Used Sanders for sale (1,637)

Condition: reconditioned (used), machine/vehicle number: 9958, functionality: fully functional, Power connection: 380V, 7.3 kW Dust extraction: 1x 120 mm, 1x 180 mm Sanding table dimensions: 2850 x 1550 mm Hfedeiau Tlopfx Aicek Sanding belt dimensions: 7820 x 150 mm Table height adjustment via handwheel Length x Width x Height: 4400 x 1700 x 1450 mm Weight: approx. 1100 kg

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 950 kg, Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, main drive motor 7.5 kW, feed motor 0.26 - 0.55 - 1 kW, pneumatic belt oscillation and belt air-blast, frame support, chassis. Hfodpfx Ajxq Ehxoicek

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor Hfedpfotwqn Sox Aicok - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 9673240, grinding width: 1,100 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 1,120 mm, Combination sanding unit with contact roller and air sanding pad Brush roller Pneumatic sanding belt tensioning Motorized thickness adjustment Technical data max. working width 1100 mm max. workpiece thickness 150 mm min. workpiece thickness 3 mm Sanding belt dimensions 1900 x 1120 mm Hfsdpfx Ajtppzvjicjk Feed speed 5/10 m/min. Motor power sanding unit 15 kW Motor power height adjustment 0.50 kW Motor power feed carpet 0.5/1.0 kW Operating pressure 6 bar Air consumption approx. 20 l/min Suction nozzle 2 x 200 mm Weight approx. 2100 kg Machine width approx. 1750 mm Machine depth approx. 1700 mm Machine height approx. 1900 mm

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Hfedpfxsiyp Rfj Aicjk

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Hfedeya I Rispfx Aicok Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: Hfedpfxex Rdn To Aicok 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: used, Year of construction: 1979, Belt width: 150 mm Hedpswm Nrpefx Aicjfk Belt length: mm Table size: approx. 2600 mm x 1000 mm Extraction connection: Motor power: 3 kW Machine length: Machine width: Weight: 900 kg

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Factory overhauled to the latest standard 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Hedovy Dt Nopfx Aicsfk Machine completely overhauled - for more information see appendix

Condition: new, Year of construction: 2024, functionality: fully functional, UNITEK NICE 950 2N RKRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Sanding roller, rubber-coated, Ø 150 Finishing pad 50 mm Sanding belt motor power 15 HP Sanding belt speed 18/16 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning rollers Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Hjdoznwp Ajpfx Aicsfk Dust extraction 2 pcs. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Belt motor power 20 HP Automatic conveyor belt centering Oscillating cleaning blower, timer-controlled, 2 pcs. UNITEK NICE 950 1N KRT Working width 950 mm Sanding belt size 970 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/s Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Automatic sanding belt centering "ECO GEAR SYSTEM" Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness Rollers on infeed and outfeed table, 2 pcs. Dust extraction 1 pc. - Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Oscillating cleaning blower, timer-controlled UNITEK NICE 650 1N KRT Working width 650 mm Sanding belt size width x length 670 x 2150 mm Maximum working height 160 mm Calibrating roller, steel, Ø 150 Finishing pad 50 mm Sanding belt motor power 10 HP Sanding belt speed 18 m/sec Feed motor with variable speed 0.75 HP Feed speed 4-20 m/min Table lifting motor power 0.33 HP Self-centering of sanding belts using the system “ECO GEAR SYSTEM” Quick stop belt brake Oscillating tensioning roller Rubber-coated pressure rollers Safety bar Electronic digital display of workpiece thickness 2 rollers on infeed and outfeed table 1 dust extraction port Ø 160 Automatic work thickness positioning Additional equipment (included in the price): Mobile cleaning blower for the sanding belt Warranty 12 months on spare parts.

Condition: used, Code: 0354 Brand: JET/USA Model: DDS 225 - CE Standard Hodpfoy A Synox Aicsfk Automatic 2-roller calibrating sanding machine for wood, furniture, joinery, custom made furniture, panels, wooden joinery, plastics and various materials – CE Standard Features: Sturdy construction Outfeed roller adjustment independent of the infeed roller Hard rubber coating on the rollers 2-speed conveyor belt Working width 635 mm Min workpiece length 230 mm Min workpiece height 0,8 mm Max workpiece height 133 mm Roller dimensions 152 x 635 mm Roller rotation speed 1400 rpm Conveyor belt speed 2–3 mt/min 2 suction inlets diameter 100 mm each Power output 5 Hp Enclosed base with door Abrasive belt 80 gr Abrasive belt 100 gr Overall dimensions mm 1150 x 1150 x 1050 h Weight kg 330

Condition: used, machine/vehicle number: 008654, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: adjustable Hedpfx Aszpfbieicjfk Vacuum feed belt: yes No. Operating units: 2 Nr sectioned swab: yes

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Machine is immediately available Hfjdpjndcctsfx Aicsk Machine ran until a few days ago without problems in production but was very rarely used

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Hsdpey D Du Hsfx Aicsfk

Condition: used, Year of construction: 1997, used good condition low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Hjdpezkvy Ejfx Aicjfk Calibrating roller Grooved Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Hfedpfxjw I U N Ij Aicok Dedusting brush: yes Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: used, functionality: fully functional, Wide belt sander SCM Sandya Win Working width: 630 mm Sanding height: 3 – 140 mm 1 combination unit Electric height adjustment Hfsdpfx Aijzmg Swecek Pneumatic oscillation Two feed speeds

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18.03.7507, grinding width: 1,100 mm, grinding height: 150 mm, grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, roller diameter: 150 mm, TECHNICAL DETAILS Maximum sanding width: 1,100 mm Maximum sanding height: 150 mm Abrasive belt length: 1,900 mm Abrasive belt width: 1,100 mm Roller diameter: 150 mm Max. working width: 1,100 mm Min. working height: 3 mm Max. working height: 152 mm Min. feed speed: 2.5 m/min Max. feed speed: 8 m/min Feed motor: 0.55 kW Feed speed regulation: Stepless MACHINE DETAILS Motor: 11 kW (15 HP) Voltage: 400 V Power consumption: 28 A Fuse: 32 A Output: 15.6 kW Dimensions & Weight Dimensions (L x W x H): 1,900 x 1,800 x 2,200 mm Transport weight: 1,500 kg EQUIPMENT Sanding unit COMBI Pad sanding unit (position: top) Roller material: Rubber CE marking Hfodpfx Aey Nx Dyjicek

Condition: used, functionality: fully functional, Stemac COMET-1 combination wide belt sanding machine Hodpfx Aezh Naaeicsfk with sanding belts, working width max. 1300mm, workpiece thickness max. 160mm, workpiece thickness min. 3mm, as per images and inspection, self-dismantling Color: green Condition: used Payment method: prepayment by bank transfer Location of goods: carpentry workshop/hall 2 Shipping: Self-collection only - No shipping is offered for this item!

Condition: new, Working width 1350 mm Number of sanding units 2 st. Hfedsrmucxopfx Aicek Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: new, Year of construction: 2026, CORMAK MM2315 400V Wood Edge Sander The CORMAK MM2315 400V is a professional oscillating edge sander designed for intensive use in woodworking shops and manufacturing facilities. Equipped with a powerful motor, a precision belt tracking system, and an adjustable sanding unit, it enables efficient and accurate sanding of edges, flat surfaces, and irregularly shaped workpieces. Its compact design combined with a large working table makes it a versatile solution for professional wood processing. Key Features Oscillating sanding belt – ensures even belt wear, reduces the risk of scorching the workpiece, and extends the service life of abrasive belts. Curved workpiece sanding – made possible by the additional 300 × 250 mm auxiliary table, allowing precise guidance of irregularly shaped components. Quick belt replacement system – an intuitive lever enables fast belt changes without the need for tools. Adjustable sanding unit for vertical and horizontal operation – expands the machine's versatility and allows the sanding unit to be positioned according to production requirements. Adjustable worktable height – provides precise height adjustment within an 80 mm range, adapting the working position to different material thicknesses. Large work surface – the 840 × 300 mm main table ensures stability and comfort, even when sanding large workpieces. Construction and Technology The machine is built on a heavy-duty steel frame that provides excellent rigidity and vibration resistance. At its core is a 2.2 kW motor, delivering the power and performance required for efficient material removal, even during continuous operation. The 2515 × 152 mm sanding belt operates at a speed of 980 m/min, ensuring fast and consistent sanding results. The oscillating belt mechanism is one of the key advantages of this model, significantly improving surface finish quality while minimizing sanding marks. An additional 700 mm side fence supports long workpieces, providing better guidance and greater control during operation. Precision and Performance The sanding angle can be precisely adjusted from 0° to 45°, allowing both edge and end-grain sanding to meet specific production requirements. The adjustable table height and the ability to process various workpiece sizes—from thin strips to thick panels—provide excellent production flexibility. Thanks to the movable sanding unit, the operator can set the optimal working position, while the integrated Ø100 mm dust extraction port allows connection to a dust collection system, helping maintain a clean and safe working environment. Standard Equipment Height-adjustable worktable Auxiliary table for curved workpieces Adjustable sanding unit Oscillating belt system Quick belt replacement mechanism 700 mm side fence Dust extraction port Operating manual (Polish) CE Declaration of Conformity Technical Specifications Specification Value Sanding belt size 2515 × 152 mm Worktable size 840 × 300 mm Edge and end-grain sanding angle 0–45° Auxiliary table size 300 × 250 mm Table height adjustment 80 mm Side fence size 700 × 60 mm Maximum sanding length 790 mm Dust extraction port diameter 100 mm Belt speed 980 m/min Motor power 2.2 kW Hodpozrvazsfx Aicsfk Power supply 400 V Weight 138 kg Warranty 12 months Operating manual Yes CE Declaration Yes

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Hjdszi A R Iopfx Aicofk Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, grinding belt length: 2,150 mm, input current: 39 A, Wide belt sander SCM suitable for calibration/sanding of solid wood, veneer and lacquer base. Model: Sandya 600 RCS Working width: 1.100 mm Working thickness: 4-170 mm Main motor: 15 kW (invertor) Abbrasive belts speed: 3-16 m/s (inverter) Feeding speed: 3-18 m/min (inverter) Abbrasive belts length: 2.150 mm Aggregates: 1. Steel calibrating roller R (diam. 140 mm) 2. Combinated unit CS: - rubber coated roller (diam. 160 mm, hardness 30Sh) - elektronic sectional pad (segments width 30 mm) 3. Sanding brush ScotchBrite (diam. 150 mm) Other equipment: - 5 idle supporting rollers at infeed - 5 supporting rollersat outfeed (1st roller motorized) - version C-Plus - pneumatic exclusion of the 1st roller - pneumatic exclusion of the 2nd roller and the pad - electronic programmator LOGIC TS with LCD touch screen 10,4" - motorized height adjustment Stat of the machine: very good Production year: 2016 Weight: 1.400 kg El. power: In=39A Machine availability: cca April 2026 Hfodpfx Aisygddljcek

Condition: excellent (used), functionality: fully functional, COPY SHAPER and SANDER machine , automatic , model PADE UINZE 2+2 second hand machine working condition : Excellent CE mark : YES the machine has been designed for the production of parts of tables , chairs , furniture , etc. the machine executes shaping and sanding operations simultaneously on two sides of a workpiece , with the aid of a template prepared according to the desired shape with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one Hedpfx Ajzk I Egsicefk 1+1 shaping / sanding units . motor power each one Hp 5 / 6,5 ( 2 speeds ) max. working width mm.350 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:15 m/min. hydraulic carriage return speed: 40 m/min. volt. 380/50 total installed power Kw 30 weight kg. 3500

Condition: excellent (used), Year of construction: 2019, operating hours: 614 h, functionality: fully functional, machine/vehicle number: LB828023A, grinding width: 1,350 mm, power: 46 kW (62.54 HP), COSTA S6 CTT 1350 wide belt sanding machine Professional wide belt sanding machine COSTA S6 CTT 1350, equipped with 3 working units in configuration C25 + T + T. The machine is designed for high-quality calibration and sanding of wood-based panels and similar materials. Main technical data: * Working width: 1350 mm * Sanding belt length: 2620 mm * Working thickness: 3–160 mm * Feed speed: 4–20 m/min Hodpfxezgbxfs Aicjfk * 1st unit: C25 roller unit, 18.5 kW * 2nd unit: sanding pad unit, 11 kW * 3rd unit: superfinishing unit, 11 kW * External cleaning brush: 1.1 kW * Approx. installed motor power: 46 kW * Power supply: 400 V / 50 Hz * Pneumatic pressure: 6 bar * HMI Vision control panel * CE compliant Machine suitable for professional woodworking and panel processing applications.