Used Drilling for sale (4,846)

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, clamping length: 3,200 mm, pipe diameter (max.): 30 mm, HEBÖ RBV 12 Pipe Drilling Machine - Through-hole diameter of the chuck: 30 mm Ksdpfsz Spx Aex Aamjnc FCA D-35614 Aßlar - loaded onto a truck.

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and versatile use through pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1 - 20mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel drilling on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then done pneumatically from the front. Cross adjustment: 430mm, stepless or in a 12mm grid. Maximum height adjustment: approx. 100mm above the table height. Drilling stroke: approx. 150mm. 2 pneumatic workpiece clamps. Grid rail for quick adjustment on the side in a 12mm grid. Stop for length adjustment during elongated hole milling. 2 swiveling workpiece supports. Special stop system, approx. 3.1m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, mullions, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few paint spots have been touched up. Almost new condition, see original photos. Dimensions: approx. 1500 x 900 x 1400mm (L x W x H), weight 300kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller". Knodpfx As Aa A Eqoamoc

Condition: ready for operation (used), type of input current: three-phase, spindle mount: MK 4, total width: 920 mm, total length: 2,310 mm, total height: 2,590 mm, overall weight: 3,962 kg, Kitchen and Walker Radial Drill Model: E2 5’-0” Spindle Taper: No 4 Morse Spindle Speeds: 25-1560 RPM Knsdpfx Aez S Nndeamjc Radius Of Spindle: Max: 1575mm Min: 430mm Traverse Along Arm: 1170mm Spindle To Base Plate: Max: 1257mm Min: 152mm Machine With: Coolant and Fittings Safety Brake Box Table Ammeter Dimensions: 2310 x 940 x 2590mm Weight: 3962 Kgs

Condition: ready for operation (used), functionality: fully functional, Outrigger drilling machine UCIMU RP 1580 MP -Outrigger arm approx. 2000mm -Speed range (gearbox) 30 - 1200 rpm -Automatic feed -Drilling table 1300x650x700mm -Morse taper MK 5 -Electrical safety device -Coolant system Knedpsz S Nb Dsfx Aamjc -Work light -Quick-change tool holder & adapter mounts Dimensions: L x W x H 2.5 x 1 x 2.85 meters / Weight 4500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total length: 14,000 mm, Equipment: documentation/manual, Alzmetall AB 26 drilling line with MKH CNC positioning and roller conveyors (2006) For sale: complete drilling line for profiles and strips, built around an Alzmetall AB 26 column drilling machine with an MKH CNC positioning system. The machine has been used in our production and is being sold due to workshop restructuring. Specifications: • Column drilling machine: Alzmetall AB 26, manufactured in 2006 • Digital display of spindle speed and drilling depth • Automatic spindle feed with depth adjustment • Coolant lubrication system • MKH CNC control with positioning carriage and gripper on guide rail • Pneumatic work piece clamping • Infeed and outfeed roller conveyors, total length approx. 14 m Kedez I Tahspfx Aamenc • Separate control cabinet with emergency stop and main switch • Connection values: 400V / compressed air 6-10 bar Condition: operational, can be demonstrated while running. Manual available. Location: Waalwijk, Netherlands Availability: immediate / by arrangement Dismantling and loading: [by arrangement / buyer arranges transport / we assist with loading] Price: € 9,000 excl. VAT Inspection by appointment is possible.

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 2.25 kW (3.06 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: AC, tool diameter: 40 mm, spindle mount: MK 4, drilling depth: 130 mm, actuation type: manual, rotational speed (max.): 2,380 rpm, rotational speed (min.): 65 rpm, total width: 685 mm, total length: 1,030 mm, total height: 1,900 mm, throat depth: 300 mm, table width: 600 mm, table length: 460 mm, overall weight: 410 kg, Equipment: documentation/manual, rotational speed infinitely variable, Column drilling machine SerrMac TCO 40L - Year of manufacture: 1999 - Good condition considering its age - Work table: 600 (width) x 460 (depth) mm - Motor: 2.25 kW - Spindle speed: 65 – 2,380 rpm – 2 speeds via gearbox, infinitely variable within each speed - Mechanical drill drive with feed rate adjustment possible - Thread cutting device - LED table lighting (retrofitted) - Sturdy machine with a robust column - Weight: 410 kg Ksdpfx Aaoz Ailrjmjnc - Fully functional - Tool holder, clamping devices, and a vise can be purchased separately, depending on the pricing - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. Sale is only to commercial customers after inspection and acceptance on-site. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) - no shipping.

Condition: used, total width: 1,100 mm, total length: 1,700 mm, total height: 1,150 mm, Year of manufacture: 1998 Colour: White Empty weight: 1.100 kg - Year: 1998 - CE marking present: Yes - Serial number: 980223 - Table length [mm]: 245 - Table width [mm]: 735 - Number of spindles [pcs]: 8 - Spindle diameter [mm]: 16 - Max. spindle speed [rpm]: 17000 - Distance between spindles [mm]: 50 - Workpiece clamps [pcs]: 2 - Workpiece support/Guide: Table - Drills included: Yes Knodpfxozvx N He Aamsc - Voltage [V]: 415 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 1700mm x 1100mm x 1150mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, serial number 2934 weight 709 kg Ksdpfxeztfyts Aamjnc feed ja m/min taper MK 3

Condition: ready for operation (used), Year of construction: 1985, Available for immediate pickup at our location: Radial drilling machine TOA Type TRD 1000 F Year of manufacture 1985 Outreach 1000 mm Installation height 800 mm Taper shank MK 4 Spindle speeds 50 – 1230 rpm Ksdps Aa Inwjfx Aamsnc Drive power 4 kW Rotary table Vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy Ksdpoz Aryljfx Aamenc This lot has been professionally dismantled. Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1975, functionality: fully functional, 1 x Column drilling machine Alzmetall AB 35 S Year of manufacture: 1975 In good condition. Features: Knedpfe Abam Ijx Aamjc Spindle mount: MK 4 Spindle speeds: 65 - 1,750 rpm Adjustable in two gear stages / stepless Feed rate: 0.1 / 0.2 / 0.3 mm/rev Table diameter: 450 mm Coolant system Accessories: 1 x Drill chuck 1 - 16 mm 1 x Drill chuck Röhm 100 mm The machine can be inspected at our warehouse while powered on.

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive Knjdpfx Aasz R Dt Eemjc - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2000, Donau Danuflex 145 Donau Danuflex 145 high-speed radial drilling machine, year of manufacture 2000, in SUPER condition CE compliant!! Technical data: Year of manufacture: 2000 Drilling and threading capabilities Drilling capacity in steel: approx. 42 to 45 mm Threading: up to M36 Tool holder / spindle: MK 4 Spindle speed: 15 to 2,800 rpm (infinitely variable) [1, 2, 3] Travel distances & work area Outrigger travel: 1,050 mm Drilling radius: min. 540 mm / max. 1,590 mm Quill stroke: approx. 200 to 220 mm Column stroke (W-axis): approx. 450 mm Column diameter: 195 mm Table & dimensions Work table: typically approx. 1,200 x 750 mm with 5 T-slots Work table height: approx. 905 mm (ergonomic design for standing operation) Feed: automatic / stepless quill feed with electromagnetic feed clutch Equipment (standard): Threading device, hydraulic clamping for outrigger and lifting column, central lubrication and machine light Accessories and equipment: Several work tables About the machine: Kedpfx Aaoz Rwpyomjnc Offered is a Donau Danuflex 145 high-speed radial drilling machine. This high-speed radial drilling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Up to 3 fixed machining stations ensure maximum flexibility in the machining of workpieces, both large and small, as well as very long parts. Swivel tables allow the machining of angled bores. Large travel distances and workpiece heights up to 1500 mm are ensured. Effortless, simultaneous positioning to a drilling position in 3 axes. A self-centering spindle head positions itself precisely in centering bores. Concentric countersinking is achieved by self-centering countersinks in the bore. The guides are regularly lubricated by the central lubrication system. The Donau has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Donau on site under power. You can find more drilling machines from well-known manufacturers on our website.

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) Ksdpfx Ajzwc Sbjamonc - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 Knedpfoz Hd Tpox Aamoc 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Kedpfx Aaetwzk Djmjnc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, spindle speed (max.): 10,000 rpm, overall weight: 750 kg, Aciera multi-spindle drilling machine, 4x Type Aciera 13 consisting of: 3x drilling machines 1x tapping machine mounted on a common base. Drilling head adjustable in height. No. 1 + 2 with drill chuck taper No. 3 with quill MK2 No. 4 with drill chuck taper/tapping attachment Max. distance table to drill chuck: 340/530/450/320mm Spindle stroke 120mm Adjustable depth stop, with vernier scale 0.1mm Kodpfez S U E Iex Aamsnc Integrated machine light Overhang 200mm Table size: 360x1120mm 1x T-slot 10mm Speed range machine-dependent 175 - 10,000 rpm Overall dimensions: 1200x800x1760mm Weight approx. 750kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Ksdpfxezrnnds Aamjnc Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: good (used), Manufacturer: WMW Saalfeld Year of manufacture: 1958 Machine number: 6030-33/58 Ksdpfx Aaoz Tc Ruomsnc Type: BKR 4 - 25 Number of drilling heads: 3 Spindle mount: MK 4 Speed range: 63 to 1,000 rpm Feed rate: 0.08 to 1.25 mm/rev Stroke: 200 mm Overhang: 325 mm Table: 2,100 x 600 mm Clamping area: 1,900 x 400 mm Height adjustment of the heads: 300 mm Total power consumption: 8.9 kW Accessories/equipment: Condition: good Weight: 3 t Footprint: 1,750 x 850 mm Dimensions: 2,100 x 900 x 2,500 mm

Condition: used, operating hours: 6,302 h, machine/vehicle number: LLA01169, fuel type: diesel, motor manufacturer: Caterpillar 3512C, General information Year of manufacture: 2008 Field of application: Construction Weights Empty weight: 43.000 kg Functional Generator capacity: 1.421 kVA Dimensions of cargo space: 1310 x 300 x 326 cm Other information Fuel consumption: 205 Liter per Hour at 75% Load Generator: Kato Engineering Frequency: 60 Voltage: 600 Drill equipment: Control Panel, Steel canopy Production country: US Additional information Please contact Team DPX for more information = Additional options and accessories = Kedpfo Aa H Agex Aamsnc - Control Panel - Steel canopy

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kjdpezry H Ssfx Aamonc Lukas van Rossum

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Ksdpezhx D Ujfx Aamsnc Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Year of manufacture: 1997 Empty weight: 200 kg - Year: 1997 - Power [kW]: 1.1 - Table length [mm]: 290 Kjdpfx Aaezry Ntsmjnc - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1969, functionality: fully functional, overall weight: 5,500 kg, arm length 1600 mm Kjdpfxex H Txtj Aamonc taper MK 5 Würfel

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowelling and picket drilling can be easily realized thanks to the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowelling on two levels without adjustment The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then carried out pneumatically from the front Cross adjustment approx. 320mm, stepless or in a 12mm grid Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, can be placed at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Chassis Dust extraction connection 80mm 4 used but good drill bits 9, 12, 16, 19mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is very rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200mm (L x W x H), weight 310kg. Kjdpfx Aasyfta Temjnc The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this seller".