Used Sink Edm for sale (724)

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Pjdpfx Ajwtd Edocvopp

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Ppedpfxei A I Hfj Acvep Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Ppodpfx Aexx Uatjcvep Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Psdpfjw Ucyusx Acvopp Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Pedpfx Acjxqallovspp Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: ready for operation (used), Year of construction: 1999, operating hours: 80,000 h, machine/vehicle number: 571718, Ingersoll Gantry 800 solid electroerosion machine. Curve: (X,Y,Z,C) 550 / 850 / 450 mm , 360 degrees Machine dimensions: 2,4 x 2,65 x 2,68 m Axis resolution: 0.001 mm Dielectric tank stroke: 440 mm Number of electrodes in magazine: 20 Maximum electrode mass allowed: 15 kg Podop Eclrspfx Acvspp Multipulse generator: max 70A The machine is in working condition. If needed I can provide a video with it machining. I have the user and maintenance manuals, machine parameters and many accessories: EROWA device, electrode holder, tweezers. For more pictures, including a video, please contact me. The machine will come with a lot of accesories. Transport is not included in the price. The price is without VAT.

Condition: ready for operation (used), SARIX ID 500122 Rotation module SN: 00000739 for Microfor HP4-EDM posalux, used, good condition, 100% functional, scope of delivery as per photos Ppjdpfxomq H Uys Acvep

Condition: ready for operation (used), SARIX ID 501014 AXIS SN: 00020217 for Microfor HP4-EDM posalux, used, good condition, 100% functional, scope of delivery as per photos Ppedomq Iaajpfx Acvop

Condition: ready for operation (used), SARIX ID 501015 Server module SN: MK116487 for Microfor HP4-EDM posalux,used, good condition, 100% functional, scope of delivery according to photos Ppodpfxemq Iado Acvep

Condition: used, Year of construction: 2012, Travel distance: X 500 mm Ppjdsuu Dl Repfx Acvop Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Pedpjg Icdysfx Acvspp Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Podpfx Aswl Hiiecvjpp Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered.

Condition: excellent (used), Year of construction: 2008, X,Y travel: 14.6" x 10.6" U,V,Z travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Drive system: AC servo motor/linear motor Wire diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb Taper angle: ±21°/4.33 in (DA+DB=0.6 in) Pedpowqq Rhefx Acvepp Layout (W x D x H): 90.6" x 89.2" x 80.6"

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Ppedew Swd Aopfx Acvop

Year of construction: 2020, condition: as good as new (ex-display), electrode diameter 0,5 to 3mm travels 300x400x350mm ) CE-cretification verifies the best possible safty all Machines in over-floor construction Ppodpfx Ajf Hmn Aocvep Elektrode Ø 0,5-3mm Travel X-Axis 300mm Travel Y-Axis 400mm Travel Z-Axis 350mm Travel W-Axis 300mm Speed W Axis 30-60mm/min Rapid feed Z-Axis 120mm/min removal rate (max.) 300:1 Table dimension 320x440mm max.generator capacity 30A

Condition: good (used), Year of construction: 1980, Travel X/Y/Z 350/250/300 mm, table size 480x360 mm, table - quill 450 mm, max. power 40 A; 4,8 kw; DRO Heidenhain, wire control system 3R, working hours 21383 h Ppsdpfsiv H Egsx Acvep

Condition: used, Year of construction: 2002, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg U / V axis: 770 x 520 mm generator: 60 Ampere Linear drives Pjdpfjw Ei Stox Acvjpp

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :220 mm Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) Ppedevyzgajpfx Acvsp U / V axis: 350mm / 220mm submerged

Condition: used, Year of construction: 2018, Wire erosion / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Pedpfx Ajvtftkjcvjpp Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 300 mm Ppedpjw S Egfefx Acvjp max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 780 mm table size Y: 630 mm with AWF ( Automatic Wire Feeding ) U / V axis: 42 mm generator: 50 Ampere submerged

Condition: used, Year of construction: 2003, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Psdew Ekr Ijpfx Acvepp Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg with AWF ( Automatic Wire Feeding )

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm Psdowf I Imspfx Acvspp max. workpiece weight: 200 kg submerged cooling unit The machine has been serviced annually by the manufacturer.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading can be seen in good working condition year 2002 Pjdpsxf I D Ejfx Acvepp

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg Ppodpfxjxnkblo Acvsp

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Psdpfx Acjxni T Hevopp Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h