Used Wire EDM machines with x-travel of 500-699mm for sale (56)

Condition: good (used), Year of construction: 1998, General Data Measurements width 2610 Measurements depth 3270 Measurements height 2240 Machine weight 2600 Bsg8Qfdp8A8 Control Unit Brand FANUC Model System 16-WB Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Outer width 590 mm Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine.

Condition: good (used), Year of construction: 2013, Only about 11'000 Working hours Datasheet: Dqpqap

Condition: used, Year of construction: 2016, travel -x axis 600 mm travel -y axis 400 mm travel -z axis 350 mm max. workpiece weight 1.000 kg Dqlxl2 wire dia. 0,1 ~ 0,3 mm wire-forward-feed 420 mm/sec Wire Eroding Machine | SODICK - ALC 600 G The machine has has approx. 19,000h cutting hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ALC600G | ALC600 G | ALC-600 G | ALC 600G

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture 2011 Cvqokfscym Charmilles Millenium control system Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine is cleaned and overhauled by us after receipt of order and tested for all functions. We are also happy to carry out an individual test cut for you. We offer the following services on request: - Commissioning of the machine at your premises - Warranty of 6 months - Control training - Accessories such as coolers and clamping devices

Condition: excellent (used), Year of construction: 2006, mitsubishi FA 20 S year of construction 2006 x,y,z 500 x 350 x 300 mm u,v 32mm 15 degree conical maximum at 100 mm high max. workpiece dimensions 1050 x 800 x 295 mm max. workpiece weight 800 kg automatic cutting and threading chiller wire diameter 0,1 to 0,3 mm ( 0,25 mm available) attachment to straighten the wire drawer cabinet (empty) Dpkmbp 2x clamping table documentation machine is connected for inspection

Condition: used, _____ Description: Year of manuf. : 2013 Control : Sonstige Sodick Smart Control Movement X/Y/Z : 600/400/350 mm In General: Year of construction:2013 Control system:Sodick Smart Control Traverse paths X/Y/Z:600/400/350 mm Traverse paths U/V:120/120 mm Taper angle:+/- 25° Dqqppl Work area dimensions:1,050 x 710 mm Workpiece weight max.:1,000 kg Wire feed max.:420 mm/sec Wire diameter:0.1 - 0.3 mm Equipment: Drive system:Linear motors in X/Y/U/V axes Position measuring systems:Direct in X/Y/U/V axes Dielectric tank:800 litres Filter station:3 replaceable paper filters Set-up mode:Manual control unit Wire threading:Automatic Wire disposal:Chopper Wire feeder:Jumbo feeder

Condition: new, The machines of the NeoSpark CNC series are among the most precise wire EDM machines with reciprocal wire guidance on the market. They offer excellent performance when machining electrically conductive materials in mold and tool making. The NeoSpark series is a popular choice for companies that specialize in additive manufacturing and want to separate the finished part from its base plate with high precision. High speed ​​wire cutting guarantees deformation-free and burr-free cutting of even the most delicate 3-D printed metal structures with the best surface quality Ceja8Whv

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.) Dqj8Lz

Year of construction: 1997, Condition: good (used), control Mitsubishi CNC travel X/Y/Z 500/350/300 mm max. workpiece weight 800 kg Bb7Tt2Ue80 table size 780x630 mm

Condition: refurbished (used), Year of construction: 2010, Functionality: fully functional, AGIECUT Vertex 3 Year of construction 2010 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Cm8Un7Qg3M Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION 5 control unit AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is completely cleaned, overhauled and thoroughly tested after receipt of the order. A laser measurement of the axes is carried out at our premises. We would also be happy to carry out an individual test on the Vertex 3 for you. Incl. user training at Techma on your overhauled machine We are happy to offer you an optional service: - transportation - commissioning - Cooling unit - Clamping devices - Consumables

Condition: excellent (used), Year of construction: 2019, operating hours: 540 h, Functionality: fully functional, machine/vehicle number: 396.900.217.2416, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 3,400 mm, workpiece height (max.): 350 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, input voltage: 400 V, worktable length: 1,030 mm, worktable width: 800 mm, input frequency: 50 Hz, nominal current: 13 A, AGIE CHARMILLES CUT E 600 WIRE ERODER MACHINE Excellent Running Condition, can be inspected under power by prior appointment. Videos available on request. Model - CUT E 600 YEAR 2019 CONTROL - GF Charmilles Uhbebfnn2T with tapering facility, cam easy software, 0.1 mm minimum wire capacity, slug jet flush feature. Specifications: WORK AREA 1030 x 800 x 350 mm MAX. PART WEIGHT 1000 kgs LEVEL OF DIELECTRIC MIN./MAX. 0/380 mm AIR SUPPLY PRESSURE 6.5-8 bar AIR MIN FLOW 150 L/min TRAVEL X, Y, Z 600 x 400 x 350 mm TRAVEL U, V ± 50 mm X, Y, U, V, Z MOVEMENT RESOLUTION 0.1 um SPEED OF AXIS MOVEMENT (XYZ) 0-3 m/min MACHINE DIMENSIONS 2160 x 3400 x 2320 MACHINE WEIGHT 4230 KGS

Condition: good (used), Year of construction: 2005, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 570 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 350 mm, workpiece height (max.): 350 mm, workpiece width (max.): 520 mm, workpiece length (max.): 770 mm, net weight: 5,200 kg, Selling our Sodick AQ537L wire EDM machine Machine is in good condition, being sold due to new purchase. Cm0Pigcp9W YEAR OF MANUFACTURE 2005 Inspection under power possible, test cuts also possible. Accuracy of the machine very good. No maintenance backlog, the wire guides, rollers etc. were recently replaced. Due to the linear drives, the machine is very accurate even after years. The many ceramic parts also contribute to accuracy in terms of thermal expansion. Taper deflection in both axes (U and V) +-60mm possible.

Condition: ready for operation (used), Year of construction: 2018, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Bsbshvffgxi Model: CUT E 600 Year of manufacture: 2018 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2018 and it has been in use with us ever since. The machine is under power and will continue to be used. A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase - Training of your personnel - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location - Alignment of the machine - Connecting and commissioning

Condition: used, Year of construction: 2007, Travel distance: Gxc9Jj3 X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Year of construction: 1999, Condition: good (used), Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm Be8Ymkljsd cooling unit

Condition: excellent (used), Year of construction: 2007, operating hours: 17,600 h, Functionality: fully functional, machine/vehicle number: 136056, workpiece weight (max.): 800 kg, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 160 mm, total height: 2,370 mm, total length: 2,660 mm, total width: 2,610 mm, workpiece height (max.): 360 mm, workpiece width (max.): 690 mm, workpiece length (max.): 1,260 mm, overall weight: 5,200 kg, Charmilles Robofil 6050 TW Year of construction 2007 Travel (X/Y/Z): 630 x 400 x 160 mm Bsnlorcdhzs Travel (U/V): +/- 48 mm Taper: 30° at 66 mm height Collision protection on U/V/Z axis Max. Workpiece dimensions: 1260 x 690 x 360 mm Max. Workpiece weight: 800 kg Closed clamping table Table dimensions: 950 x 620 mm Suitable for wire diameters from 0.05 mm to 0.33 mm Twin Wire System for the use of 2 different wire thicknesses Best achievable surface: steel Ra 0.08 µm - carbide Ra 0.05 µm Charmilles Orange control unit 12.1" LCD touch screen Network and USB connection Machine dimensions: 2660 x 2610 x 2370 mm Total weight: 5200 kg The machine is currently being used by our customer and can be viewed by appointment. The machine was extensively overhauled in 2023 and many spare parts were replaced - the condition is absolutely first-class.

Condition: excellent (used), Year of construction: 2010, perfect machine! immersion processing, complete with automatic thread threading. machine with automatic wire changing system particularly suitable for very high precision machining, on fine blanking axis strokes: 600x400x160mm maximum workpiece dimensions: 1,260x690x360mm maximum workpiece weight: 800Kg maximum cutting inclination: 30° usable wire dimeters (with automatic threading) 0.050 - 0.300mm dry weight: 4,000kg Cyyv3Dmr complete with standard and manual accessories visible still installed until week 47/2024

Condition: used, Year of construction: 2002, operating hours: 89,683 h, Functionality: fully functional, Wire erosion machine AGIE Classic 3 , year of construction 2002 , data see picture in the appendix / type plate. Cjhhg9X7Kg The machine is currently still in operation - therefore the operating hours will increase. Current eroding hours: 24609, operating hours: 89683 Machine is sold without guarantee and warranty, no return.

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,400 mm, total width: 2,160 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 5,440 kg, table length: 950 mm, net weight: 4,440 kg, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table load: 1,000 kg, input voltage: 380 V, tank capacity: 1,000 l, Equipment: cooling unit, documentation/manual, fridge, Wire EDM machine Manufacturer: GF Machining Solutions Bhnfg8Op Model: CUT E 600 Year of manufacture: 2016 Travels: X / Y / Z: 600 / 400 / 350 (mm) Extras: 16kg spools Condition: Very good and well maintained condition Terms of payment: 100% before disassembly and loading We are a tool shop and are downsizing our production. We bought the machine new in 2016 and it has been in use with us ever since. The machine is under power and will continue to be used. A viewing and trial run are possible. The machine can be handed over at short notice by arrangement. We can also offer the following with a purchase: - Training of your personnel - Cleaning of the machine - Attachment of transport locks - Loading onto the truck - Transportation with our own truck - Unloading at your site - Bringing the machine to your location - Alignment of the machine - Connecting and commissioning

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: xxxx, Travel distance: X 500 mm Y 350 mm U0Gwfxr3Xx Z 300 mm Water bath machine Automatic wire threader

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, TECHNICAL DETAILS Category: Machine tools-Metalworking machines/ci-2 Machine type: Wire erosion machine Manufacturer: AGIE Model: Vertex 3 Technical data Travel X/Y/Z: 500 mm / 350 mm / 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1,050 x 650 x 250 mm Maximum workpiece weight: 400 / 800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 - 0.33 mm Machine specifications Water bath machine with automatic wire threading 2Jxngyn Automatically lowerable container (accessible from 2 sides) AGIEJOGGER handbox for convenient set-up AGIESETUP 3D Control unit: AGIEVISION 5 Generator: AGIE IPG-V Dimensions and weight Dimensions (L x W x H): 2,800 x 2,400 x 2,220 mm Net weight: 4,500 kg Special features The machine has been completely cleaned, overhauled and extensively tested. Individual tests on the Vertex 3 are available on request. User training at Techma on the overhauled machine included. EQUIPMENT Optionally available: Transportation Commissioning Cooling unit Clamping device Consumables

Condition: refurbished (used), Year of construction: 2011, GF AgieCharmilles Progress VP3 Year of construction 2011 Travels: X= 500 mm, Y= 350 mm, Z= 426 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.10 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG-V generator with power module AGIEVISION 5 control unit Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and overhauled by us after receipt of order. You receive a 6-month warranty on all machine parts. Brwcx2Hol7K We are also happy to offer you commissioning and training

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, max workpiece dimensions: 800 x 570 x 340 mm Dqkleh

Condition: good (used), Year of construction: 2000, Functionality: fully functional, Machine available at our Semsales facility. Bsuqtv70Ig Visits available on request. 17'900 working hours.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Automatic wire threading Water bath incl. cooler Gl7Zac