Lifting and rotating device

Jaeckel Modelle T6 FGR K1

Condition: new, functionality: fully functional, New machine - stock clearance sale - Tipping is mechanical. The stated price is net ex warehouse location. Bsdpfjw Sfdwox Acvewk

Condition: new, Year of construction: 2025, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet Bwsdpfx Aog D Ntmjcvsk C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, workpiece weight (max.): 1,814 kg, table length: 2,200 mm, operating speed: 12,700 mm/s, table width: 1,700 mm, warranty duration: 24 months, pump pressure: 4.138 bar, power: 30 kW (40.79 HP), 𝐃𝐢𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧 𝐝𝐞𝐫 𝐖𝐚𝐬𝐬𝐞𝐫𝐬𝐭𝐫𝐚𝐡𝐥𝐬𝐜𝐡𝐧𝐞𝐢𝐝𝐚𝐧𝐥𝐚𝐠𝐞 𝐢𝐬𝐭 𝐟𝐫𝐞𝐢 𝐰ä𝐡𝐥𝐛𝐚𝐫. 𝐌𝐞𝐥𝐝𝐞𝐧 𝐒𝐢𝐞 𝐬𝐢𝐜𝐡 𝐠𝐞𝐫𝐧𝐞 𝐮𝐧𝐝 𝐭𝐞𝐢𝐥𝐞𝐧 𝐒𝐢𝐞 𝐮𝐧𝐬 𝐈𝐡𝐫𝐞 𝐊𝐨𝐧𝐟𝐢𝐠𝐮𝐫𝐚𝐭𝐢𝐨𝐧𝐬𝐰ü𝐧𝐬𝐜𝐡𝐞 𝐦𝐢𝐭. 𝐙𝐮𝐦 𝐁𝐞𝐢𝐬𝐩𝐢𝐞𝐥: OMAX MAXIEM 1530, 30 kW MAXIEM pump and A-JET angle cutting head - general overhaul with manufacturer certification and two-year warranty. Customers looking for efficient and cost-effective waterjet cutting systems will find their home in the MAXIEM modular line. These powerful MAXIEM systems combine flexibility of use and affordability and can be expanded with a wide range of accessories to suit your cutting task. With the Modular Line MAXIEM, OMAX presents sophisticated, reliable waterjet cutting technology at an extremely economical entry-level price, thereby opening up the advantages of this technology for many areas of application. Bwodpfx Acsrm Ilfjvsk - 𝐀𝐮𝐟 𝐖𝐮𝐧𝐬𝐜𝐡 𝐅𝐢𝐧𝐚𝐧𝐳𝐢𝐞𝐫𝐮𝐧𝐠 𝐨𝐝𝐞𝐫 𝐋𝐞𝐚𝐬𝐢𝐧𝐠 𝐦ö𝐠𝐥𝐢𝐜𝐡 (𝐳.𝐁. 𝐛𝐢𝐬 𝐳𝐮 𝟖𝟔 𝐌𝐨𝐧𝐚𝐭𝐞𝐧) - accurate to ±0.025mm - No hardening on the cutting edges - No special requirements for workpiece fixing - no tool changes - no starting holes - no toxic gases or vapors - Software and machine components according to the latest OMAX technology The precise cutting head can achieve an accuracy of ± 9 arc minutes and saves reworking on other processes (e.g. grinding). The machine is currently undergoing a general overhaul, so the illustrations are similar to the offer. Prompt delivery can be arranged with INNOMAX AG.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, input voltage: 400 V, total length: 3,050 mm, total width: 95 mm, total height: 1,550 mm, warranty duration: 24 months, working range: 3,015 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Glorystar All New Small Fiber Laser Cutting Machine | GS-3015C | 1500-6000W The machine fits in a container. Bwjdpfouc Nd Tsx Acvsk This GS-C Series SMALL FIBER LASER CUTTING MACHINE is designed for cutting small-sized metals, with the working area of 1510 (3′x5′) and 3015 (5′x10′) to choose from. Thanks to its small and compact design, it can save space and cost for you. The machine includes: Closed Type Structure Pull-out Worktable Advanced Fiber Laser Source：IPG/MAX/RAYCUS/GLORYSTAR Brand Optionl Auto-Focus and Collision Protection Cutting Head FSCUT Cutting System Automatic zoning dust removal High-strength Welded Bed Max Acceleration: 1G BOCI cutting head SKR Linear Guide Rail X/Y Axis High-Precision Rack: LEADRACK Electric Control Proportional Valve: Felton/SMC Control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System complete incl. cooler, extraction system and safety light barriers Demonstration machine as good as new

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W 2-year warranty. Warranty and post-warranty service included. Stock of spare parts and consumables maintained. From order to commissioning in as little as 5 working days. The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding, designed for both thin and thick materials. Compared to conventional methods, laser welding delivers up to 4x faster cycle times, significantly reduced heat distortion, and welds that require no additional post-processing. Welding thin aluminium and stainless steel is straightforward and repeatable — unlike TIG, which demands a highly experienced operator. The machine supports single or dual wire feeding, enabling larger gap bridging and a wider weld bead when needed. Technical parameters (1500W / 2000W / 3000W): - Laser wavelength: 1070 nm +/-10 nm - Maximum power consumption: 8 kW / 10 kW / 13 kW - Cooling system: water-based - Operating voltage: 400V 16A / 400V 32A / 400V 63A - Penetration depth: 0.2-2 mm / 0.2-3 mm / 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80 kg / 90 kg / 100 kg The price includes: - Integrated water cooling system - Raycus laser source - Touch screen with Polish-language menu - Ergonomic plastic welding head - Single / dual wire feeder (optional) Bwedot Al Txopfx Acvok - Instruction manual in Polish\English - CE Declaration of Conformity Weld samples can be produced on request for the customer's specific workpiece material. Machines are available in various configurations, working ranges and laser power outputs. The listed price applies to the CX-CS1500-H (1.5 kW) model with single wire feeder. Actual appearance of individual components may differ from images shown.

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers Bwodou Evqhspfx Acvjk - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Bsdpfx Aor Eqbyscvowk Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€) Bedpfxoi Hckro Acvswk

Condition: like new (used), machine/vehicle number: FDL-150-100E/NC, functionality: fully functional, pressing force: 150 t, table width: 800 mm, clearance between the columns: 1,250 mm, total length: 1,200 mm, working height: 600 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. Bjdpfxewpg Awo Acvewk • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.