Used Ball Rotation Apparatus for sale (10,833)

Condition: good (used), Ball turning device, ball turning device, universal ball turning device Dwodpfxjv Sqttj Ab Nob -Manufacturer: Bilz, Universal ball turning device size 1 -Turning Ø: 0-80 mm -Dimensions: 440/260/H230 mm -Weight: 19.7 kg

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Dwsdpfxevzx Auo Ab Nob Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Dedpfx Aboq Nf U Es Nswb Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, Rotating Boring Table Dwedpszwuu Iofx Ab Nsb Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves). Dwodpfx Abjzxzage Nob

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill Dedpeq Nx Alsfx Ab Newb A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Dodpfxszvgdls Ab Nswb Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. Dwodpfoykubisx Ab Neb LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. Djdpfozvgvnox Ab Njwb White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW Djdpfx Abozxup Is Njwb

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Dwedszh I Iiopfx Ab Nsb Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Dwodoykudkepfx Ab Nsb Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Dwedpezt Twyofx Ab Neb Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Dedezfwavopfx Ab Nowb Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Dwodpfjq Ngafsx Ab Njb Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) Dwsdpfx Aozt Nlmeb Nob WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder Dwsdpfx Ajzul Dzsb Neb • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: used, Year of construction: 2019, functionality: fully functional, Control System (Standard) - HEIDENHAIN TNC-640 HSCI control unit with software option 1&2 (see control system options), DCM collision protection function - 5-axis simultaneous operation - Block processing time 0.5 sec. - NC memory capacity 21 GB on SSDR memory card - USB interface - Ethernet network interface - 1024-block look-ahead function - 3D tool length compensation function - DCM (Dynamic Collision Monitoring) - TSC (Spindle Thermo-Compensation) - Tool center point control (TCPC) - smarT.NC (alternative operating mode for dialog and plain text programming in a mix, particularly suitable for beginners) Linear axes: - Travel ranges X/Y/Z: 600/600/500 mm Linear roller guides: - Manufacturer: INA - Size: 45x45 mm Linear axis accuracy: - Manufacturer: HEIDENHAIN length measuring systems - Resolution linear glass scale: 0.0001 mm - Positioning accuracy X/Y/Z axis: 0.005 mm - Repeatability X/Y/Z axis: ±0.0025 mm Rotary axis accuracy: - High-precision angle encoder for A- and C-axis - A-axis positioning accuracy: ± 30" - C-axis positioning accuracy: ± 5" Ball screw (oil-lubricated): - Manufacturer: INA - Pitch: 12 mm - Max. speed X/Y/Z axis: 36,000 mm/min Swivel and rotary axis: - Swivel axis (A): - Swivel range: +120° / -120° - Drive: Worm gear (optional: direct drive) - Brake: hydraulic (1,200 Nm / 50 bar) - Speed: 16.6 min-1 - Rotary axis (C): - Rotation angle: 360° (0.001° increments) - Drive: Direct drive (torque motor) - Brake: hydraulic (2,900 Nm / 50 bar) - Speed: 90 min-1 Swivel and rotary table: - Table diameter: Ø500 x 420 mm - Max. table load: 600 kg - Max. load height: 430 mm - T-slots (number / size / slot spacing): 7 x 14 mm x 75 mm Spindle: - Manufacturer: ROYAL Precision Tools Corporation - Drive type: direct - Spindle motor / SIEMENS motor 1PH8133 - Power S1/S6 (40%): 25/35 kW - Max. torque S1/S6 (40%): 134/261 Nm - Max. speed 15,000 min-1 - Spindle taper: DIN SK-40 / MAS BBT-40 (Option: HSK-A63) - Spindle oil cooler Coolant management: Dwsdpfxozwxics Ab Nsb - External coolant supply around the spindle nose - Internal coolant supply through the spindle 20 bar with cartridge filter 40 µm, pumps adapted in the coolant tank - Number of magazine positions: 30 (optional: chain with 32, 48, or 60) - Magazine type: Carousel / Fixed position, coded - with tool change arm (double gripper) - Max. tool length: 300 mm - Max. tool diameter: Ø78 mm - Max. tool diameter: Ø120 mm with locked neighboring positions - Max. tool weight: 7 kg Chip management: - Hinged band chip conveyor Other standard equipment features: - Automatic central lubrication - High-pressure chip flushing / chip shower - Coolant gun - Control cabinet air conditioning - Coolant flushing gun - Work area lighting - 3-color warning light (cycle active / completed / alarm message) - Hand tool kit, leveling bolts, nuts, shims - EMC and safety modules for CE compliance - Portable, electronic handwheel - CE compliant with European directives - Hydraulic and pneumatic supply prepared through the table (3x 80 bar hydraulic and 1x 6 bar pneumatic connection). - Oil skimmer

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. Dwjdjyy Rtzspfx Ab Neb 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Dwsdpfozlqnyjx Ab Nsb Jet head's were removed from process in 2023 and kept as spares. In good condition. We have up to 8 of these available. Contact us for more information

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The PR622F4 is a specialized CNC horizontal boring machine developed and manufactured by the St. Petersburg-based TBS Machine Tool Plant. This heavy-duty machine is designed specifically for the needs of railway transport and transport engineering. It is intended for high-precision machining of key and critical rolling stock components. Thanks to specialized equipment, one such complex replaces a production line of 12 obsolete machines. WorkpiecesThe machine is used to process technological and operational surfaces of the following units:Axlebox housings and bolstersHousings, locks and lock holders of automatic couplingsNon-rotating shoes and safety devicesTraction clamps and centering beamsSide frames of freight trolleysDesign featuresHigh precision: the movements of moving units are controlled by precision feedback sensors along the X, Y, Z and W axes.Rigidity and stability: reliable hydraulic clamps ensure that the units are fixed in specified positions.Combined guides: sliding pairs (cast iron-TsAM/fluoron) are used along the X and Y axes together with hardened steel lateral rolling bearings.Precision ball screws: high-quality ball screws are used for smooth and precise linear movement of the units transmission. Rotary table (B axis): equipped with an automated precision stop system at positions 0, 90, 180 and 270 degrees. Protection of units: telescopic covers completely cover the bed guides from chips and dirt. Technological equipment For the implementation of complex technological operations, the PR622F4 machine is supplied with a specialized kit: Hanging faceplate, Hollow spindle extension, Special clamping devices for fixing automatic coupling housings and side frames of bogies, Sets of cutting tools and mandrels for specific parts Dwsdpfx Ajzr H T Eob Neb

Condition: excellent (used), functionality: fully functional, REF: MM6320 Dsdpjx I Sp Hofx Ab Nswb 1 x Bertuetti conical rounder with automatic flour duster for pieces of dough. Conical rounders work by using a rotating cone and fixed rounding channels (or troughs) to shape the dough pieces into a smooth, round ball. This process helps create an optimal shape and structure for the final product. Manufacturer - Bertuetti. Speed - Variable. Previously used for pieces of dough weighing between 80g-800g. Electrical requirements - 3 phase.

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw Dodpfx Aezv Safob Nowb - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Dwjdpow D E A Ejfx Ab Nsb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance Dwsdsxmfc Uepfx Ab Njb - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm