Used Belt Grinder for sale (11,783)

Condition: excellent (used), Year of construction: 2017, FINTEC BELT GRINDER MODEL 131 Description Details Location Request Info FINTEC BELT GRINDER MODEL 131 MACHINE IN AS-NEW CONDITION Gelhcdswyd A Njw Nebp YEAR 2017, CE CERTIFIED, VERY LITTLE USED. Complete with extraction system. Dual speed. Grinder for welded corners; fast and efficient cleaning of welds in angles on rectangular pieces such as worktops and boxes, with welded corners up to 145 mm in height. It can also produce radii on flat parts of the same height or on stacks of pieces. The patented radius-forming system is adjustable, allowing for edge radii from R=1 to R=10, or for sharp edge finishing. The large worktable, adjustable in both height and inclination, can accommodate abrasive belts of widths suitable for the height of the piece; the worktable stops ensure accurate radius forming. The self-filtering extraction unit is equipped with a cyclone for mechanical dust suppression. Abrasive belt size: 2000 x 150 mm Roller size: 50 x 150 mm Belt cutting speed: 24/12 m/sec Worktable size: 600 x 250 mm Maximum overall dimensions: 910 x 1330 x 1560 mm Approximate weight: 120 kg

Condition: excellent (used), CATALOGUE NUMBER 6985 TECHNICAL DATA - max. width of the processed element 300mm - height of the processed element 200mm - aggregate: grooved rubber roller + shoe + metal roller - work table 1230x440mm - belt 300x1900mm from above: - rubber, sliding roller - aggregate approx. 7.5kW - sliding, rubber roller from below: - pulling belt - pneumatic oscillation - 2 types of feed speed - feed motor 0.85kW - diameter of the extraction nozzle 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530kg - unpainted - used grinder Gbololvtm Sjhcdw Njp - very good condition good Net price: PLN 13,900 Net price: EUR 3,280 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Year of construction: 2009, Condition: new, belt dimensions 2000x100mm Gslhcdwex Dave Nobp Belt speed 30m/sec Angle adjustable from 30 to 90 Power 3kW 4000V50Hz Weight 200kg Rollers for grinding rye 3/4";1/2"; 1"; 11/4"

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 Gjlhcjth R Tljdw Nsbp With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: good (used), Code: 0098 Gjlhcdjwd Hafow Nsbp Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: used, Year of construction: 1995, machine/vehicle number: 41150211, Lg.No. 25050 Technical data: Gslhcdwsv E Idcs Njbp - Sanding belt dimensions 2000 x 150 mm - Surface sanding opening 530 x 150 mm - Sanding belt speed 34 m/s - Contact disk B 150 / D 200 - Drive disk B 150 / D 200 - Drive 400 V / 2880 rpm / 4 kW - Working height adjustable 475 - 1240 mm - Space requirement approx. W 580 x H approx. 1250 x D 1000 mm - Weight approx. 110 kg

Year of construction: 1983, Condition: not inspected (used), MAFAC N350 Belt grinder -WKG 567- Offered here is a grinding machine from the company Mafac. Technical data: Manufacturer: Mafac Gelhjhh A I Dscdw Nobp Type: N350 Year of manufacture: 1983 belt size: 350 x 2800 mm Belt speed: 4 - 28 m/s Connected load: 10,2kW 380V 50Hz Ex-proof machine with wet grinding device for grinding, deburring, fettling and polishing

Condition: excellent (used), CATALOG NUMBER 7324 Technical data: - max. width of the processed element 200mm - max. height of the processed element 190mm 2 grinding units: - metal roller + shoe + metal roller from above - metal roller + shoe + metal roller from below from above: - 2 pressure rollers, rubber, pulling - grinding unit - sliding roller - 2 pressure rollers, rubber, pulling from below: - grinding unit - side guide strip - electrically adjustable grinding height 0.37kW - 6 types of feed speed + right/left 2.25; 4.5; 9; 12.5; 18; 25m/min - feed motor 0.6kW - main motors 2x4kW - diameter of exhaust ports 80mm, 90mm - overall dimensions length/width/height 1830x860x1760mm - weight 630kg Gelhjvt Alwecdw Nsbp - unpainted - used grinder, very good condition Net price: PLN 12,500 Net price: EUR 2,950 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: like new (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 0760-00039, The machine can be seen in our plant in Bulgaria. Gjlhjtqfc Tocdw Nebp

Condition: new, WBG75 - ROGI belt sander 400V - 3 Phase Sanding belt ----- 75 x 2000 mm Belt speed ----- 33 mtr/s Motor ----- 3 KW Weight ----- 115 KG Golhsga T Ayscdw Nebp INCLUDED * Robust undercarriage * Sanding belt

Condition: good (used), Functionality: fully functional, Metal belt grinder Gbjljq R Uzhjhcdw Nsp Grinding length 7700 mm Grinding width 2600 mm Sanding height 200 mm Sanding belt dimensions 18700 mm long

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0810317, Offer 24325 Metal belt grinder + pipe and cylindrical grinding machine Technical data: - Sanding belt dimensions 2000 x 70 mm - surface grinding opening 430 x 75 mm Gbsljuccppjhcdw Njp - Possible tube + shaft diameter 10 to 100 mm - Adjustment of the contact wheels via hand wheels - Contact wheel B 75 / D 200 mm - Drive wheel B 75 / D 200 mm - Belt adjustment - Grinding belt speed 30 m/min - Drive 400 V / 4 kW - Space requirement approx. W 800 x H 1250 x D 1000 mm - Weight approx. 150 kg

Condition: used, Radius belt grinder Pipe grinder ALMI type AL 100 U-01 Belt grinder, belt sander Serial no.: Year of construction 2007 Gbelhcdoru Tttow Njp Sanding belt dimensions 100 x 2000 mm Motor speed 2900 rpm Drive power 3 kW Mains connection 400 Volt, 50 Hz - Clamping vice infinitely adjustable at an angle of 90° to 30° to the sanding roller - for pipes from Ø 20 to Ø 76 mm - built-in contact roller for pipe diameter 42.5 mm - 1 contact roller for pipe diameter 28 mm - 1 contact roller for pipe diameter 33 mm - Additional contact rollers can be easily manufactured by the user, rotating part with ball bearing right and left - Feed movement for pipe grinding via hand lever - Surface grinding table 400 x 100 mm with metal cover to swing open - Connection for dust extraction Ø 80 mm Operating instructions Space requirement L x W x H 1400 x 650 x 1150 mm Weight 180 kg Very good condition

Condition: good (used), Year of construction: 1990, Functionality: fully functional, workpiece length 2600 mm workpiece width 800 mm 4kW motor left and right rotation table adjustment up/down belt width 150 mm Gbslhcdwsqwfvbs Nop exhaust diameter 120 mm weight about 800 kg

Condition: excellent (used), Year of construction: 1992, Technical data : Sanding belt speed 25 m/sec. Grinding width 190 mm Grinding thickness 4 - 180 mm Shortest workpiece length 280 mm Feed speed continuously adjustable 5 - 25 m/min. Sanding belt dimensions 200 mm width, 1850 mm length Electrical equipment according to VDE Electrical connection 380 V., 3/N, 50 Hz. Pneumatic connection R 3/8", 6 bar, 80 NL Total connected load approx. 26 kW (at maximum load) =Grinding units 4 x 5.5 kW =Brushing and finishing device 2 x 0.75 kW =feed 1.1 kW =central height adjustment 0.55 kW =Height adjustment Inlet table 0.06 kW =Grinding belt utilization oscillation 0.12 kW Exhaust air volume 3 x at least 2500 m³/h, 20 - 25 m/sec. Suction connection piece 3 x 180 mm diameter, at the top of the machine housing External dimensions 2450mm width 1900mm height 1200mm depth Working height 830 mm Weight: approx. 4200 kg ----- Description: Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry Golhcdwjv Rb Uro Nsbp - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped.

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm Gelhcdst Stfhsw Nsbp - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation Gbjlhcdwjt Hmg Is Nop * grinding belt blowing

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° Gbjlhet Uzxnecdw Njp - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm

Condition: used, Year of construction: 1994, machine/vehicle number: 941822, Offer no. 24266 Technical data: - Sanding belt dimensions 3500 x 75 mm - 2 sanding belt speeds - adjustable contact wheels / sanding rollers - mot. Grinding attachment for external pipe grinding - speeds 1500 / 3000 rpm - Suction pipe for connection to central suction system Gelot Er I Ushcdw Nsbp - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 900 x H 1650 x D 1700 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1996, Offer 24337 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. Gbslhcdovbfh Rew Nop - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - various contact rollers

Condition: used, Year of construction: 2002, machine/vehicle number: 2204, Universal radius metal belt grinder lot no. 24541 Technical data: Gboloviudqjhcdw Nep - Sanding belt dimensions 2000 x 75 mm - Surface sanding opening 400 x 75 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Working height 960 mm - various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Condition: good (used), Year of construction: 2017, machine/vehicle number: 13289, Offer 24575 Technical data: - Sanding belt dimensions 2000 x 70 mm - Surface sanding opening 430 x 75 mm - Sanding belt speed 33 m/sec - Contact disc B 75 / D 200 - Drive disc B 75 / D 200 - Drive 400 V / 2880 rpm / 3 kW - Working height adjustable 475 - 1240 mm - Motorized dust extraction - Space requirement approx. W 800 x H approx. 1250 x D 1000 mm - Weight approx. 120 kg Golhcdwjvzxczo Njbp

Condition: used, Year of construction: 2012, operating hours: 2,143 h, Type of fuel: Diesel Year of manufacture: 2012 Colour: Orange Field of application: Agriculture Drive: Track Empty weight: 19.500 kg CE mark: yes Doppstadt DW 2060K. Year: 2012. Hours: 2143. Weight: 19.500 kg. Gbolhcdowl Nk Now Nep CE Machine. Magnetbelt. 2 way convenyor. Pads: 400 mm. UC: 80%. Radio Remote Control. ID NR: 240. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2001, Knopp / Duplokant S3 Gelhcovy Dt Aedw Nebp Year 2001 - 2020 GMR recon S-ABT-148

Condition: excellent (used), Contact wheels for belt grinders from FICARD - Friedrich August Picard Wheels suitable, among others, for grinders such as GREIF or METABO 2 wheels with the following sizes: No.1 – wheel with rubber coating - 450 mm diameter - 50 mm wheel thickness - 32 mm bore diameter - SH 65 hardness No.2 – wheel with foam coating - 400 mm diameter - 50 mm wheel thickness - 32 mm bore diameter Golhcdwowt Akrs Njbp - SH 25 hardness