Used Sanders for sale (1,651)

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes Djdpfewqdbmex Ai Asck No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Dcodpfx Aijwvq E As Ask Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Djdpfx Aisy Nktme Ajck No. Operating units: 2 Nr

Condition: used, machine/vehicle number: 008400, Max. machining width: 1350 mm Working Table: Fixed pass height Djdpeywafbsfx Ai Ajck No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Dsdpfx Aiex A Tage Aeck Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Dcsdpfxjxqggce Ai Ask Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago Dcodjudxchepfx Ai Ajk MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW Dsdpfxotwzyfo Ai Ajck 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, edge sanding machine - made in AUSTRIA motor 2,2 kW, 400 V, 50 Hz oszillation 0,18 kW, 400 V, 50 Hz sanding belt length 3000 mm Dodpfx Ais Dxrgo Ajck sanding belt width 200 mm work table seize 1000/ 300 mm weight 300 kg roller DM 120 mm sanding roller DM, exchangeable 65/ 115 mm small sanding table for round sanding 350/ 250 mm mitre fence suction DM 140 mm

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! Dcodpfxov D H Sis Ai Ask • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: AB00021322, total width: 1,820 mm, total height: 1,960 mm, total length: 1,650 mm, working width: 1,100 mm, overall weight: 1,160 kg, power: 11 kW (14.96 HP), grinding belt length: 1,900 mm, workpiece height (max.): 170 mm, grinding belt width: 1,115 mm, input voltage: 400 V, - The calibrating and fine sanding machine LIBRA 35 is an extremely versatile machine suitable for a wide range of applications. - Robust, tube-reinforced monoblock steel frame with high-mounted working units for maximum rigidity. - User-friendly due to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start-up for the main motor. - Natural rubber feed belt with negative profile. - Feed table with two rollers at the infeed and outfeed of the feed belt. - Belt feed driven by geared motor with two speeds. - Flexible steel pressure bar before the first unit. - Rubber pressure rollers before and after each working unit. Dcedjwwkuyspfx Ai Ajk - Pneumatic belt tensioning per unit with decimal correction option for grit/band thickness.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sander (wet-type) equipped with 2 top-mounted sanding units and a brush unit (Scotch-Brite). The machine is used for surface processing of metal parts up to 450 mm wide. The dust collection container with filter fleece is located underneath. Dodpfxeyn E H Rj Ai Aeck The machine is in good, partially overhauled condition. Further technical information can be found in the documentation.

Condition: good (used), functionality: fully functional, 18.5 kW; Metal shaft. Please send an inquiry if you would like to see a work video. Dcsdjzqv Ipopfx Ai Aok

Condition: used, Year of construction: 2007, functionality: fully functional, On offer: JET DDS-225 cylindrical grinder – 2 rollers, working width 650 mm The machine is used, has undergone a technical inspection, is in full working order and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its two grinding rollers with a diameter of 150 mm and a length of 690 mm, enabling efficient material grinding in a single pass. Adjustment of the second roller and two feed speed ranges allow the operating parameters to be adapted to the type of workpiece and the desired finishing effect. Specifications: • Manufacturer: JET • Model: DDS-225 • Year of manufacture: February 2007 • Maximum working width: 650 mm • Maximum working height: 200 mm • Number of grinding rollers: 2 • Diameter of grinding rollers: 150 mm • Length of grinding rollers: 690 mm • Second grinding roller with adjustable function • Main motor power: 3.7 kW • Feed motor power: 1.9 kW • Total power: 5.6 kW • Conveyor feed speed: 2 ranges • Manual conveyor height adjustment • Working table length: 970 mm • Working table width: 670 mm • Dust extraction port: Ø120 mm • Weight: 332 kg • Overall dimensions without dust extraction hood: 110 × 114 × 103 cm (L × W × H) • Overall dimensions with dust extraction hood: 110 × 114 × 145 cm (L × W × H) Applications: • Grinding solid wood components • Grinding panels and bonded components • Leveling the surface of the workpiece • Intermediate grinding • Surface preparation for painting, oiling or further processing • Processing components with a width of up to 650 mm and a height of up to 200 mm Dedpfx Aiezq R U De Aeck Additional information: • The photos show the actual condition of the machine on offer • Free machine operation training at our company's premises • The price stated in the auction applies to export/intra-Community sales with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The delivery cost depends on the destination and the method of machine transport MDD wood machinery is a company specializing in the sale and servicing of used woodworking machines. We offer professional advice, technical inspections, repairs and machine preparation for operation. We support customers both before and during the subsequent operation of the device. We regularly update our offer. If you are looking for a machine that we do not currently have in stock, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco and many others. Contact us for more information, to arrange a machine demonstration and to find out the transport cost. MDD wood machinery – sales and service of machines for the wood industry.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: VG033-25dv, grinding width: 600 mm, grinding height: 530 mm, New, unused SAND1 beam sanding machine, available due to a change in company policy; it was never unpacked. Ideal for sanding beams with a cross-section of up to 600 x 530 mm. Provides a perfect finish. Capable of sanding unplaned wood. Sands on the lower surface. Top belt with pneumatic lift and automatic centering according to the size of the piece. At the base, a series of free-rotating rubber rollers to prevent damage to the wood surface. The machine can be operated in both directions, eliminating the need to flip the beam; simply lay the beam down. Top belt with pneumatic lift and automatic centering according to the size of the piece. LOWER SANDING UNIT Cushioned, suitable for beams, with a belt length of 1,900 mm. Dcodjzh Hr Tspfx Ai Ajk The pad is equipped with a timed inlet controlled by a PLC. High-power motor (11 kW) with fixed speeds and oscillation of the sanding belts. 2 suction ports, 120 mm in diameter. ELECTRICAL CABINET integrated into the machine frame. All components are of the highest quality and supplied by international companies to ensure easy availability in the market. CONTROL PANEL equipped with a 7.5" TOUCHSCREEN programmer for managing all machine functions. Technical specifications are provided in the attached PDF. Includes 4 roller conveyors, 3 x 0.6 meters.

Condition: excellent (used), Sandingmaster 2000 - Feed rate: 4–16 m/min - 16 kW - Sanding width: 900 mm - Year of manufacture: 1995 - Dimensions: 1800 x 1800 x 2300 mm Dcodpoy R U D Eofx Ai Aok Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: excellent (used), CATALOG NUMBER 7037 TECHNICAL DATA - Workpiece length: 2780 mm - Workpiece width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Fan - Forward/reverse rotation - Electrical table height adjustment (up/down) - Extraction port diameter: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm - Weight: 502 kg ADVANTAGES – Not repainted – With fan – Electric table adjustment – Used sander, very good condition Dsdpfjzfpr Rox Ai Asck Net price: 9500 PLN Net price: 2260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER: 6145 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 140mm Djdpozfpq Hjfx Ai Aock 3 units: 1) grooved rubber roller for calibrating, 15kW 2) grooved rubber roller for calibrating, 11kW 3) grooved rubber roller for calibrating, 11kW Top: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller Bottom: - feeding table, 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - conveyor belt - 3 sliding rubber rollers, guiding - pneumatic belt oscillation with photoelectric sensors - belt blowing - electric table lifting - lifting motor 0.75kW - stepless feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8 bar - extraction nozzle diameter 3x150, 3x200mm - overall machine dimensions (L/W/H): 3400x2300x2800mm - feeder dimensions (L/W/H): 3000x1300x900mm - pump dimensions (L/W/H): 600x950x940mm - weight approx. 5000kg Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dcodpfx Aiex A Unxj Ajk Dimensions: 1500x1300x2050 mm (H) Weight: 1200 kg

Condition: used, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood as well as other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. The robust construction and high-quality Italian workmanship ensure long service life and reliable performance even under demanding conditions. The machine features chain feed with stepless speed control from 4 to 20 m/min, pneumatic belt tensioning, and an oscillation system for even abrasive utilization. Precise adjustment of the pressure shoe allows for both fine contour sanding and precise calibration. Technical Data Sanding Belt Belt size: 2450 × 80 mm Dcodpfxexlqute Ai Ask Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding Disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling Unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Spindle diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed System Type: Chain drive with rubber inserts Feed speed: 4–20 m/min (infinitely variable) Dimensions and Weight (LS 1N model) Length: 2450 mm Height: 1400 mm Depth: 1900 mm

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. - 1500/3000rpm. - 380V. Dcjdpfx Aev T Tq Rji Ajk

Condition: excellent (used), Catalog number 7431 TECHNICAL DATA - max. width of the workpiece: 950 mm - max. height of the workpiece: 150 mm From above: - metal roller, pressure roller - unit (fluted rubber roller for calibrating + shoe + metal roller) - metal roller, smooth, sliding roller From below: - conveyor belt - pneumatic belt oscillation with photocells - electric table lifting - 2 types of feed speed - main motor: 7.5 kW - feed motor: 0.6 kW - table lifting motor: 0.18 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 150 mm - dimensions (L/W/H): 1600x1250x2000 mm Dodpfxozdzi Ee Ai Ajck - weight: 1109 kg ADVANTAGES - German production - additional shoe included - used grinder, very good condition Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, functionality: fully functional, On offer: SAMCO Unilev 150 edge sander – double-sided, working height 150 mm. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its double-sided design, which allows for the use of both sides of the sanding belt. The adjustable platen, two belt speed ranges, and tilting worktable enable sanding of straight edges, angled components, veneered components, and internal curves. Specifications: • Manufacturer: SAMCO • Model: Unilev 150 • Working height: 150 mm • Sanding belt dimensions: 150 × 2150 mm • Sanding belt speed: 2 ranges • Number of worktables: 2 • Worktable dimensions: 220 × 1440 mm • One worktable adjustable at an angle from 0–30° • Motor power: 3.5/4.5 HP • Pneumatic belt tensioning and oscillation • Adjustable platen for precise sanding, including veneered components • Fixed opposing belt pressure surface: 150 × 750 mm • Attachment with protractor for angled sanding • Additional table with roller for sanding internal curves • Dust extraction port: Ø140 mm • Weight: approximately 450 kg • Overall dimensions: 144 × 72 × 133 cm (L × W × H) Applications: • Sanding straight edges of solid wood components Dodpfx Aozqan Tei Ajck • Sanding edges of glued components and boards • Precise sanding of veneered components • Sanding edges at an angle • Sanding curves and internal profiles • Preparing edges for painting, oiling, or further processing Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-Community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using our MDD fleet or through external carriers • We assist in obtaining leasing or hire purchase financing • The delivery cost depends on the destination and the method of machine transport MDD maszyny do drewna is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the machine's subsequent use. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and import it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to arrange a machine demonstration, and to find out the transport costs. MDD maszyny do drewna – sales and service of machines for the woodworking industry.

Condition: new, Year of construction: 2026, The professional cast-iron belt–disc sander CORMAK BDS6x10 is a versatile workshop machine that ensures precise and stable machining of wood and plastics thanks to the combination of belt sanding and disc sanding functions. Main Advantages Two functions in one – a belt sander and a disc sander with the possibility of operating the belt both vertically and horizontally, maximizing application flexibility. Higher efficiency – the 750 W (S1) motor provides increased torque and constant rotational speed (2980 rpm). Enlarged working surfaces – a larger sanding disc (254 mm) and a wider belt (1219 × 150 mm) for more efficient processing of large workpieces. Precise angle machining – an adjustable work table (332 × 170 mm) with a miter gauge enables accurate sanding at a 45° angle. Stability and durability – the base made of grey cast iron suppresses vibrations, ensuring maximum precision and long machine life. Efficient dust extraction – a 50 mm extraction port allows effective connection to an external dust collection system. Construction and Operating Parameters The BDS 6x10 belt–disc sander is built on an exceptionally rigid and stable grey cast-iron base, which minimizes vibrations generated during intensive operation. The 332 × 170 mm work table is designed for stable guidance of the workpiece and includes… Technical Specifications Motor power: 750 W Voltage: 230 V / 50 Hz Rotational speed: 2980 rpm Cable length: 1.8 m Table dimensions: 332 × 170 mm Dust extraction port: 50 mm Belt dimensions: 1219 × 150 mm Belt speed: 8 m/s Sanding disc diameter: 254 mm Sound power level: 93.3 dB(A) Sound pressure level: 80.3 dB(A) Gross weight: 41 kg Dsdexy Hrqjpfx Ai Asck Package dimensions: 495 × 760 × 470 mm

Condition: new, Year of construction: 2026, CORMAK BDS 6x9 Wood Sander – Versatile Belt and Disc Sander for Precision Woodworking The CORMAK BDS 6x9 wood sander is a versatile workshop machine combining the functions of a belt sander and a disc sander. Designed for precise processing of wooden and wood-based components, it is ideal for craft workshops, model-making studios, and service facilities. Thanks to its compact design and robust components, the machine provides high accuracy and flexibility for a wide range of sanding applications. Main Advantages of the Machine Combined belt and disc sander – vertical and horizontal belt operation increases the machine’s versatility. Precise angle sanding – achieved with the adjustable work table and linear angle gauge. Compact dimensions – space-saving design, ideal for smaller workshops. Stable construction – grey cast iron base minimizes vibrations and improves working accuracy. Effective dust extraction – a 60 mm dust outlet allows connection to an extraction system. Design and Technology The sander is equipped with a durable grey cast iron base, providing high rigidity and resistance to deformation. The 310 × 190 mm work table ensures stable material support, while its adjustment range of 0°–45° enables accurate bevel sanding. The graphite belt support provides smooth and consistent belt movement, resulting in excellent surface finishing quality. Precision and Work Efficiency The CORMAK BDS 6x9 delivers high sanding precision thanks to the high operating speeds of the sanding disc (23 m/s) and sanding belt (5.5 m/s). This allows efficient material removal and surface preparation before further processing or painting. The motor with a power rating of 550 W (S1) / 750 W (S6) provides optimal performance while maintaining low noise levels and efficient energy consumption. Applications The BDS 6x9 model is suitable for: woodworking and craft workshops, restoration and conservation studios, model-making and handicraft applications, technical schools and training centers, repair and maintenance workshops. Standard Equipment Belt and disc sander with 230 V motor Adjustable-angle work table Linear angle gauge Graphite belt support Ø60 mm dust extraction outlet Polish-language operating manual (DTR) Optional Equipment Dust extraction system Replacement sanding belts and discs Mobile stand Technical Specifications Parameter Value Sanding belt size 1220 × 150 mm Sanding disc diameter 225 mm Work table size 310 × 190 mm Maximum sanding length 590 mm Dust extraction outlet diameter 60 mm Angle sanding range 0°–45° Djdsvugrkspfx Ai Asck Belt speed 5.5 m/s Disc speed 23 m/s Motor power S1 S1: 550 W / S6: 750 W Power supply 230 V Weight 54 kg Warranty 12 months Manual (DTR) Included