Used Spark Erosion Edm for sale (690)

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric Control Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic Wire Threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä17326 Dcsdpfx Aexpfy Sjg Djf

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Completely Refurbished OPS Ingersoll Gantry 500 Eagle Die-Sinking EDM Machine – Excellent Technical and Visual Condition The machine has undergone a comprehensive, professional refurbishment in our facility and is in outstanding technical and cosmetic condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts, including ball guides and drive spindles, were thoroughly inspected and replaced where necessary. This was followed by a complete geometric measurement, alignment, and additional verification using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. Every hose, including hydraulic and pneumatic lines, was completely replaced. Furthermore, the machine has been fully repainted and visually presents itself in an impeccably maintained state. The generator and control system were cleaned and technically tested. The generator’s cooling unit was also cleaned to ensure reliable cooling and consistent operation. Finally, the machine underwent an extensive EDM test in accordance with OPS Ingersoll's quality and testing standards. The machine is immediately available and is ideally suited for reliable production use. Technical Data: Manufacturer: Ingersoll (OPS Ingersoll) Die-Sinking EDM Machine Model: OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn – quick programming Powertec Handheld – multifunctional manual control device Manual eroding via Powertec Handheld High-Speed Jump: max. 18 m/min Generator output: 60 Ampere, EAGLE Powertec Travel paths (X, Y, Z): 525 x 400 x 450 mm Electrode changer: 20-position pick-up carousel Work tank (W x D x H): 770 x 670 x 440 mm Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Accessories: Dsdpfjyiz T Njx Ag Docf CO2 fire extinguishing system Integrated cartridge filter system Special features: Linear measuring system on all axes (Z axis standard in series)

Year of construction: 2006, condition: good (used), Welding fume extractor,dust collector,self-cleaning filter,pneumatic,vacuum RITTER brand. For welding, grinding, sandblasting and all kinds of dry dust. Cartridge filter in good condition. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. The device for continuous operation Fan in sound absorbing housing with power 2,2 Kw Capacity 1200 m3/h Dcodpfxjhyg Ivs Ag Dof Filtration surface 10 m2 Additionally equipped with automatic spark detection and extinguishing system. The spreading of sparks is usually caused by the operation of production machinery or material contamination. The result is downtime and loss of business, and often a serious threat to human life. Therefore, in order to eliminate such risks, pneumatic and mechanical conveyor systems must be monitored for sparks and protected by spark extinguishing systems.

Condition: used, Year of construction: 2012, operating hours: 5,150 h, functionality: fully functional, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 3,000 kg, total height: 3,400 mm, total width: 2,100 mm, total length: 3,425 mm, table width: 850 mm, quill stroke: 710 mm, type of input current: three-phase, distance table to quill: 250 mm, table length: 1,150 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 7,500 kg, year of last overhaul: 2026, table load: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM314MF30 Operating Interface MF30 Year of Manufacture: 2012 Operating Hours: 5,150h General Overhaul Travel Paths XxYxZ: 905/1020 x 705 x 455 mm Working Table: 1150 x 850 mm (steel table with T-slots) Work Tank: 1200 x 900 mm Fill Height of Work Tank: 500 mm Maximum Electrode Weight: 50/500 kg Workpiece Weight: 3,000 kg Machine Weight: 7,500 kg Machine Dimensions (W x D x H): 2,100 x 3,425 x 3,450 mm Equipment: Color: Silver metallic 30-position Tool Changer Cartridge Filter System Quick-Change Chuck EROWA ITS C-Axis 100 rpm, direct measurement 0.0001° Holding Brake on C-Axis CO² Fire Extinguishing System K&B Fire Protection Flap Fume Extraction with Activated Carbon Filter Integrated Cooling Unit Handheld Control Panel Automatic Tank Level Adjustment External Programming Station EDM Generator 60A Option: With Booster Stage 120A Erosion Power Transport On-site Commissioning Dedpfx Agsyt Ewgo Decf Training

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Dcodpfoyxfqrox Ag Dsf Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: new, Year of construction: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, X: 3000x2000 mm Y: 1500 mm Z: 1000 mm C-axis 360° Positioning resolution Feed range 3000 mm/min Traverse speed 18000 mm/min Working area 4000*2000*1250 mm Table size 3200*1600 mm Dcodpfx Ajxr Uzwsg Dof Distance between head and table without C-axis is 1500 mm and with C-axis 1470 mm Max table load 25,000 kg Machine dimensions 6640 x 5800 x 4120 mm Machine weight 37,000 kg

Condition: used, Year of construction: 2015, operating hours: 10,500 h, Travel range X - Y: 350 x 250 mm Travel range Z: 315 mm Table: Length x Width: 576 x 400 mm Distance: Table to quill: 550 / 240 mm without chuck max. / min. (optional 615 / 305 mm) Dielectric above table: 365 mm Overall dimensions (W x D x H): 900 x 1680 x 2540 mm Total weight (without fluids): 2000 kg Workpiece weight: 500 kg Electrode weight w/o rotary: 50 kg Electrode weight with rotary: 50 kg with manual locking Rapid traverse speed X - Y: 2 m/min Rapid traverse speed Z: 4 m/min Resolution X - Y - Z: 0.001 mm Resolution C: 0.001° Dielectric requirement: 250 liters Generator: genius magic3 Working current: 50 A Suction capacity: 200 m³/h (55 l/sec) Required cooling capacity: 2.5 kW Floor load: 3.5 N/mm² Number of leveling feet: 3 Weight per foot: 1 t Footplate diameter: ø 60 mm Air flow rate: 10 l/min Required air pressure min.: 6 bar T-slots: Number / width / spacing: 4 slots / 10 mm / 3 x 100 mm Dcedpfx Asyvkudsg Djf Paper cartridge filters: 3 pieces Flushing system: 3 pressure ports 1 suction port 1 fine volume pressure port PROGmodEDM programming software Options 16-position electrode changer Accessories: Tool cabinet with drawers; Probe with 5 mm ball Erowa ER-008638 Magnetic plate 200 x 400 mm (SAV) Various electrode holders

Condition: excellent (used), Year of construction: 2018, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 270 mm Dcedpoyv Ezljfx Ag Djf Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA

Condition: excellent (used), Year of construction: 2015, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 270 mm Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Djdpfx Ageyv Eyhj Djcf Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA Working hours: 5.744h

Condition: good (used), Year of construction: 1991, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, Wagner EDM DM 422 die-sinking electrical discharge machine, year of manufacture: 1991, operating hours: 21,391 h, working range X/Y/Z: 500/300/300 mm In good condition. Can be connected if necessary. Dcedpfoyx Ap Eox Ag Dof

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 009, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, Tool changer; Tank - 900x600 mm Dedpfjr Iid Eex Ag Dscf Stroke - 420x320x350 mm

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 300 mm Dsdpfxeyvlxwj Ag Decf MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Condition: used, Year of construction: 2007, operating hours: 128,688 h, functionality: fully functional, machine/vehicle number: 642672, 128,688 h active time (total time the machine was switched on) 21,821 h operating time (net time in which the machine was actively used) Dcodpfx Agjym N Naj Def

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. Dcjdpfxswmn Sze Ag Dof In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Dcedpfjtdkkujx Ag Dsf Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Dcodexrpm Uepfx Ag Djf Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Condition: excellent (used), For sale is a system with 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation for tool and workpiece change. The system is in very good condition and fully functional. Both machines are loaded via the Erowa automation, one machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: Dsdpfoq Su Hnex Ag Djcf X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 642576, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,522 mm, total width: 1,690 mm, total length: 1,900 mm, table width: 500 mm, type of input current: three-phase, table length: 400 mm, overall weight: 2,350 kg, table load: 500 kg, For sale is a premium-quality die-sinking EDM machine from Charmilles, model Roboform 350. The machine is in excellent condition, both technically and visually. Technical specifications: Year of manufacture: 2006 Machine no.: 642576 Dcedpfxsykrckj Ag Def Travel paths (X, Y, Z): 350 x 250 x 300 mm Table dimensions: 400 x 500 mm Max. workpiece weight: 500 kg Max. electrode weight: 50 kg Connected load: 7.5 kVA Current consumption: 10.6 A Voltage: 400 V / 3-phase / 50 Hz Machine weight: 2,350 kg Dimensions (L x W x H): 1,900 x 1,690 x 2,522 mm The scope of delivery does not include chucks or clamping devices; these can be offered separately on request. Transport and loading can be organized throughout Europe at an additional cost. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange is possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINERY AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For more information or contact options, please visit our website.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Dcjdjv Dkvropfx Ag Dsf Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM P600 Year of manufacture: 2021 Powerful and precise die-sinking EDM machine specifically engineered for demanding applications in tool and mold making. Thanks to its state-of-the-art control system, excellent surface finish, and high efficiency, it presents an outstanding investment opportunity for companies valuing precision and cost-effectiveness. Key Features & Benefits: ✅ Large working area & high load capacity: Travel ranges (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1,220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Accurate positioning ensured by linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface finish up to Ra 0.08 μm ✅ Powerful control system & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 16-position electrode changer for unattended machining Dcodpfjyizmijx Ag Dsf Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with stringent quality demands ✔ Complex geometries and fine surface textures The machine will be cleaned, serviced, and thoroughly tested after your order to guarantee top quality and reliability. We are also happy to commission the machine at your facility after delivery.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up Dcsdpfxsgzv Sce Ag Djf AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, mitsubishi EA8 cnc zinc spark machine year of construction 2010 c-axis 4-fold changer x,y,z 300 x 250 x 250 mm generator 60 A max. workpiece weight 550 kg max. electrode weight 25 kg chiller hirschmann mount fire extinguishing system magnet on the table Dodpsyh E N Aefx Ag Docf documentation and diskettes machine is connected for inspection

Condition: excellent (used), Year of construction: 2001, operating hours: 27,265 h, functionality: fully functional, Charmilles Roboform 35 with QCRI robot Year of manufacture: 2001 Operating hours: 27,265 X, Y, Z travel: 355 x 255 x 305 mm C-axis with Erowa chuck Erowa chuck on the table Erowa probe Magnet 3 x aluminium Erowa pallets 320 x 320 mm 35 x electrode holders 50 x 50 mm QCRI robot Dcjdpoyh E A Nefx Ag Djf 4 x pallet positions on the table 54 x electrode holder locations Documentation and diskettes Machine powered up for inspection

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, Exeron S 310 MF Dcjdpfjyh Ei Nsx Ag Dof year of manufacture: 2011 generator hours: 26,882 Do Utjv Nkrdeyfqhekh control: exowin 20 x, y, z 310 x 270 x 270 mm C-axis 3R spindle interface Erowa chuck on bed with magnetic plate generator 64 A C-box for hard metal and PKD 20-fold tool changer fire extinguishing system chiller Erowa aluminum clamping plate documentation machine is connected for inspection

Condition: excellent (used), Year of construction: 2012, Offer very good flexo imprinting machine. Manufacturer is the company Sondermaschinenbau Oschersleben. Flexo machine 1 color. Djdpsqmnfhjfx Ag Dscf Very well maintained condition and ready for immediate use incl. various extras.