Used Seed Drill for sale (4,985)

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 9 drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Quantity: 2 pieces available Tedpfx Aceb A R R Ts Tjb -Price: per piece -Dimensions: 310/60/H135 mm -Weight: 8 kg

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit Tsdpob A Sm Aofx Ac Tob -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: - Drilling capacity in steel 28 mm Tedob Ennkjpfx Ac Teb - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Condition: good (used), End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm Tjdpfob A I Rbjx Ac Teb -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head Tsdob A I Ulspfx Ac Tsb -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece -Weight: 2 kg/piece

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Solid, column drill type SHW 30 Tsdpfx Ajqxvxlec Tob -Motor power: 1.1 kW -Speed speeds: 70 - 1980 rpm, 7 levels -Table size: 270 x 270 mm, travel 630 mm -Clamping table: pivotable on vice device -Spindle holder: MK3 with drill chuck -Spindle stroke: 120 mm -Throat: 280 mm -Column Ø: 110 mm -Accessories: including foot control -Dimensions: 860/640/H1850 mm -Weight: 273 kg

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc Tedpjqzl Hiefx Ac Tjb -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear Tsdpfxjt Etiyo Ac Tjb - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Drill chuck, collet chuck, keyless drill chuck -Manufacturer: Ewe, drill chuck keyless drill chuck SK40 -Type: 802 531 -Clamping range: 1-13 mm -Number; 2x drill chuck available Tsdpfx Acet Had Hj Tsb -Price per piece -Dimensions: Ø 63 x 180 mm -Weight: 1.2 kg/St.

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Tedpfx Aot Hxa Hoc Tsb Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m Todpfx Acet H Smys Teb

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW - Height-adjustable drilling table: 280 x 240 mm Todpfx Acjkt N Nlj Teb - Distance drill spindle / table: approx. 360 mm - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling Tsdpfx Aoir E Syec Tjb -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, OFFER Technical data: - Drilling capacity in steel ST 60: 28 mm Tsdpfx Aohglvksc Tsb - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3, long spindle - Drill spindle stroke: 180 mm - Drill spindle speeds, stepless: approx. 140 - 1600 rpm - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Overhang: 290 mm - Max. distance, table to drill spindle: 620 mm - Rotary table with 2 T-slots: 450 mm - Height adjustable via rack and pinion with hand crank - Coolant system - Drive: 380 V / 0.9 / 1.3 kW - Space requirement: approx. W 750 x H 1900 x D 700 mm - Weight: approx. 280 kg

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg Tedpfsmzkg Rjx Ac Teb

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm Tjdpfx Aew En D Ijc Tsb throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Description to follow!

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: Todpsw E H E Refx Ac Tjb - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: good (used), Reamer, twist drill, drill bit Tsdpfx Aeu Tlhioc Teb -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

Condition: refurbished (used), Numerical Control Type Power Control Software No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 2 Drilling heads for each horizontal unit (1 x Kw 1,5) No. 11 Splindles for each horizontal drilling head Todpfxjvhcbzs Ac Tsb Max. working width (mm) 3000 Min. working width (mm) 250 No. 6 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the top vertical supports No. 6 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 50 / 60 (ca.)

Condition: good (used), Spotlight drilling machine Drilling device Todjvdc T Nopfx Ac Teb For drilling lighting holes, cable apertures, spotlight holes in wall cabinets, display cabinets and carcasses Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW Tsdsu Nm Niepfx Ac Tjb

Condition: used, Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg Tsdpfxsut Uzao Ac Tob - various guide cartridges

Condition: used, drill chuck, collet chuck, keyless drill chuck -Manufacturer: Albrecht, drill chuck keyless drill chuck MK3 -Clamping range: 3-16 mm / 1/8-5/8" -Number; 1x drill chuck available Tsdjux Sbvepfx Ac Tob -Dimensions: Ø 56 x 210 mm -Weight: 1.5 kg

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Tsdpfx Aewuclroc Tjb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures Tsdewh Rp Eopfx Ac Tjb - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.