Used Welding Rotator for sale (12,845)

Condition: good (used), Year of construction: 2019, functionality: fully functional, load capacity: 30,000 kg, total height: 650 mm, total length: 2,500 mm, total width: 1,600 mm, overall weight: 970 kg, table load: 30,000 kg, product height (max.): 500 mm, workpiece weight (max.): 30,000 kg, Equipment: foot remote control, Capacity: 30 Ton Workpiece diameter range: ø 235 mm min. / ø 5.517 mm max. Roll speed: 103–1.032 mm/min Complete with: Hjdpfx Ajz H Nq Hjp Eofn - Driveunit LPP30-30-FM-WE - Idler unit LIP30-FM - Dual motor drive - Radio remote control Euroweld Country of origin: UK Motor power: 2,2 kW Machine (L×W×H): 250 x 160 x 65 cm Machine weight: 970 kg

Condition: used, Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Hfjdpfxoz I Df Uo Ap Een Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Hjdpfx Apeyrg H Hs Eefn

Condition: used, Welding Rotator SAF POSISAF 1E Hfjdpfjz I Dgxjx Ap Eon Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Hfedpfxjwtq Dts Ap Esn Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Hjdpfoyrg Hyox Ap Esfn

Condition: good (used), Year of construction: 1980, Offer 24518 Hfedpevtnyyefx Ap Een Technical data: - Load capacity 150 kg - Cross supports + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotation continuously adjustable - Right-hand and left-hand rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm - Weight approx. 150 kg .

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding device, welding rotator, welding rotator and tilting table, welding rotator -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm -Drive: 0.1 kW -Speed: RPM -Axes: 2 pieces (swivel by hand) -Quantity: 1x welding rotator available -Price: per piece Hodpfx Aedwpduop Esfn -Dimensions: 830/450/H920 mm -Weight: 174 kg

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Year of construction: 2003 Maxi Capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Hfedpfxez I Dgrj Ap Een Total dimensions on support: 400 x 400 mm x H 1100 mm

Condition: used, Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible. Hodpfxszxr Rie Ap Eefn

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Kistler, Tilting welding turntable with mobile base -Turntable: Ø 400 mm -Speed: 0.08 to 6.3 rpm / 0.01 to 8 m/min at Ø 400 mm -Direction of rotation: clockwise/counterclockwise -Axles: 2 pieces -tiltable: hand Hjdpfjh D Il Tox Ap Ejfn -Height adjustment: No -Quantity: 1 piece available -Overall dimensions: 740/580/H630 mm -Weight: 145 kg

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Hsdpewtxxrsfx Ap Ejfn Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Hodpfjxlr Tdox Ap Esfn rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: excellent (used), Year of construction: 2015, 2015 Bode 2VP10 Welding Positioner Hfsdoz H U R Espfx Ap Eon Load Capacity 10 Tonnes. Table Ø1,830mm. Tilt Range 135° (Power Tilt). Rotation 360°. With Variable Speed. Power 4.5kW. 415V Power Supply. S/No. 41280 (2015). NOTE - See Lot Description for Important Information on Final Bids and Equipment Collection. Overall Dimensions 2.3(L) x 2.2(W) x 2.7(H) Meters. Weight 9,800kg. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen Hsdpfxsz Sw N Aj Ap Eefn :- Cab lighting

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. Hfsdpsv Uzf Eefx Ap Eon We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. Hjdjy Efmgspfx Ap Esfn This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: good (used), Year of construction: 1966, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm Hedpfx Apsz Ruwue Eofn -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. Hfsdpfx Aozimbksp Ejn On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot Hfedpfx Asrl S Ufjp Een 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Hjdpfx Aezgaazjp Eefn Area requirement: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 320 x 950 mm -Rollers: Ø 240 x 170 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg Hodpfx Aezkqt Hep Eefn

Condition: not inspected (used), functionality: unexamined, total height: 880 mm, total length: 3,000 mm, total width: 1,500 mm, table width: 1,500 mm, overall weight: 2,500 kg, hole diameter: 30 mm, table length: 3,000 mm, Spot welding table Hfjdpfx Asz Spwljp Ejn FCA D-35614 Aßlar – loaded onto a truck.

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Hfodpfx Apey R I Tgj Esn Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Hfodpfx Aexbh Dqsp Ejn Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter