Working platform

Arbeitskorb V 1500 AB

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Lasdpfx Aajd E A I Is Eok Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Drive power 2 x 11 kW Lodpfetzbvyox Aa Ejak Total drive power 22 kW Weight 2,600 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. Laodohigmbepfx Aa Eek On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. Laodsumubyjpfx Aa Eek The system can be viewed during operation. A new extruder screw was installed in February.

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Lasdewva Hispfx Aa Esk Cutting unit size: length 1600 mm x width 980 mm Quick-change blade system, SEW gearbox, Including hydraulic pusher, hydraulic rated power: 7.5 kW, Control cabinet, Cutting unit overhauled, Dimensions: Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Total weight: approx. 17 t

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° Lajdpfx Aaoua Iuls Eok no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 Ledpfx Aour Ravja Esak The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Lsdpfjt Ucqfsx Aa Ejak Serial number: 099314 Year of production: 1994 Maximum capacity: 25,000 kg/h Bale outlet dimensions: 77 cm x 52 cm The baler is operational - it worked until the production line was extinguished. Recently there was a problem with automatic binding.

Year of construction: 2017, condition: ready for operation (used), Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible. Lajdpfx Aowty Hkoa Eok

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Laedpfjuqd Udox Aa Eok Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm