Used Falcon 275 for sale (1,002)

Condition: used, Year of construction: 1999, saw blade diameter 275 mm Dwedjl R Nnnopfx Aa Ioc capacity 90 degrees: round 80 mm capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Year of construction: 2015, condition: ready for operation (used), travel distance X-axis: 650 mm, number of axes: 3, This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details. Dsdpjzu R Rtofx Aa Iewc - Handwheel Graduations: 0.01 mm, 0.002 mm, 0.2 mm- Control Panel: Dedicated pendant control panel featuring an emergency stop button and an analog meter

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 109 h, axle configuration: 4x4, mast type: telescopic, lifting height: 290,000 mm, overall weight: 3,750 kg, empty load weight: 3,750 kg, fuel type: hybrid, Equipment: all wheel drive, An authorized SUBARU dealer in Łaziska Górne has a professional FALCON FS290 spider lift from 2014 for sale. The machine was directly imported from Denmark from its first owner. Since new, it has only operated for 109 original operating hours, putting it in very good technical and visual condition. It has current inspection certificates issued in Denmark. This is a self-propelled, wheeled version, equipped with its own drive system and a reliable HONDA gasoline engine. The lift can move independently around the worksite and perform tasks without access to an external power source. The FALCON FS290 provides up to 29 meters of working height and a maximum horizontal reach of approximately 14 meters. At the same time, its minimum transport width is about 80 cm, allowing it to pass through narrow gates and standard door openings. This is an ideal machine for working in halls, warehouses, shopping centers, industrial facilities, churches, theaters, airports, and anywhere where a large reach is required in a limited space. Key information: Brand: FALCON Model: FS290 Year of manufacture: 2014 Operating hours: only 109 original operating hours Type: spider lift Version: wheeled, self-propelled Gasoline engine: HONDA - power generator Number of owners: 1 Country of origin: Denmark Current inspection certificates issued in Denmark Technical and visual condition: very good Technical data: Maximum working height: 29 m Maximum platform height: approximately 27 m Maximum horizontal reach: up to approximately 14 m with a 100 kg load Horizontal reach with a 200 kg basket load: approximately 12 m Maximum basket load capacity: 200 kg Basket dimensions: approximately 1.40 × 0.80 m Transport length: approximately 6.30 m Minimum transport width: approximately 0.80 m Transport height: approximately 1.98 m Curb weight in standard configuration: approximately 3750 kg Turning radius: approximately 3.30 m Ground clearance: approximately 25–32 cm Slope climbing ability: approximately 5–15°, depending on the machine configuration Adjustable outrigger spacing Dwjdpfxjz Dh R Hs Aa Iec The lift has adjustable outrigger settings, allowing the working area to be adjusted to the available space: Narrow setting: approximately 3.60 × 3.60 m Intermediate setting: approximately 4.60 × 4.60 m Wide setting: approximately 5.40 × 5.40 m Key advantages of the machine: Only 109 original operating hours One owner since new Powerful and reliable HONDA gasoline engine Self-propelled wheeled drive system Ability to move efficiently around the worksite Up to 29 meters of working height Horizontal reach up to approximately 14 meters Basket load capacity up to 200 kg Compact transport width Ability to pass through narrow entrances Adjustable outrigger spacing Low weight in relation to the achieved height Ability to work over obstacles Designed for indoor and outdoor use Current technical inspection certificates from Denmark Very good technical and visual condition We offer transport within the European Union. The stated price is net and applies to export and business customers. A substantial discount is possible for individual customers. Please contact us directly by phone to get your best price.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. Dwjdpfx Aoz Irbqsa Ioc This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: good (used), Year of construction: 2017, operating hours: 1,997 h, fuel type: hybrid, color: white, Weights Empty weight: 6.100 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.300 cm Dimensions of cargo space: 740 x 125 x 199 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1900 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS330Z * 2017 * 1197 working hours Dwsdpfozg Nyqex Aa Iec * Diesel and Battery * 33 meter working height * 19 meter horizontal reach * 200 kg lifting capacity * Automatic outrigger * Remote control * 6100 kg own weight * Including documents

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Dedsz It Dmspfx Aa Iewc OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2016, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm control DELEM oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm Very good condition (!!) Current new price: 75.0000 Euros Special price on request ----- POWER BEND PRO electro-hydraulic press brake featuring: * Increased daylight opening (installation height) * Increased cylinder stroke * Increased throat depth ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control DA 56 - 2D graphics * Bending sequence calculation * Product/tool ??library * USB interface - CNC-controlled axes: Y1 - Y2 - X - R + CNC crowning - CNC motorized backgauge * Backgauge with R-axis, on recirculating ball screws * Travel ranges: X = 800 mm // R = 250 mm * X-axis travel speed: 230 mm/s * With 4 manually adjustable backgauge fingers - ROLLERI "gooseneck" (swan-neck) upper tool "PS 135.85-R08", System "A" * Includes quick-change clamping * Includes crowning system integrated into the tool holder - ROLLERI sectional universal die block "M 460 R" * Includes 1x die holder "C 1050-R" Dodsz Npz Ejpfx Aa Iowc * Additional 1V dies (see image 9) - Rear safety device: Light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (incl. FPSC) * Pivoting doors (front left & right) are missing (!) - 2x front... Support arms with SLIDING system (HIWIN sliding bearings) - 1x freely movable dual foot pedal - CE mark / Declaration of Conformity - Operating manual incl. circuit diagram

Condition: used, functionality: unexamined, machine/vehicle number: BM 86B320, ELBO VISUALIZER - DIVIDING TABLE - VISE Dodey Ndqxspfx Aa Iowc

Condition: good (used), Year of construction: 2016, operating hours: 601 h, mast type: telescopic, fuel type: hybrid, color: white, Drive: Wheel Working height: 2.900 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Please contact Vink Machinery for more information Falcon Spider FS290 * 2016 •⁠⁠601 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range Dwodpfstxxqwox Aa Isc * 4 Meter negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Dodpfoz I Swfox Aa Iewc

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer 1.5" Inlet & Outlet Dwodpjym Akkofx Aa Iec 3 ~ Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: good (used), Year of construction: 2018, operating hours: 718 h, mast type: telescopic, fuel type: hybrid, color: white, Drivetrain Drive: Wheel Functional Working height: 2.900 cm Dimensions of cargo space: 700 x 80 x 200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Additional information Please contact Vink Machinery for more information Falcon Spider FS290 * 2018 •⁠⁠718 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 meters negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents Dedpfjtync Sox Aa Iewc

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Dwodpfxezrd Aqs Aa Ioc Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Dwjdpfx Aozrdl Ssa Ioc The machine has not been inspected but was operational until the end.

Condition: used, Year of construction: 2012, TREIF Falcon Hybrid Portion Cutter – 2012 For sale: TREIF Falcon Hybrid portion cutter, year 2012, complete with infeed weigher and checkweigher with automatic reject system. The machine has recently been serviced and is in very good working condition. It was recently removed from production and is available for immediate delivery. The Falcon Hybrid is designed for high-precision portion cutting of meat products, using advanced measuring technology to achieve accurate weight portions and optimal yield. It can process both bone-in and boneless productswith consistent precision. Key Features - Year: 2012 - Complete system including infeed weigher and checkweigher with automatic reject - Recently serviced - Excellent working condition - Immediately available Typical Specifications - Maximum cutting capacity: up to 550 cuts per minute - Maximum product cross section: approx. 260 × 155 mm Dwsdsyux Eaopfx Aa Ioc - Maximum product infeed length: up to 1000 mm - Installed power: 11.7 kW This machine is ideal for meat processing plants requiring precise weight portioning with integrated quality control. Price: On request Location: The Netherlands Availability: Immediate For more information, photos, or a video of the machine in operation, please contact us.

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Dedpfx Asz Ipt Dsa Iowc Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Year of construction: 2009, condition: excellent (used), Falcon / Chevalier QP2033-L Machining Center - Very good condition (hardly used) - Accessories included (tool holder, 3D probe, vices --> see photos) TECHNICAL DATA Work table Size: 1000 x 510 mm T-slots: 5 x 18 mm x 1000 mm Max. load capacity: 500 kg Travel ranges X-axis: 850 mm Y-axis: 520 mm Z-axis: 510 mm Spindle Distance from spindle nose to work table: 150 – 660 mm Spindle nose: BT40 Speed: 80 – 8000 RPM Spindle diameter: 70 mm Djdpfx Aeiqt S Uja Iswc Feed rate X, Y, Z: 30/30/24 min Accuracy Positioning accuracy: P0.014 (+- 0.004 / 300 mm) Repeatability: PS 0.010 (+- 0.003 mm) Tool changer Number of tools: 24 Max. tool diameter 76 mm / 120 mm Max. tool weight: 7 kg Dimensions and weight Dimensions: 2360 x 2060 x 2583 mm Weight: 5500 kg We assume no liability for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications Dodjzlyv Tspfx Aa Iswc • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Year of construction: 2011, condition: used, Vacuum pump capacity: 100m³/h, final vacuum: 99.98%, vacuum chamber: aluminum, housing: stainless steel, power: 3.5kW. Machine dimensions X/Y/Z: approx. 900mm/820mm/1070mm. The machine is fully functional and has no gas flush system. Documentation available. An on-site inspection is possible. Dodpez Aggaofx Aa Ijwc

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Djdszycq Aopfx Aa Iewc

Condition: used, Year of construction: 1970, Year ca. 1970 magnetic plate size 520 x 200 mm weight of the machine ca. 1,4 t Dwedpfx Aajirazpe Ioc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: AC, total height: 1,620 mm, total length: 830 mm, total width: 900 mm, overall weight: 110 kg, cutting range round steel at 90°: 80 mm, saw blade diameter: 275 mm, saw drive: 1,500 W, Exhibition machine, like new Year of manufacture: 2022 - Suitable for steel - Two cutting speeds - Reduction gear, low-noise operation in oil bath - Automatic membrane coolant pump with standard coolant filter - Movable safety guard ensures optimum safety during cutting - Control handle with safety switch Dodpfx Aexrz Ikoa Iswc - Electrical system in low voltage (24 volts), equipped with emergency stop button, main switch, speed selection switch, and overload protection - Machine head rotatable 45° to both sides - Quick-release vice tiltable 45° to both sides - Quick-release vice with double clamping device ensures precise, burr-free cuts - Quality Made in Europe

Condition: like new (used), Year of construction: 2018, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table Dedpfx Aasyfg D Ss Iewc stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2.000 bar Working hours: 15.571 h

Condition: new, functionality: fully functional, Year of construction: 2025, color: white, overall weight: 2,500 kg, maximum load weight: 2,500 kg, empty load weight: 2,500 kg, loading space volume: 90 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Wohncontainer FALCON, Sun Container GmbH | Office Containers | Living Containers | Construction Containers | Model FALCON | 240 × 600 cm | High-quality & flexible solution Our containers, which are immediately available, can be inspected and collected directly from our warehouse. Our office and living containers offer an excellent solution for a wide range of applications and impress with outstanding quality, high flexibility, and short delivery times. Technical Details Dimensions: • Length: 240 cm • Width: 600 cm • Height: 250 cm • Weight: 1450 kg Insulation & Construction Dwjdpfevv Ukksx Aa Ijc • Ceiling/Wall: 5 cm PUR (Polyurethane) • Particularly robust and special floor chassis • 2 mm thick galvanized steel sheet • Glazing with stone wool insulation between the panes • Optional: 10 cm insulation (PUR, PIR, or stone wool) available • Floor: 16 mm fiber cement board + PVC covering Equipment & Quality • 1 room • 1 front facade with floor-to-ceiling, full-surface fixed glazing • 1 floor-to-ceiling window • 1 glass entrance door • High-quality window and glazing systems from REHAU for optimal thermal insulation and durability Colors • RAL 9002 High-quality workmanship for long-term use Storage & Delivery • Stock item: same-day shipping possible • Not in stock: production time per model approximately 2–4 weeks • Worldwide shipping: reliable and professional delivery to all countries • Custom sizes: production according to customer-specific requirements possible 📍 Showroom Address: Am Schafhaus 28, 53557 Bad Hönningen Germany We are happy to provide further information or tailor-made solutions!

Year of construction: 2000, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 200401, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Dodpfxezzz Eue Aa Iswc Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.