Used Seed Drill for sale (4,937)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Robust drilling machine featuring a powerful OPTIMUM brushless drive. Key highlight: menu-guided control for operating modes drilling/tapping. - Smooth-running and high-performance brushless drive - Optimal power transmission via aluminium pulleys combined with a toothed GATES quality V-belt - High running smoothness thanks to precision-ground multi-spline drive - Concentricity guaranteed at less than 0.015 mm, measured at the quill - Drilling spindle with precision ball bearings - Membrane keypad; dust- and water-resistant, easy to clean - High-quality OPTIMUM quick-action drill chuck included as standard - Separate emergency stop pushbutton - Precisely machined worktable with diagonal T-slots, 360° rotatable - Integrated coolant channel surrounding the worktable - Large, height-adjustable safety guard with interlock switch for maximum operator protection - Drilling depth stop - V-belt guard with safety switch - V-belt tensioning mechanism - Solid, large base plate with reinforced ribs at the rear Lhjdpfew Rhk Rex Al Ieh Technical specifications: Column diameter: 60 mm Dimensions (LxWxH): approx. 552 x 445 x 850 mm Weight: approx. 64 kg Drilling capacity (steel): 18 mm Continuous drilling capacity (steel): 16 mm Tapping capacity (steel): M10 Table size: 230 x 245 mm Speed range: 100 – 6000 rpm Number of speed ranges: 5 Total power connection: 1.5 kW Mains voltage: 230 V Quill stroke: 65 mm Spindle taper: MT 2 Throat depth: 130 mm Including quick-action drill chuck 1–13 mm Including machine vice BMP 100 Availability: short-term Location: Flörsheim

Condition: used, Display unit Lhedpfxjv Ntb Ij Al Ioh Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: used, Drill sleeve, MK 4 Length 170 mm Diameter 63 mm Lhedpfx Alob Tyqao Ieh

Condition: used, High-speed milling spindle, HENNINGER Type 814 / 5131 / 1:5 / 15000 Maximum speed: 15,000 rpm at 70% duty cycle Gear ratio: 1:5 Power transmission: up to approx. 2.5 kW Overhang: 110 mm (machine spindle to clamping nut) Tool holder: MK4 with M16 draw-in thread Lhodof Axn Uepfx Al Ish Collets, Type OZ16, Ø: 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm Weight: 6.5 kg Good condition.

Condition: excellent (used), 10 x Deep-hole drill bits, manufacturer Botek 3 pieces, 6.5 x 320 mm 2 pieces, 10.2 x 190 mm 3 pieces, 10.4 x 250 mm Lhedpohl Awdsfx Al Ijh 1 piece, 11 x 350 mm 1 piece, 11 x 270 mm Weight: 1.5 kg

Condition: good (used), Reamer, twist drill, drill bit -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm Ledpfsx R Sz Iex Al Ishh -Weight: 8.6 kg

Condition: ready for operation (used), functionality: fully functional, input voltage: 380 V, type of input current: three-phase, spindle mount: MK 4, drilling depth: 150 mm, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 2,400 rpm, rotational speed (min.): 100 rpm, total width: 660 mm, total length: 750 mm, total height: 2,050 mm, table width: 660 mm, table length: 560 mm, 3-phase 380V, 2-speed motor is running smoothly! Geared head with 8 spindle speeds. Gears operate in oil. Spindle RPM adjustable from 100 to 2300. Power feed with 4 feed rates. MT4 spindle mount. Albrecht 1-13mm MT3 drill chuck included. MT3 to MT4 adapter sleeve included. Tool ejector. Emergency stop switch. Runs in both left and right directions. Table dimensions: 660x560mm Maximum drilling depth: 150mm Drilling depth is adjustable. Lhsdpfx Aezfqz Tjl Ioh Head and table are height-adjustable. Good overall condition! Made in Sweden. Overall dimensions: 75x66x205cm Contact us for shipping options! €2,500.00

Condition: good (used), Year of construction: 1990, power: 3 kW (4.08 HP), rotational speed (max.): 1,280 rpm, total width: 2,000 mm, total length: 2,000 mm, total height: 2,300 mm, table width: 400 mm, table length: 1,200 mm, Drilling machine Erlo - TCA 45 BV MACH-ID 9361 Make: Erlo Type: TCA 45 BV Year: 1990 Max. drill Ø steel:45mm Max. drill Ø cast: 50mm Lodpfx Aozcnnajl Ishh Max. tap Ø: 40M Stroke pinole: 280mm Throat: 470mm Spindle Taper: 5ISO/Bt/Mk Speeds / ranges: 1280Rpm Table Length: 1200mm Table Width: 400mm Power: 3kW Length: 2000mm Width: 2000mm Height: 2300mm Weight: 2800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Lhodsvm Akgopfx Al Ijh universal head portable radial

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Ledey D Hr Ujpfx Al Ijhh Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: used, Year of construction: 2000, Boring machine Manufacturer: TOS Type: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Lhjdsx A Ayiopfx Al Ioh Report available Travel distances: X/Y/Z: 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 tons Number of tool positions: 60 Spindle mount: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard completely overhauled with a new wiper. Dimensions: L x W x H approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 tons 24626

Condition: new, Year of construction: 2021, bore capacity in steel (diameter) 30 mm throat 255 mm Ledpfxst Smigs Al Ijhh bore stroke 110 mm spindle turning speed range 80 - 3490 U/min spindle taper MT 4 table surface area 420 x 480 mm base plate 600 x 370 mm Distance spindle/table max. 700 mm distance spindle/base plate 1200 mm voltage 400 V / 50 Hz total power requirement 1,1 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 1,2 x 0,7 x 2,3 m 2-stage motor, 1.1 / 1.9 Kw, drill chuck protection, drill chuck, work table rotatable and tiltable,

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, Ljdpfxsy H Nvbs Al Ijhh • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm Lodpovcrmpefx Al Ishh feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1974, Bohrleistung in Stahl (-Ø 35 mm throat 1000 mm workpiece height max. 200 - 1400 mm height adjustment 745 mm base plate surface area 1200 x 930 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 4 bore spindle stroke 350 mm turning speed range 60 - 1850 U/min Ljdpfetv Igtex Al Ijhh feed range 0,09 - 1 mm/U power capacity 3,7 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Cube table 800 x 800 x 650 mm Coolant device

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW Lhsdetv Iklopfx Al Ioh weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: good (used), DRILLING CAPACITY STEEL E335 (ST 60) [MM]: 14 TAPPING PERFORMANCE STEEL E335 (ST 60) [MM]: M 14 SPINDLE, SHORT: MT 2 DISTANCE SPINDLE TO COLUMN [MM]: 250 TABLE CLAMPING AREA [MM]: 370 x 300 DISTANCE SPINDLE - TABLE MIN./MAX. [MM]: 125 / 455 COLUMN DIAMETER [MM]: 90 Lodoy D Ebnepfx Al Iohh Z-TRAVEL OF SPINDLE [MM]: 100 FEED: manual POWER [KW]: 0.6 / 0.95 POWER 2 [RPM]: 0.6 / 0.95 MOTOR 1 [RPM]: 750 / 1500 MOTOR 2 [RPM]: 750 / 1500 SPINDLE RPM RANGE | OPTION 1 [RPM]: 125 – 2,400 SPINDLE RPM RANGE | OPTION 2 [RPM]: 225 – 4,300

Condition: new, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm Finger milling capacity ----- 32 mm Dimensions of the work table ----- 800 x 240 mm Dimensions of the T-slots ----- 14 mm Spindle mounting ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 degrees Lsdega Tyzepfx Al Iohh Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 RPM Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDED * 3-axis digital readout, brand SINO * Automatic longitudinal feed for the work table * Drill chuck with taper ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Ejector pin * LED work light * Cooling system * Tapping function * Digital depth stop * Milling head with motorized height adjustment * Various tools in a case

Condition: excellent (used), Working travels 450 x 260 x 560 mm Lsdpfxetpgcns Al Ishh Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Ljdpfx Ajuy Sazol Iohh Digital read-out Accessories MARCELS MASCHINEN CH

Condition: used, Type Lhjdpfjzf Nf Dox Al Ieh Laser Processing Head Application: Metal laser cutting Compatible lasers: Fiber-laser, diode-laser, disk-laser Wavelength: ~970 - 1070 nm (1 µm lasers) Max. laser power: 12 KW Focus control: Automatic control of focus position and focus diameter Focal distance: ±50 - 120 mm Z-adjustment range: ±40 mm Spot size: approximately 120 - 320 µm (depending on fiber and lens) Fiber core: e.g. 100 µm fiber possible Typical material thickness: up to ±25 mm Online auction of overhead cranes, gantry cranes, welding equipment and industrial handling assets, all originating from KSK GmbH in Schwerte, Germany. For sale (e.g. 2 KONE CXTD 16T overhead cranes (2012), 1 KONE 15T overhead crane (2009), 2 DEMAG 10T overhead cranes (1997), 1 Dieter Seifert 5T overhead crane (1991), 1 Giromatic GRMM-10-450 welding positioner / rotation system with twin rollers (2018), 1 Fronius TPS 500i digital inverter MIG/MAG welding machine (2025, unused), 1 ESAB automatic welding installation for long weld seams (2004), 2 KONE mobile gantry cranes (2012), 1 Scheffer ELV 5T mobile hall gantry crane (2004), 1 Atlas Copco GA11+FF screw compressor with integrated dryer (2012), 1 ESAB Centrovac WS 40-20 K industrial central fume extraction unit, 3 heavy duty double-sided cantilever rack systems (2018), 2 Globus jib cranes, various heavy duty clamping tables, transport frames, pallet racking and supporting workshop equipment). The online auction opens Thursday 28 May and closes Tuesday 30 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 26 June Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), number of spindles 2 bore capacity in steel (diameter) 28 / 32 mm bore stroke 180 mm spindle turning speed - stepless 110 - 1450 U/min weight of the machine ca. 1,1 t Ljdpfxozd Hg Nj Al Ijhh dimensions of the machine ca. 1,3 x 1,0 x 2,0 m

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed. Lsdpfszd Hgpsx Al Iehh

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Lodpfx Alswcldao Ijhh Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: reconditioned (used), Year of construction: 2003, Drilling machine for Newel Posts. Lhodpfxog U U D Rj Al Ioh Without adjusting the machine your can drill 2 Newel Posts for mounting one Newel Post up on the other with dowel connection. The renovation of the machine is still going on.