Used Eiset Toolroom for sale (58)

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Feds Agu A Sopfx Aikspp Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Fpodpfxjz Rqcye Aikep Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Fpsdpfx Aisz Rqk Rskep Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Fpodpfeziu Hzsx Aikep Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Fpodpfxsxftqdo Aikop Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: S2T238, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 42 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, feed length X-axis: 180 mm, feed length Z-axis: 1,000 mm, quill travel distance: 110 mm, quill diameter: 42 mm, quill stroke: 110 mm, swing diameter over cross slide: 210 mm, turning diameter over bed slide: 330 mm, type of input current: three-phase, swing diameter over bed slide: 330 mm, bar passage: 42 mm, spindle nose: D1-4, center height: 167 mm, bar diameter (max.): 42 mm, travel distance cross slide: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 🔹 For Sale: 2003 Harrison Alpha 1330S CNC / Manual Lathe – 2-Axis, Fanuc Control 🔹 Make: Harrison Model: Alpha 1330S Year: 2003 Type: CNC / Manual Combination Lathe Control: Fanuc Series 21i-MB Condition: Very Good Location: Ireland 📌 Machine Overview: The Harrison Alpha 1330S is a versatile 2-axis CNC/Manual lathe, offering the perfect balance between traditional manual turning and modern CNC precision. Built in the UK and controlled via a Fanuc 21i-MB, this machine is ideal for small batch production, toolrooms, maintenance departments, and educational use. With a compact footprint and generous turning capacity, it’s a reliable and easy-to-use solution for both skilled machinists and CNC programmers. Whether you're running single parts manually or repeat jobs with CNC automation, the Alpha 1330S delivers flexibility and accuracy. ✅ Key Features: Combination CNC/manual functionality Compact, easy-to-install design Fanuc 21i-MB control – intuitive and reliable Dual spindle speed ranges for versatile applications Suitable for one-offs, training, and batch work Quickchange tool post system for rapid setups Comprehensive manuals included 🔧 Technical Specifications: Axis Configuration: 2-Axis Max Turning Diameter: 330 mm Max Turning Length: 1,000 mm Swing Over Bed: 330 mm Swing Over Cross Slide: 210 mm Height of Centres: 167 mm Spindle Bore: 42 mm Spindle Nose: D1-4 Spindle Taper: MT3 Spindle Speed Ranges: Range 1: 0 – 2,000 rpm Fpjdpfx Aijwtq T Iokjp Range 2: 0 – 3,500 rpm Main Spindle Motor: 7.5 kW Feedrate (Manual): 0.03 to 0.6 mm/rev Feedrate (CNC): Up to 5,750 mm/min Rapid Traverse: X Axis: 3,000 mm/min Z Axis: 6,000 mm/min Cross Slide Travel: 180 mm Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT3 Electrical Requirements: 415V / 3-phase / 50Hz Power Supply Needed: 19 kVA 🧰 Included Accessories: Quickchange Tool Post & Tool Holders Set of Manuals 📈 Applications: General Turning Prototyping Educational Training Repair & Maintenance Work Toolroom Operations Short Batch CNC Machining Harrison Alpha 1330S for Sale CNC Manual Lathe with Fanuc Control Used CNC Lathe Ireland 2-Axis CNC Lathe for Sale Combination CNC and Manual Lathe Harrison Alpha Lathe with Fanuc 21i-MB Precision CNC Lathe for Small Batch Work Used Harrison Alpha 1330S UK / Ireland Educational CNC Lathe with Manual Option Compact CNC Lathe for Toolroom Used CNC Lathe for Sale in Ireland CNC Machinery Dublin / Cork / Galway Buy Harrison Alpha Lathe Europe Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1071619, HAAS TM-3P Vertical Machining Center (Toolroom Mill) - Fully Operational Fodpfo Ain Itex Aikepp Description: For sale: A HAAS TM-3P Vertical Machining Center in fully operational condition. The machine is currently used as the primary production mill in our facility, meaning it is meticulously maintained, reliable, and ready for immediate work. Can be inspected under power upon appointment. Technical Specifications: Manufacturer: HAAS Automation (USA) Model: TM-3P (with full enclosure) Year of Manufacture: [Insert Year, e.g., 2012] Control System: HAAS CNC Control Spindle Speed: 6,000 RPM HIGHT SPEED MACHINING PROGRAMMABLE COOLANT Spindle Taper: CAT 40 Tool Changer (ATC): 10-station automatic tool changer X-Axis Travel: 40" (1,016 mm) Y-Axis Travel: 20" (508 mm) Z-Axis Travel: 16" (406 mm) Table Size: 51.75" x 14.5" (1,314 x 368 mm) Spindle Motor: 7.5 HP Condition & Delivery: Condition: Excellent, running daily. Full demonstration available. Spindle Hours: [Insert Hours] Delivery Terms: EXW (Ex Works) - Dismantling and loading are the buyer's responsibility. Location: Greece

Condition: used, Hurco TM6i, 2 Axis CNC Lathe, Year 2013, Tailstock, Collet Chuck, Swarf Conveyor, Air Bench Filtermist, Hydrafeed MSV 65 Bar Feed Unit, with 3 Jaw Chuck Fodpfx Ae Aggphsikjpp Hurco TM6i CNC turning centre with slant bed design. Compact and reliable CNC lathe suitable for precision machining, subcontract engineering and production work. The Hurco TM6i CNC Turning Centre is a compact slant bed CNC lathe designed for precision machining and efficient production of turned components. Suitable for subcontract engineering, toolroom and general manufacturing applications, the machine offers a practical solution for a wide range of turning requirements. Manufactured by Hurco, a respected builder of CNC machine tools, the TM6i is designed to provide reliable performance, machining accuracy and operator-friendly operation. Its rigid construction and compact footprint make it well suited to both production environments and smaller engineering workshops. The machine is capable of producing a wide variety of precision components and represents an excellent opportunity to acquire a quality CNC turning centre from a recognised manufacturer. Available for inspection at our Prestwick, Ayrshire facility. Specifications: Swing: 15.94" Machining Length: 13.4" Chuck Size: 6.65" Bar Capacity: 1.75" Power: 17.5 hp Max RPM: 6,000 RPM Turning Dia: 12.4"

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 3,700 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: BERNARDO URS 1000 N universal cylindrical grinding machine, year of manufacture 2021. The machine is virtually new and has only been used a few times. It was originally purchased as part of an expansion of our machining capabilities. Following a change in the company's business profile, the machine was not put into regular production. The sale is therefore not related to any technical fault or machine failure. The machine is in excellent condition with minimal signs of use. It is designed for precision external cylindrical grinding as well as internal grinding. With a distance between centres of 1000 mm and a grinding diameter of up to 320 mm, it is suitable for toolrooms, machining companies, shaft production and refurbishment, machine-part manufacturing and small-batch production. Direct sale by the machine owner – SAWA Electronic, Poland. Main technical data: year of manufacture: 2021 distance between centres: 1000 mm centre height: 180 mm external grinding diameter: 8–320 mm maximum workpiece weight: 150 kg internal grinding diameter: 30/35–100 mm maximum internal grinding depth: 125 mm workhead spindle speed: 25–220 rpm grinding wheel: 400 × 50 × 203 mm grinding spindle speed: 1670 rpm internal grinding spindle speed: 10,000 rpm grinding head swivel range: ±30° hydraulic table feed digital position readout power supply: 400 V machine weight: approx. 3700 kg overall dimensions: approx. 3700 × 1900 × 1500 mm Equipment includes: internal grinding attachment 3-jaw chuck Ø200 mm Fpedpfx Aiozz Nbwsksp steady rests coolant system digital readout grinding wheel dressing device grinding wheel balancing equipment Price: PLN 62.000 net + VAT Price: EUR 14.200 net + VAT Machine location: Regimin, Mazowieckie, Poland. Inspection and machine demonstration possible by prior arrangement.

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Fpodey Iz Rmjpfx Aikep Misc.accessories MARCELS MASCHINEN CH

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 MA Machine No. 2204-1734, Serial No. 25842, Year of manufacture 1989 CNC path control: GRUNDIG Contur 2 Travel distances: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 18 speeds Feed rate: max. 2000 mm/min Distance table - spindle nose: max. 480 mm Arbor displacement, vertical: 80 mm Arbor displacement, horizontal: 150 mm Main spindle drive: 3.7 / 4.4 kW Fodpfxjzwmc Rj Aikopp Power supply: 400 V, 50 Hz, 13 kW - CNC path control: GRUNDIG Contur 2 with TFT screen - Hydro-mechanical tool clamping - Swiveling control panel - Electronic handwheel for all three axes - Mechanical handwheels for all three axes - Fixed angular table - Coolant system in the machine base - Central lubrication - Control cabinet located next to the machine, dimensions W x D x H: 800 x 750 x 1150 mm Space required, dimensions W x D x H: 2400 x 2300 x 2000 mm Weight: approx. 2400 kg In good condition

Condition: ready for operation (used), functionality: fully functional, turning length: 630 mm, center height: 270 mm, center height in crank: 138 mm, metric thread pitch (max.): 10 mm, metric thread pitch (min.): 25 mm, turning diameter over cross slide: 250 mm, turning diameter over bed slide: 250 mm, turning diameter: 250 mm, total width: 2,975 mm, center width: 900 mm, disc diameter: 250 mm, total height: 1,100 mm, total length: 2,750 mm, clamping diameter: 250 mm, cone mount: 5 mm, rotational speed (min.): 28 rpm, spindle motor power: 4,000 W, swing diameter over cross slide: 250 mm, swing diameter over bed slide: 250 mm, pivoting range: 360 °, quill diameter: 80 mm, quill stroke: 16 mm, quill travel distance: 32 mm, rotational speed (max.): 450 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Relieve Turning Lathe NILES DH 250/4 (Specialized relieving and profiling lathe) The NILES DH 250/4 is a precision relieve turning lathe designed for the efficient execution of profile turning, relieving, and finishing operations on cylindrical parts up to 250 mm diameter. Manufactured by NILES, a reputable German machine tool builder, this machine combines rigid mechanical construction with smooth motion control to deliver consistent results in demanding workshop environments. This machine is ideally suited for toolrooms, repair shops, and manufacturing facilities where relief turning of tools and components is required. Its sturdy built-in relieving device ensures high accuracy and repeatability for profiling tasks, including operations that cannot be performed easily on standard lathes. The faceplate diameter of 250 mm accommodates a wide range of workpieces up to 250 mm in turning diameter, with a turning length of 630 mm. Workpieces are securely positioned on the well-designed center system, featuring a center height of 270 mm over bed parallels and a center width of 900 mm. The machine’s removable chuck plate and Morse taper No. 5 mount provide flexibility for different holding and tooling options. The lathe’s spindle offers an infinitely variable speed range from 28 to 450 rpm, driven by a robust 4 kW spindle motor, allowing precise speed selection for both rough and finish relieving cuts. The built-in quill is 80 mm in diameter with a maximum stroke of 16 mm, enabling controlled profiling movements. The NILES DH 250/4 is supported by its factory documentation, making it straightforward to integrate into industrial workflows and maintenance routines. The overall construction — approximately 2750 mm in length, 2975 mm in width, and 1100 mm in height — reflects its stable and durable design. Key Features: *Relief turning lathe for specialized profiling operations *Maximum turning diameter: 250 mm *Turning length up to 630 mm *Faceplate diameter: 250 mm *Center height: 270 mm *Infinitely variable spindle speed: 28 – 450 rpm *Spindle drive power: 4 kW *Quill diameter: 80 mm, stroke 16 mm *Morse taper No. 5 spindle mount *Heavy industrial construction with factory documentation Fpsdpfx Aiox Sq H Seksp Typical Applications: *Relieving and profiling cylindrical components *Tool relief turning and finish profiling *Small series specialized machining *Maintenance and toolroom work

Condition: used, JONES & SHIPMAN 1307 EIT Precision Toolroom Universal Grinding Machine Model 1307 EIT Maximum grinding diameter 356 mm Grinding length between centres 1016 mm Maximum swing 356 mm Workhead speeds 6 speeds, 40 – 320 rpm Grinding wheel size 300 x 25 x 127 mm Grinding wheel speeds 1750 / 2300 rpm Wheelhead motor 3 kW Internal grinding spindle speed 16,000 rpm Floor space required 3207 x 1359 mm Weight 1930 kg Fpedjzi Eqqopfx Aikop Supplied with: Double Swivel Wheel Slide, Double Wheelhead, Internal Grinding Spindle, 3 Jaw Chuck, 4 Jaw Chuck, Magnetic Chuck, Faceplate, 2 Point Steady, 3 Point Steady. For sale with Jet Machinery Ltd Jet Machinery Stock No: 27015 Machine Serial Number: TBC Cost: £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. TECHNICAL DATA • Maximum turning length: 2000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mount: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev, 25 steps • Z-axis feed: 0.044–1.48 mm/rev, 25 steps • Tailstock quill diameter: Ø90 mm • Tailstock taper: MT5 • Tailstock quill travel: 235 mm • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm, 54 ranges • Module threads: 0.25–60 mm, 46 ranges • Whitworth threads: 7/16–80 TPI, 54 ranges • Diametral Pitch threads: 0.88–160 DP, 42 ranges • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3740 × 1140 × 1910 mm • Weight: approx. 3800 kg Fodeyzz Sqjpfx Aikopp STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard • Splash guard • Coolant system • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for machining: • shafts and large cylindrical components, • tapers and stepped parts, • internal and external threads, • repair and maintenance components, • general industrial production work. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.

Condition: used, For sale is a used Aciera F4 precision milling machine from Switzerland. Latest generation. Excellent condition. Fpedpfsy H Iupox Aikjp Travels: X400 Y175 Z450mm Tool holder: ISO 40 Spindle speeds: 50-3400 rpm, stepless Universal milling table Feeds on X and Z axes: 10-600mm/min stepless Rapid traverse on X and Z axes: 1500mm/min Extremely robust and precise toolroom milling machine. Includes several SK40 tools as well as a collet chuck with collet set. Original operating manual included. Weight approx. 950kg.

Condition: like new (used), Year of construction: 2022, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Here’s the very 1st used MACH 845-8T Toolroom VMC to appear on the 2nd hand market! This low hours, highly spec’d and immaculate example is equipped with DynaPath’s Windelta touch screen control has been rented to a FE College and is now availabel for sale...its in as new condition, has an 8,000RPM spindle, 8Gb memory, 1,000 blocks of look ahead and is Wi-Fi enabled for remote support from MACH & DynaPath..(that’s included on this used machine tool ) Taken from MACH Machine Tools marketing material, they say; This small footprint, high build and component part quality toolroom VMC features MACH’s cleverly designed 8 position ATC that’s arrange around the 10,000 RPM spindle, for simple, efficient and quick tool changes. As with all MACH CNC machines, the MDS 845-8T is equipped with DynaPath’s feature packed Windelta control system, with touch screen user interface. The control is capable of accepting multiple programme formats via its inbuilt USB, Ethernet or wireless interfaces. It can be programmed Conversationally, via DXF, in ISO/EIA G-Code formats and has a DFX and DFX program editor in built, making the control capable of accepting and editing programmes in any machine format. As a standard feature its equipped with full Wi-Fi connectivity for remote factory support. It has a huge 8Gb of memory, 1000 blocks of look ahead, for high quality and fast 3D contouring, a solid-state hard drive, Yaskawa digital drives and servo motors and a Delta spindle drive that controls the 10,000 RPM Direct Drive spindle, all mounted in an air-conditioned electrical cabinet. Specified way beyond its price point and backed up by the now legendary, MACH-DynaPath’s worldwide Wi-Fi remote support and team of dedicated engineers. Specification: Travels: X/Y/Z: 800 / 450 / 450 mm Spindle Nose to Table: 90 ~ 537 mm Centre of spindle to column: 435 mm Fpodpfx Aiemmgpdjkep Spindle Taper: BT40 Spindle Max RPM: 8,000 RPM Table Size: 850 x 420 mm T-Slots: 18 x 85 x 4off Max Table Load: 220 kg Max Rapid Rate: 20 m/min Max Cutting Rate: 10 m/min X/Y/Z Axis Type: Linear rail with roller bearings + Ball Screw ATC Type: 8-Tool Independent Arm, arrange around the spindle Max Tool Dia: 63 mm Ø Max Tool Weight: 5 kg Tool Change time: (Tool to Tool) : 2.8 sec Spindle Motor: 5.5 kW (7 HP) / 35 Nm X/Y/Z Servo motor rating: Yaskawa 0.85 / 0.85 / 1.3 kW Positioning Accuracy: 0.005 um Repeatability: ±0.003 um Power requirement: 15 Kva (supplied with 415V-220V 7kVA Transformer for UK) Air requirement: 6 kg/cm3 Footprint: (LxWxH): 2200 x 2539 x 2304 mm Weight: 3750 kg Control System: DynaPath WinDelta with 15" Touchscreen LCD D11 Console, MPG Handwheels, Conversational + DXF + ISO/EIA G-Code UKAS & CE compliant safety modules, interlocks & certification. 415V to 220V 7kVA Supplied with: UKCA/CE safety enclosure, interlocks and electrical equipment, 10,000 RPM BT40 spindle, set of 8 pull studs, through spindle coolant, bed wash, coolant/air gun, swarf augers, LED machine lighting, end of cycle light stack, electrical cabinet air conditioning, MPG, 8Gb of memory, DFX File reader with program editor, 1000 blocks look ahead, Wi-Fi remote support.

Year of construction: 2002, condition: good (used), Heidenhain TNC 124 X-700 mm Y-500 mm Fpedpeinukmjfx Aikep Z-500 mm taper SK40 Spindle speeds 63-3150 rpm Table 900 x 500 mm weight of machine 2500 kg machine checked before delivery spare-parts available

Condition: new, Year of construction: 2026, CORMAK TORNADO 360×1000 VARIO Universal Lathe The CORMAK TORNADO 360×1000 VARIO is a professional conventional lathe designed for precision metalworking in manufacturing plants, toolrooms, and maintenance workshops. Its rigid construction, 1,000 mm distance between centers, powerful 2.4 kW motor, and Camlock D1-5 spindle mounting ensure excellent rigidity, stability, and repeatable machining performance, even during demanding cutting operations. Key Advantages of the CORMAK TORNADO 360×1000 VARIO Universal Lathe 1,000 mm distance between centers enables machining of long shafts, sleeves, and other extended workpieces. Hardened and precision-ground bed (195 mm wide) provides excellent wear resistance and effectively dampens vibrations. 52 mm spindle bore allows machining of larger-diameter bar stock without prior preparation. Camlock D1-5 spindle nose ensures fast, secure, and rigid chuck mounting. 2.4 kW motor delivers high torque at low spindle speeds and reliable performance under load. Variable spindle speed (VARIO) from 75–2,000 RPM allows precise adjustment for different materials and machining operations. Supports both metric and imperial thread cutting, increasing the machine's versatility. Accommodates 16 × 16 mm cutting tools, making it compatible with professional turning tool holders. Rigid Construction for High Machining Accuracy The lathe is built around a heavy-duty cast iron frame whose substantial weight and wide guideways effectively minimize vibration during machining. The hardened and precision-ground bed maintains its geometry even under intensive use, ensuring consistently high machining accuracy and excellent surface finish. The spindle is mounted on precision bearings and features a Camlock D1-5 spindle nose for quick chuck changes and maximum rigidity. Its 52 mm spindle bore enables machining of larger-diameter materials, expanding the machine's application range. Standard Equipment Machine stand 200 mm 3-jaw chuck with internal and external jaws 200 mm 4-jaw independent chuck with internal and external jaws Set of 7 turning tool holders (16 × 16 mm) Faceplate Thread dial indicator Fixed steady rest Follow rest 2-axis SINO digital readout (DRO) Chip tray and integrated tool drawers Coolant system LED work light Technical Specifications Specification Value Swing over bed 360 mm Fodoznt I Ispfx Aikspp Swing over cross slide 225 mm Distance between centers 1,000 mm Bed width 195 mm Maximum tool size 16 × 16 mm Spindle bore 52 mm Spindle taper / spindle nose MT6 / Camlock D1-5 Spindle speed range 75–2,000 RPM (variable) Metric threads 20 ranges, 0.25–5 mm Imperial threads 25 ranges, 4–60 TPI Longitudinal feeds 15 ranges, 0.05–0.5 mm/rev Cross feeds 15 ranges, 0.02–0.2 mm/rev Compound slide travel 95 mm Cross slide travel 180 mm Tailstock quill diameter 32 mm Tailstock taper MT3 Tailstock quill travel 90 mm Motor power 2.4 kW Power supply 400 V Overall dimensions (L × W × H) 1,700 × 850 × 1,600 mm Weight 550 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 274 mm, spindle bore: 82 mm, turning diameter: 460 mm, turning length: 1,500 mm, total length: 2,720 mm, total width: 1,040 mm, total height: 1,340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 2,080 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1500 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 82 mm spindle bore, 5.5 kW main motor and 1500 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Fjdpfx Aie Af Uncekepp Key features • Turning length 1500 mm, spindle bore 82 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Swing over cross slide: 274 mm Swing in gap: 690 mm Maximum turning length: 1500 mm Bed width: 300 mm Spindle nose: D8 Spindle bore: 82 mm Spindle taper: Ø90 (1:20) Spindle speed: 25 – 2000 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Top slide travel: 120 mm Cross slide travel: 290 mm Main motor power: 5.5 kW Coolant pump power: 0.09 kW Dimensions (L × W × H): 2720 × 1040 × 1340 mm Weight: 2080 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: RX7_800074, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, and Z axes, CNC). High-performance production machine with a polymer concrete bed (ANCAcrete), 19kW, 10,000/min spindle, and a dual disc changer for up to eight grinding wheels. PLX tool loader with 2 pallets, latest CNC generation, and the latest ToolRoom RN35 software installed. Optionally available with an extraction system and coolant system. Fodpfx Asw Uf Sgjikjpp !Offer only valid in Europe, Africa, and the Middle East!

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 Fodpfx Aeymdymsikspp - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm Fjdpfowthbisx Aikjpp >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 80 mm, turning diameter: 460 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,080 mm, total height: 1,650 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 1,655 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1000 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 80 mm spindle bore, 5.5 kW main motor and 1000 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1000 mm, spindle bore 80 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Swing over cross slide: 260 mm Swing in gap: 690 mm Maximum turning length: 1000 mm Bed width: 300 mm Spindle nose: D1-8 CAMLOCK Fpjdj Abbgvopfx Aikop Spindle bore: 80 mm Spindle taper: MT7 Spindle speed: 25 – 1700 rpm, 12 speeds Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT4 Top slide travel: 125 mm Cross slide travel: 295 mm Longitudinal travel: 750 mm Maximum length of installed part: 900 mm Main motor power: 5.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2200 × 1080 × 1650 mm Weight: 1655 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4, reducing sleeve MT7/MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Condition: reconditioned (used), functionality: fully functional, The Aciera F3 is a compact, precision bench milling machine renowned for its robust construction and excellent surface finish. Widely used in toolrooms and prototyping workshops, it provides precise control for machining small to medium-sized parts. Fpjdpfxeznh Ehs Aikop

Year of construction: 2023, condition: new, Wagner Turning Systems Helix FG22-S Thread Rolling Head – NEW For sale: a new and unused Wagner Turning Systems Helix FG22-S thread rolling head. Technical information: Manufacturer: Wagner Turning Systems Model: Helix FG22-S Part / catalogue number: 75-1070-000 Condition: New / unused Fedpfe Aifq Nex Aikepp Application: Thread rolling / thread forming Intended use: industrial production, CNC machining, and serial production The tool is designed for professional thread production using the thread rolling / forming process. Thread rolling is a chipless forming process offering high process repeatability, good surface quality, and efficient thread production, particularly in serial manufacturing applications. The unit is new and available immediately. Suitable for: CNC machining companies precision parts manufacturers serial production toolrooms industrial tooling distributors Additional photographs, dimensions, and technical information can be provided upon request. VAT invoice available. Please contact us for further information or to submit an offer.