Used Directional Drilling for sale (8,691)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Gbjdpfx Aijzumt Rsveu Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: new, Year of construction: 2026, functionality: fully functional, Alignment press system Push and pull force 24/30 t Hydraulic station 50 m rod Gbodpfouy N H Esx Aiveu Expander 80/132/160/200 mm Without locator device Price: €27,000.00 net Dry drilling: no bentonite use, no bentonite disposal

Condition: used, Year of construction: 2011, working width: 1,300 mm, workpiece height (max.): 50 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum workpiece thickness: 50 mm Number of working areas: 2 Number of controlled axes: 3 Drilling units Number of drilling units: 4 Drilling unit 1: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Gbedpfx Ajz Ekggsivju Drilling unit 2: Top Vertical drilling spindles: 51 Horizontal drilling spindles in X-direction: 4 Drilling unit 3: Bottom Horizontal drilling spindles in Y-direction: 42 Drilling unit 4: Bottom Horizontal drilling spindles in Y-direction: 42 Milling units Number of milling units: 2 Milling unit 1: Top Controlled axes: 3 Motor power: 6.6 kW Milling unit 2: Top Controlled axes: 3 Motor power: 6.6 kW Sawing units Number of sawing units: 2 Sawing unit 1: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm Sawing unit 2: Top Design: Fixed unit for grooving in X-direction Maximum tool diameter: 125 mm EQUIPMENT Albatros machine programming software Collets for workpiece clamping The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5446

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. Gbedpfezk Nuiex Aivou - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW Godpfxszn Ah Rs Aivsbu - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Gbodjz I Ub Hjpfx Aivsu Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm Gedpofmdcqjfx Aivsbu The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Gbodpovvi I Rjfx Aivsu

Condition: new, bore capacity in steel (diameter) 30 mm Godpfx Aieun Um Eevobu throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice Gbodpeq Nrmrsfx Aivsu

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping Gbjdpfjz I Tahjx Aivou • Infeed and outfeed roller conveyors, total length approx. 14 m • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Gbsdpjz Iz Sfjfx Aiveu Air requirement: 4.1–7 bar

Condition: good (used), Year of construction: 2005, machine/vehicle number: PRJ035402, functionality: fully functional, spindle mount: MK 4, total width: 450 mm, total length: 720 mm, total height: 1,861 mm, table width: 370 mm, table length: 500 mm, overall weight: 510 kg, We offer this well-maintained ALZMETALL AB 40/SV pillar drilling machine, manufactured in 2005. Manufacturer: ALZMETALL Model: AB 40/SV Year of manufacture: 2005 Condition: good Serial number: PRJ035402 Drilling capacity in steel St60: D40 mm Drive: Continuously variable with a 2-speed gearbox Spindle speed: 70-4000 rpm Tool holder, short spindle: MK4 Overhang: 300 mm Column diameter: 145 mm Spindle stroke: 160 mm Feeds: 0.1/0.2/0.3/0.4 mm/rev Table clamping surface: 500 x 370 mm Max. table load: 160 kg Distance spindle-table min/max: 147/688 mm Distance spindle-base plate (top edge): 1162 mm Distance spindle-base plate (bottom edge): 1267 mm Base plate (unmachined): 720 x 450 mm Machine height: 1861 mm Weight approx.: 510 kg Space requirement approx. (L x W): 720 x 450 mm Technical data without guarantee. Errors and prior sale reserved. Gjdpfxoz Nd Sls Aivjbu

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg Godpfx Aiszypgdsvebu The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy This lot has been professionally dismantled. Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gedpoz Arylsfx Aivobu

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 Gbjdpez Hd Tpefx Aivju 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: used, Workbench Drilling Machine GUILLARDON GT 16 Cone: CM2 Spindle exit: 150 mm Rotation: from 150 to 3000 RPM Table size: 400 x 400 mm Rotation right / left Throat depth: 280 mm Spindle diameter: Ø 60 mm Column diameter: Ø 105 mm 2 speeds motor Speed variation by belt drive Non-functional electronic drive Manual Descent Maxi height mandrel/table: 450 mm Mini height mandrel/table: 150 mm Sold with the table Voltage: 380 V Gjdpfx Aijz I Diaovsbu Width: 500 mm Depth: 900 mm Total height on the table in high position: 2100 mm Total height on the table in a low position: 1700 mm Weight: approx 350 kg

Condition: used, machine/vehicle number: 008781, Position 1: Automated Warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 2: Beam panel saws with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Position 3: CNC machine centres with automatic warehouse IMA-CUTTING,EDIGING,DRILLING LINE Gjdpfx Aez Nx Hksivebu Position 4: edge bander batch 1 IMA-CUTTING,EDIGING,DRILLING LINE Position 5: CNC for Flexible Drilling IMA-CUTTING,EDIGING,DRILLING LINE Position 6: Robot IMA-CUTTING,EDIGING,DRILLING LINE

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Radial drilling machine TOA Type TRD 1000 F Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Taper shank MK 4 Spindle speeds 50 – 1230 rpm Godpfxsz I Nkve Aivobu Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Condition: good (used), power: 1.1 kW (1.50 HP), overall weight: 200 kg, Prebomat, drilling head for fitting operations, with 7 spindles, in very good condition. Gbedpfxoz N T Uio Aivsu

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine Robust and reliable radial drilling machine from the reputable manufacturer “Csepel”, model RF50/1250. This machine is characterized by its solid construction and is ideal for workshops, metalworking shops, or demanding DIY enthusiasts. Technical specifications (according to the nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Godpfx Aiozninwsvsbu Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse rating: 16 A, slow-blow You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Gjdpfx Ajzrnndjivsbu Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Gedpfsz Nxnhox Aivebu Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: good (used), functionality: fully functional, Gillardon GB30 pillar drilling machine Speed range: 60-1600 rpm Spindle taper: MK3 Overhang: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Drill spindle stroke: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970mm Weight approx. 400 kg Gbedpfez Ngr Isx Aivsu

Condition: good (used), Alzmetall AC 32 Turret Double-Head Drilling Machine An extremely robust and rare double-head drilling machine based on two Alzmetall AC 32 drilling head units. This machine is a high-quality industrial design intended for highly efficient series or multi-stage machining. Instead of simple spindles, this machine is equipped with two separate tool turrets. This enables fully automatic machining cycles (e.g., centering, drilling, countersinking, threading) without the need for manual tool changes. Gbedpfjznic Uex Aivju Technical data & equipment (per head / overall machine): Manufacturer of drilling head units: Alzmetall (Germany) Model: AC 32 (Electronically controlled with digital display) Drilling capacity: max. 32 mm in steel Threading capacity: max. M 24 / M 30 Tool changer: 2 x pivoting turrets with multiple stations Machine table: Solid, ground cast iron table with T-slots for flexible setup Safety: Complete enclosure of the working area (protective cabin) with viewing windows for optimal chip and splash protection Additional functions: Integrated coolant system, compressed air blow-off gun, central counterweight system for easy vertical adjustment of the entire beam More items – new and used – can be found in our shop! International shipping costs on request!