Used Roadtec Sb 2500 for sale (4,441)

Condition: used, Year of construction: 2005, edge thickness (max.): 3 mm, plate width: 3,000 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Plate thickness: min. 10 mm Plate thickness: max. 60 mm Plate width: max. 3,000 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3 mm Number of magazine positions for edge rollers: 2 Feed rate: max. 40 m/min Distance between carriers: 500 mm Machining units Number of edge machining units: 8 End capping unit Number of motors: 2 Motor power: 0.35 kW Speed: 12,000 rpm Fine milling unit for flush milling and rounding Number of motors: 2 Motor power: 1.03 kW Gbedpfj Aihtdsx Aiksw Speed: 12,000 rpm Edge rounding unit Number of motors: 4 Motor power: 0.35 kW Speed: 12,000 rpm Pre-milling unit 1 Number of motors: 1 Motor power: 5.5 kW Pre-milling unit 2 Number of motors: 1 Motor power: 5.5 kW EQUIPMENT Carrier chain Pressure system with rubber belt Preheating lamps for the plate side Edge roller magazine with 2 positions EVA hot melt adhesive tank EVA hot melt pre-melter Pressure roller unit End capping unit Fine milling unit for flush milling and rounding Edge rounding unit 2 pre-milling units Automatic, time-controlled activation of the second pre-milling unit Edge trimming unit Glue application unit Air heating unit with 2 motors PC WIN EDGE control system WIN EDGE programming software CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7818

Condition: used, Year of construction: 2010, functionality: unexamined, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, overall weight: 16,000 kg, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, input voltage: 50 V, number of spindles: 10, Equipment: motor brake, Description Weinig Powermat 2500 10 spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed rate: 37 kW / 12-120 m/min, Spindle arrangement: 1- Bottom (22 kW) - with hydraulic clamping and fully automatic straight-edge jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) - with fully automatic straight-edge jointer 5– Bottom (18.5 kW) with hydraulic clamping and fully automatic straight-edge jointer 6– Top (18.5 kW) - with hydraulic clamping and fully automatic straight-edge jointer 7- Top (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 8- Bottom (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 9- Top (53 kW) - with hydraulic clamping, speed 3000-6000 RPM 10- Bottom (53 kW) - with hydraulic clamping, speed 3000-6000 RPM Short infeed table 1.3 meters (4 rollers) with 2 driven rollers above the table, and 2 driven rollers in the table. Both table rollers are adjustable in height. Table height adjustment with electronic digital display. Incl. 2 heavy-duty side pressure rollers, diameter 140mm, pneumatic. Support feet, height 320 mm for table height 1190 mm Marathon P O W E R Coating for machine table, fences, and guide rails (excluding infeed table and special table plates). Special coating to protect table plates, fences and guide rails from excessive wear. Recommended for processing Godpfx Aij Airx Sokjbw abrasive materials (e.g. tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table lubrication. Dwoc Arfjz S U Upj Nbnsd Driven rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above with diameter 120 mm. In the area of the right and left spindles. Supplier Iurchiv Hobelmaschinen 91320 Ebermannstadt, DE

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, year of last overhaul: 2026, VAZ2500 (VAZ145/250U) Gsdpfxo Ah E Ngs Aikjbw

Condition: used, Year of construction: 2022, hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touchscreen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar- Gboded Nxn Njpfx Aikew

Condition: new, Year of construction: 2026, Combined brushing, polishing, and belt sanding machine – conventional, semi-automatic, or CNC-controlled. A universal machine for processing plates, panels, profiles, and structures up to 650 mm in height by brushing, polishing, and sanding with a long belt or a brush. Work table size available from 2,500 mm x 1,000 mm (optional 3,000 mm x 1,250 mm) to 5,900 x 1,300 mm. Dimensions of the brushing or polishing disc: Ø 250 mm x width 200 mm. Sanding belt dimensions: 8,200 mm x width 150 mm (depending on the size, up to 14,500 x 150). Drive power of the brushing and polishing unit: 3 kW. Sanding belt drive: 3 kW. Weight: approximately 900 kg. Godpfx Aj Ai D Unoikobw We also supply the machines with 2 workstations / two sanding belts – for example, with 1 workstation for manual operation and an opposing workstation for manual and automatic operation. The work table is moved to the respective workstation on linear guides.

Condition: new, Year of construction: 2026, Combined brushing, polishing, and belt sanding machine – conventional, semi-automatic, or CNC-controlled. A universal machine for processing plates, panels, profiles, and structures up to 650 mm in height by brushing, polishing, and sanding with a long belt or a brush. Work table size available from 2,500 mm x 1,000 mm (optional 3,000 mm x 1,250 mm) to 5,900 x 1,300 mm. Dimensions of the brushing or polishing disc: Ø 250 mm x width 200 mm. Sanding belt dimensions: 8,200 mm x width 150 mm (depending on the size, up to 14,500 x 150). Gbodpfs Ai Ealox Aikew Drive power of the brushing and polishing unit: 3 kW. Sanding belt drive: 3 kW. Weight: approximately 900 kg. We also supply the machines with 2 workstations / two sanding belts – for example, with 1 workstation for manual operation and an opposing workstation for manual and automatic operation. The work table is moved to the respective workstation on linear guides.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 06/2022, loading space length: 13,590 mm, loading space width: 2,490 mm, loading space height: 2,720 mm, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Equipment: tail-lift, Axle configuration Gsdpfx Aie Ai E Aajkebw Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 8.400 kg Carrying capacity: 21.600 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR.20, tail lift, 2500 kg Make of bodywork: Kassbohrer Maxima XJ2 Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 06/2027 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 08/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total length: 13,980 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: disc brakes Gjdps Ai E Ahofx Aikebw Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 75%; Tyre profile right: 75% Weights Empty weight: 8.140 kg Carrying capacity: 21.860 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR, tail lift, 2500 kg Make of bodywork: Kassbohrer Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 08/2027 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, ## 2021 Star SB-20R Type G – 20 mm CNC Sliding Head Lathe 7 axis | Twin spindles | Driven tooling | Guide-bush / non-guide-bush operation | FMB magazine bar feeder Available from Swiss CNC, this 2021 Star SB-20R Type G CNC sliding head lathe combines 20 mm bar capacity, twin-spindle machining and a versatile tooling platform for precision component production. Equipped with FANUC CNC control, it offers turning, milling, drilling, tapping and back-working capability within a compact machine layout. The 10,000 rpm main spindle and 9,000 rpm sub-spindle both feature C-axis control, supporting accurately positioned machining operations on the front and rear of the component. The fully independent sub-spindle allows front- and back-working operations to overlap where the component and programme permit, helping reduce cycle times and minimise additional handling. Gbsdpfx Aisz U Acmekew ### Guide-bush and non-guide-bush flexibility A key feature of the SB-20R Type G is its ability to switch between guide-bush and non-guide-bush operation. Guide-bush mode supports the material close to the cutting point, making it particularly suited to slender components and longer turned features. For shorter components, non-guide-bush operation can reduce bar remnant length and improve material utilisation. This flexibility allows manufacturers to adapt the machine to different component geometries and production requirements. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SB-20R Type G | | Year of manufacture | 2021 | | Maximum machining diameter | 20 mm | | Controlled axes | Seven: X1, Y1, Z1, C1, X2, Z2 and C2 | | Maximum headstock stroke — guide-bush mode | 205 mm | | Headstock stroke — non-guide-bush mode | Up to 2.5 × bar diameter, maximum 50 mm | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 9,000 rpm | | Sub-spindle chucking capacity | 20 mm | | Spindle positioning | C-axis control on both spindles | | CNC control | FANUC CNC | | Rapid traverse | Up to 35 m/min | ### Tooling capability - Gang-type turning-tool arrangement, with six 12 mm or seven 10 mm square turning-tool positions, depending on the fitted tool block. - Four front-working sleeve positions for end-working operations. - Cross-drilling and milling capability, with modular cartridge tooling configurations available for different machining requirements. - Four-position back-working station, supporting static or driven tooling according to configuration. - Independent sub-spindle movement for component transfer and rear machining. ### Included equipment - FMB Turbo 2-20 automatic magazine bar feeder for 3.2 m bar stock. - Filtermist FX mist extraction system. - LNS MH500 Turbo swarf conveyor. - FireTrace fire suppression system. - Selection of tooling and workholding. The supplied bar feeder, extraction and swarf-handling equipment provide a practical package for manufacturers looking to add automated 20 mm bar-machining capacity. ### Machine hours and availability Power-on and cutting hours to be confirmed. 2021 machines available in the UK, offered individually. Price on application, plus VAT. Delivery, installation and training available. Contact Swiss CNC for pricing, machine videos, inspection arrangements and further information.

Condition: excellent (used), warranty duration: 6 months, Used WP Kemper SBR 2500 belt rounding machine For doughs with high rye content and high stickiness. Technical data: Gbjdpfsuwqufox Aikow Capacity up to 2000 pcs/hour. Weight range: 500-2000g. Electrical connection: 400V; 1.3 kW. Dimensions: 2700 x 660 x 1500 mm.

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness Gjdpspgmqiofx Aikebw adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis Gbodpoz R T Exsfx Aikow - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: excellent (used), Year of construction: 2023, Great opportunity to purchase this high-end CNC turning machine with driven tools, Y-axis and counter-spindle. This machine was built in 2022, but installed and first used in February 2023. Only 1545 actual operating hours on the counter. Including: Subspindle and Y-axis Built-in Motor Turret with 12 tool stations Chip conveyor Manual in-machine tool presetter (pivoting type) Manual in-machine tool presetter (removable type) (Spindle 2) Standard Workpiece Unloader (Built-ln Type) Coolant system with increased pressure of 5 bar Full technnical specifications available in the attached document. Optional: set of tooling and tool holders (availability is to be discussed) This machine is in very good condition and can be inspected in operation in Belgium. Gbjdpfx Ao Aigt Roikjw Immediately available for delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Gedpeyx Daxsfx Aikebw Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2015, Offer 26275 Gbodpfxe Ai S R Ae Aikjw Technical specifications: - Length: 2500 mm - Width: 1250 mm - Top plate thickness + bottom plate thickness each: 8 mm - Total plate thickness with 20 mm spacer plates: 36 mm - Hole diameter of the perforations approx.: 28 mm - Center distance of the perforations approx.: 100 mm - Table substructure - Table legs, height-adjustable - Weight approx.: 400 kg

Condition: used, Year of construction: 2011, operating hours: 35,200 h, clamping force: 250 kN, displacement volume: 664 cm³, injection pressure: 2,000 bar, overall weight: 12,500 kg, screw conveyor diameter: 60 mm, terms of delivery: FCA Pegnitz Gsdpo Ai Uaujfx Aikjbw delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Gbodpe Agbi Defx Aikew

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Reject bin Weighing range - 0 to 1200 grams 240 volts Gedpsxtfymefx Aikjbw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, - washing machine - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table Gsdpfs Ah Rc Nsx Aikebw - year: 2006 - line length: 16.5 m - direction: right-left The ISO line is in good condition and is fully operational.

Year of construction: 2020, condition: ready for operation (used), Metal Band Saw manufactured in 2020. This BOMAR Extend 800.620 ANC 2500 features a hydraulic bundle clamping system and a mist lubrication system for efficient operation. It includes a laser alignment line and adjustable vise clamping pressure for precision cutting. The machine comes with selected accessories such as material stop systems and height-adjustable roller conveyors. If you are looking to get high-quality sawing capabilities, consider the BOMAR Extend 800.620 ANC 2500 machine we have for sale. Contact us for further details. • Saw blade deviation monitoring • Hydraulic bundle clamping system • Micronizer – mist lubrication system (24V unit) • Laser Liner – laser alignment line • Adjustable vise clamping pressure • Hydraulic saw blade tensioning • Version with 54 mm saw blade • Version with 5.5 kW drive motor • Digital display for saw arm descent speed (feed rate) • Condition: Very good; used for about 6 months Additional equipment • Material stop system • Modification of the vise and top clamp at the machine’s exit side • Increased jaw height (500 mm) • Roller conveyors: • Infeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 8 m long • Outfeed roller conveyors (X850), height-adjustable 740–840 mm, non-driven, 6 m long Gsdpfx Ais Ai D Tfekebw

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, working width: 2,500 mm, overall weight: 50,000 kg, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, pressing force: 50 t, type of input current: three-phase, For sale is a GÉFI LE50/2500, Hungarian-made edge bender in excellent condition, in working condition, can be tested. Technical data of the pres brake : Manufacturer: GÉFI Type: LE 50/2500 Year of manufacture: 1983 Pressing force: 50 tons Gbodpfx Aijyznhleksw Maximum bending length: 2500 mm Dimensions: 2720x1550x2245 mm Weight: 5500 kg We are adding 1 1500 mm and 1 2500 mm knife, these need to be renovated.

Condition: used, Year of construction: 2015, Machine: Barida ICE 2500 Bottle neck freezer Gsdpfx Aj Aikrpjiksbw

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Gbsds Afnzhopfx Aikjw Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Water table – no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (ITHC) Workpiece collision protection (breakaway head) and sheet metal alignment via software Compressed air requirement: Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Gbsdpfxj Aivxke Aikew Cutting software 121126ä

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Godpfxs Ai I Ins Aikobw MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons