 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 3 K/min Max. heat compensation: approx. 1,500 W Temperature deviation (time-related): ± 0.1 to ± 0.3 K Climate range (temperature): +10 °C to +95 °C Humidity range: 10 to 98 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg ND max.: 22.5 bar g HD max.: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Hnsdpfx Abezm Ni Ejksu ND max.: 22.5 bar g HD max.: 25 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.9 kW Rated current: 16 A Equipment Touch panel control Programmable controller Stainless steel interior Temperature and humidity control LAN/Ethernet interface Viewing window with internal lighting Documentation / Operating manual Test reports Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Workshop-checked Moisture absorber replaced Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC³ 7018 climate testing chamber Documentation / Operating manual Test reports Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Hnjdpfxjzntunj Abkou Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm Hedpfozizmbsx Abkenu External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Hodpfozznx Ijx Abkonu 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Hodpfx Ajz Akcfjbkonu Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled Hnedpfszzag Dox Abkju For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VCS³ 7034-5 Climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Hnjdpfx Abezpihaekou Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7.0 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2.0 K Climate range (temperature): +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittent) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test object protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Hjdpfx Abszqmx Eokonu Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate test chamber / Temperature test chamber Vötsch VC³ 0034 Climate test chamber Temperature and climate test chamber, air-cooled For sale is a used climate test chamber from the manufacturer Vötsch Industrietechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Hedozgb Awjpfx Abkonu Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Equipment type: Climate test chamber / Temperature test chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Weight: approx. 490 kg Temperature range: -10 °C to +90 °C Temperature change rate, heating: approx. 1 K/min Temperature change rate, cooling: approx. 0.3 K/min Max. heat compensation: approx. 200 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1 K Climate range, temperature: +10 °C to +90 °C Dew point range: +4 °C to +89.5 °C Humidity range: 10 to 98 % RH Refrigerant: R404A Refrigerant quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.3 kW Rated current: 10 A Water tank: 20 liters Protection class: IP54 Noise level: approx. 46 dB(A) Equipment SIMPAC control Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface RS232 interface RS485 / RS422 interface Test specimen protection function Cable glands Documentation / Operating manual Accessories according to images Areas of application Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x Vötsch VC³ 0034 Climate test chamber Documentation / Operating manual Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Hnsdpfozgcqvsx Abkeu Temperature test chamber / climate test chamber Weiss WT-270/70/10 temperature test chamber Temperature test chamber, water-cooled, -70 °C to +180 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The test chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Weiss Umwelttechnik GmbH Type: WT-270/70/10 Device type: Temperature test chamber / climate test chamber Test chamber volume: approx. 270 liters Test chamber dimensions: approx. 580 x 750 x 615 mm (W x D x H) Housing dimensions: approx. 870 x 1775 x 1745 mm (W x D x H) Weight: approx. 835 kg Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 10 K/min Temperature change rate cooling: approx. 14.5 K/min Temperature deviation over time: ± 0.3 to ± 0.8 K Temperature deviation spatially: ± 0.5 to ± 2 K Refrigerant: R404A / R23 Refrigerant quantity R404A: 6.5 kg Refrigerant quantity R23: 2.3 kg Maximum suction pressure: 19 bar g Maximum discharge pressure: 25 bar g Standby pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 14 kW Rated current: 26 A Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side openings Shelf / test chamber equipment as shown in the pictures Control cabinet Main switch panel Connector panel RS232 interface Documentation / operating manual Accessories as shown in the pictures Application areas Temperature testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Weiss WT-270/70/10 temperature test chamber Documentation / operating manual Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Hnedpfxszlgyro Abkeu Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 53.6 kW (72.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 701 kg, input voltage: 400 V, total width: 2,250 mm, total length: 1,400 mm, total height: 1,800 mm, warranty duration: 12 months, heating capacity: 54 kW (73.42 HP), Aircooled chiller/Heat pump LENNOX GAH055SM2M 53.6 kW/54 kW Cooling capacity: 53.6 kW / 15.24 tons (12/7 — 35°C) Heating capacity: 54 kW / 15.35 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP120KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Dimensions: 1.4x2.25x1.8 m. Weight: 701 kg. Hnedpfxjz R Rhdj Abkju Working hours: 74/58 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Hedsziycbspfx Abkonu Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data:   Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Hjdpfezizmnsx Abkjnu Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Hnjdpfeziyx Nox Abkju Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VT 3050 Hodpfx Aboziizaeksnu Assemblies / Test cabinet: Temperature chamber Air-cooled Test chamber volume: 500 liters Temperature range: -30°C / +100°C Temporal temperature fluctuation: K ±0.5 Spatial temperature fluctuation: K ±1.5 Temperature gradient: K 3 Rate of change: Heating: K/min 2.0 Cooling: K/min 1.4 Heat compensation: max. W 650 Calibration values: +23°C, +80°C Test chamber dimensions: Width 710 mm, Depth 590 mm, Height 1250 mm External dimensions: Width 940 mm, Depth 1030 mm, Height 1955 mm Sound pressure level: db(A)

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: Hnjdpfx Aozp D Alobksu External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, VLM Type: V.745.672.120, Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (W x D x H1/H2): 1400 x 800 x 800/1020 mm Door opening dimensions (W x H): 1300 x 680 mm Housing external dimensions (W x D x H): 2162 x 995 x 2080 mm Operating temperature range: 5°C > ambient temperature to +80°C Heavy-duty design for a load capacity of up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 memory locations for test procedures, 50 memory locations for test segments, ramps: Humidity and temperature control across the entire working range, Ethernet connection Hnjdpfx Abezg Tl Rokju Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar, tap connection 3/4" external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end AD 75 mm Operating modes: Salt spray Condensation water (CWC) Ventilation with ambient air Warm air Controlled humidity

Condition: used, Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Device dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Thermal compensation at +20 °C: 350 W Climate tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Humidity deviation (over time): ± 1 to ± 3% RH Temperature deviation (over time): ± 0.1 to ± 0.3 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Hnodpsziypujfx Abkju Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.