Used Rotator for sale (7,961)

Condition: used, Year of construction: 2026, functionality: fully functional, load capacity: 1,500 kg, construction width: 1,200 mm, Rotating device Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Technical condition: New Fsdpezhp Dfsfx Agxjgi Description: Rotating device, 205 degrees, for complete emptying of all containers, load capacity 1500 kg, support arm permanently mounted/foldable, incl. hoses & quick couplings, available from stock.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Positioning accuracy, X-/Y-axis: 0.003 mm Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Fodps Agu Spefx Agxsgi Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: used, Year of construction: 2015, functionality: fully functional, empty load weight: 320 kg, load capacity: 2,500 kg, construction width: 1,150 mm, Rotator Fgjdpfx Aox Twmhsgxoi Load centre: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: In addition to this unit, we offer further forklifts and warehouse technology. All our equipment is workshop-inspected and tested according to FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we also purchase your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing on attractive terms are available upon request. We are happy to provide you with professional and comprehensive advice on our vehicles.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; Fgedpfx Aez Ir Hajgxsi – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: used, operating hours: 1,165 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, hours: only 1,165!, previous owner: German Armed Forces (Bundeswehr), rated load capacity: 3,500 kg, lifting height: 3,500 mm, duplex mast, hydraulic side shifter, rotating fork carriage, 3rd hydraulic circuit, full cabin, diesel engine: [30 kW / 41 hp], fork length: 1,800 mm, weight: 4,921 kg, immediately ready for operation! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Power steering, cabin Fgodpfxsz Nuy Ts Agxji = Further information = Year of manufacture: 2013 Lifting capacity: 3,500 kg Overall height: 250 cm Please contact Tobias Ebert for further information.

Condition: used, Rotary table, welding positioner, Used Machine Manufacturer: Weiss GMBH Type: TC 320-06 Overall Dimensions: Fedpfs Ahyn Sjx Agxjgi Width: 1010 mm Depth: 1010 mm Height: 1000 mm Electrical Data: 400V, 0.7A Table Size: Ø 1010 mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. Fgsdjz Irr Aspfx Agxji ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: new, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotating device Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: New Fgodpfez Idtrsx Agxei Technical condition: very good Description: Good, ready-to-use condition, as returned by the previous owner // good working condition, as back from the pre-owner - without fork arms (available at an extra cost) - 180° swivel angle (standard left-hand rotation)

Condition: used, Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Item description: For sale is a HAAKE RheoStress 6000 rotational rheometer from Thermo Scientific – a highly precise measuring instrument for the rheological characterization of various materials. Ideally suited for use in research, development, or quality control. However, the device is not operational as the air bearing is defective. Technical specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 min⁻¹ Speed range (CS mode): 10⁻⁷ to 1500 min⁻¹ Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special features: Very high measurement accuracy due to low inertia Precise lifting mechanism (0.5 µm setting accuracy) Modularly expandable (High Shear, RheoAdaptive Control) Compatible with various thermostats Fsdpozia Iwofx Agxogi Scope of delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Rädlinger swivel rotator for CAT M318 / CW 40 mount / Year of manufacture: 2016 Price: €12,890.00 net / €15,339.10 gross - Equipment class: 23 tons - Weight: 840 kg A rigid trench bucket for €1,490.00 net is also available as an optional accessory. Price only valid in conjunction with the purchase of the swivel rotator. We have many other attachments in our warehouse that are immediately available! Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. Fgedpjymi I Aofx Agxji We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal number: 562046 = Further information = Year of manufacture: 2016 Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Rotating table, welding rotator, rotating workpiece table, Used machine Manufacturer: Weiss GMBH Type: TC 150-08 Overall dimensions: Width: 400 mm Depth: 320 mm Height: 130 mm Fedpfx Aj Ahym Asgxsgi Electrical data: 400V, 0.11kW Table size: Ø 320 mm

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Fodswty H Dopfx Agxegi Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Fjdpsgq N Ezefx Agxsgi JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: used, Year of construction: 2021, useful stroke 1.700 mm workpiece weight 2,20 t rotation +/- 190 ° stroke speed 1,00 / 0,50 m/min Fodpfx Agewzmnkoxjgi Rotating speeds 0,50 U/min component measurement max. 6.000 x 2.550 x 1.400 mm Control SIEMENS HMI total power requirement 8,00 kW weight of the machine ca. 8,00 t dimensions of the machine ca. 6,00 x 4,00 x H4,00 m HYWEMA lifting and turning device. The product is used as a work aid to lift loads for ergonomically favorable assembly- or welding work.

Condition: used, For inquiries regarding the attachment, Mr. Herden (tel. ) will be happy to assist you. Kinshofer demolition grapples / grapples / MS21 / MS25 / incl. rotator / in stock & immediately available Price: €8,890.00 net / €10,579.10 - Shell width (mm): 1,150 - Capacity (liters): 800 - Weight (kg): 1,780 - Operating weight (t): 20 – 27 Equipment: - Incl. MS21 / MS25 mount - Incl. rotator - Incl. hydraulic hoses, see photos In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Fgjdeznrrfopfx Agxji Errors and prior sale excepted! = Further information = Intended use: Construction Unladen weight: 1,780 kg Please contact Marius Herden for further information.

Condition: used, Year of construction: 2017, functionality: fully functional, The Jaeckel model T6 FGR K1 turning device is a versatile and reliable solution for the efficient reshaping and processing of workpieces. It is characterized by its precise control and robust construction, ensuring high accuracy and durability. The device can be easily integrated into existing production processes and allows for quick retooling as well as flexible applications. Fgjdpfjwrdt Sex Agxoi

Year of construction: 2016, condition: used, Year of construction: 2016 Quick coupler system: Yes General condition: very good Technical condition: very good Visual appearance: very good Price: On request Fgedpfx Agjzln Svsxei = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2025, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer Fjdpfx Ao Airytjgxjgi 14 Position Rotating Tool Changer Convenience Package Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Energy Saving Function Powercontrol with powerTouch woodWop for machine woodMotion simulator for Machine 3 Phase 400V 50Hz CE

Condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (on Tel. ...). DMS RL70120 Rotator Bucket / incl. Rotator / MS03 Mount / NEW item / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Weight: 217 kg - Cutting width: 1,200 mm - Volume: 220 l - Max. output speed: 9 – 10 rpm - Max. torque: 6,960 Nm - Recommended oil flow (rotation): 35 – 45 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 4 – 7 tons Optional: - MS03 Mount: €560.00 net - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. ...) is at your service. Upon request, we are happy to provide you with a financing offer. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for Magni telehandlers. Fedpfx Ageyxadaexogi We are an official distributor and service partner for JCB construction machinery. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete DMS product range! Subject to errors and prior sale. = Further information = New: Yes Intended use: Construction Empty weight: 217 kg Contact Marius Herden for more information.

Condition: used, This listing is for TSI Airflow LCA501 in Case. The unit is in full working condition and ready for immediate use. TSI Airflow LCA501 digital vane anemometer with carry case. Designed for high-accuracy air velocity and volumetric flow measurements in HVAC and lab safety applications. Features logging, data download, and 100mm reversible head. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Fodpfx Asyx Igisgxogi • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, For inquiries regarding the attachment, Mr. Herden is your contact (by phone: [number] ). DMS RL40100 Rotary Bucket / incl. rotator / MS03 mount / NEW unit / in stock & immediately available Price: €5,190.00 net / €6,176.10 gross - Weight: 115 kg - Cutting width: 1,000 mm - Volume: 155 l - Max. output speed: 11–12 rpm - Max. torque: 1,337 Nm - Recommended hydraulic flow for rotation: 16–20 l/min - Max. operating pressure for rotation: 210 bar - Excavator class: 2.5–4.0 t Optional: - MS03 mount: €560.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. [number]) will be happy to assist you. On request, we are also pleased to provide a financing offer. We are an official sales and service partner for DMS. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. Fgjdpfjyhymvox Agxsi We are an official sales and service partner for Holp. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and interim sale excepted! = Further information = New: Yes Application: Construction Unladen weight: 115 kg Please contact Marius Herden for further information.

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Fodpfx Ageyrg H Hsxjgi

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (via phone). DMS RL100140 Rotating Bucket / incl. Rotator / MS08 Coupling / NEW unit / in stock & immediately available Price: €8,090.00 net / €9,627.10 gross - Weight: 305 kg - Cutting width: 1,400 mm - Volume: 400 l - Max. output speed: 10 – 11 rpm Fedpsyhympsfx Agxogi - Max. torque: 8,460 Nm - Recommended oil flow for rotation: 50 – 60 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 7 – 10 tons Optional: - MS03 coupling: €560.00 net - MS08 coupling: €890.00 net We have a very large selection of various DMS products in stock and immediately available in our warehouse! Mr. Herden (phone) will be happy to assist you. Upon request, we are also happy to provide you with a finance offer. We are an official sales and service partner for DMS. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB Construction Equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range! Subject to errors and prior sale! = Further Information = New: Yes Application: Construction Unladen weight: 305 kg Please contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). DMS RL2590 Rotator Bucket / incl. Rotator / MS01 Coupler / NEW unit / in stock & immediately available Price: €4,190.00 net / €4,986.10 gross - Weight: 101 kg - Cutting width: 900 mm - Volume: 100 l - Max. output rotation speed: 9–10 rpm - Max. torque: 1,337 Nm - Recommended oil flow for rotation: 12–16 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 1 – 2.5 t Optional: - MS01 Coupler: €330.00 net - MS03 Coupler: €560.00 net We have a very large selection of various DMS products in stock and available for immediate delivery! Mr. Herden is happy to assist you (by phone). Upon request, we are pleased to provide you with a financing offer. We are an official sales and service partner for the following brands: - DMS - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz Fgodpfx Agsyhymijxei - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = Additional Information = New: Yes Intended use: Construction Unladen weight: 101 kg Contact Marius Herden for more information.

Year of construction: 2009, condition: used, GMM rotating head bridge saw with 5 working axes. Automatic rotating support, 0-90°. Automatic rotating head, 0-370°. Maximum blade diameter: 625 mm. Saw motor power: 23.5 kW. Tilting table with hydraulic tilt: 3500 mm x 2000 mm. Camera. 15″ Touchscreen. Fodpszz Nuksfx Agxegi Laser.