Used Fiori Db 250 S for sale (29,654)

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-250-FN-EC, input voltage: 230 V, overall weight: 35 kg, total width: 430 mm, total length: 340 mm, total height: 600 mm, volume flow: 250 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filter device (soldering smoke) for up to 2 workstations Type: 250 FN Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating soldering smoke. TECHNICAL DESCRIPTION: Air volume: - 240 m³/h (volume flow) - 170 m³/h (effective air output) (depending on the filter configuration without collection elements) Intake nozzle: 2 x NW 50 mm (rear) Filter configuration: - Pre-filter G4 - HEPA filter H13 - Activated carbon cassette (2.5 kg, refillable) Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Hnsdevrylfepfx Ag Ujg Fan technology: energy-saving EC technology Air output: not adjustable Dimensions: length 340 mm / width 430 mm / height 600 mm Weight: 35 kg

Condition: used, Year of construction: 2007, 106 369-11 bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t Hsdewizn Uopfx Ag Usng +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor Hnodpfx Ajx Tbk Dsg Uog • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Hnjdpfx Agox T Acuj Uog Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, mileage: 585,975 km, power: 448 kW (609.11 HP), first registration: 09/2007, fuel type: diesel, axle configuration: 8x4, next inspection (TÜV): 02/2022, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, spoiler, traction control, Mercedes-Benz ACTROS 4160 S 8x4/4 WSK *250 TONS*  WSK = torque converter clutch  Maximum semi-trailer weight: 250 TONS!!  Engine: V8 (15928 cc) / Type: OM 502 LA / 600 PS/HP (448 kW) BlueTec EURO 5 Gearbox: G 240-16/11.7-0.69 Gears: 16 (forward) Gearbox: manual gearbox / hydraulic gearbox shift Clutch: WSK - torque converter clutch Technical maximum weight: 41,000 kg Hnjdoi Idwhepfx Ag Uog Repair history according to previous owner: -- NEW GEARBOX incl. WSK (2019/2020) -- NEW CLUTCH, complete clutch incl. flywheel (2019/2020) -- NEW HPS SHIFT CYLINDER, both cylinders (HPS = hydro-pneumatic shift) -- NEW SENSOR DEVICE = gear shift at the gear lever -- NEW INJECTORS (2019/2020) / already changed twice -- NEW TURBO -- NEW COMPRESSOR Maintenance intervals according to previous owner: -- at least once a year all NEW OILS -- every 2 years NEW COOLANT and AIR CONDITIONING GAS LEAF SUSPENSION LEAF AIR / STEERING AXLE LEAF LEAF -- Vehicle from 1st hand! -- Austrian vehicle! / AUSTRIAN TRUCK! Special equipment: - WSK torque converter clutch - steerable LEADING AXLE - HYDRAULIC SYSTEM - KNBN HYDRAULIC SYSTEM for trailer steering - ENGINE BRAKE with CONSTANT THROTTLE - Main tank behind driver's cab 900 liters aluminum - Frame reinforcement - Differential lock - Telligent braking system with ABS and ASR - Electrical connection for additional consumers - AdBlue tank 95 liters - Fifth wheel coupling JOST JSK 38G-1 H=290 mm - Sliding device JOST EV HD 800 height 57mm 36 t - Beading plate for trailer piston - 3x work lights at the top rear of the driver's cab - Rotating light bar - Brake and electrical connections, high -- Compressed air filling connection, front -- Compressed air tank, aluminum -- Electric pop-up roof (lifting roof) -- Parrot mobile hands-free system -- CD radio -- Multifunction steering wheel -- Tinted windows, without band filter -- Burl wood decor, driver's cab -- Comfort driver's cab suspension -- L-shaped driver's cab -- Sun visor -- AIR CONDITIONING -- Additional thermal insulation -- Auxiliary heating, Webasto Air Top 2000 -- Compressed air horns on the driver's cab roof -- Automatic daytime running lights -- Halogen fog lights -- Electrics for third-party bodies -- Increased engine cooling capacity -- POWER TAKE-OFF -- Driver's comfort suspension seat -- 2x BED -- L Low noise -- Air intake rear top TIRES 1+2 axle: 385/65 R22.5 3+4 axle: 315/80 R22.5 -- etc. ….. EXPORT PRICE! for more info: Mobile phone: Would you like to visit us? We offer a free pick-up service from the train station in 4020. Will you take care of everything for you with the used vehicle? If you agree, we will be happy to accept this offer. This offer is non-binding and subject to change. Errors and prior sale reserved.

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Hnodpfxjx D Rqre Ag Ujg Injection Moulding

Condition: used, Technical details: Hnjdpew Au I Isfx Ag Ujg max. ram stroke: 250 mm workpiece diameter - max.: 80 mm max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Feed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor with new bearings. Hedpfx Agjuqyr Ej Ueng Chassis, hydraulic unit, complete with control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t

Condition: excellent (used), Year of construction: 2002, Arburg 270 S-250 - 60 Clamping force: 25 tons Year of manufacture: 2002 Tie bar spacing: 27 x 27 cm Control system: S Hsdpjx I Rdvofx Ag Usng Includes conveyor belts

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW Hsdpfx Agjxak H Se Usng weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Hjdpfx Aokvnc Seg Ueng Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, Hydraulic mandrel bending machine with many accessories Hsdpfx Asq Daxteg Usng Preselection of 8 different bending angles with digital display Digital length display and digital display of twist Max. usable length: 6096 mm Round steel tube (S 235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square steel tube: 50 x 50 x 4.0 mm Rectangular steel tube: 60 x 40 x 2.0 mm Max. bending angle: 180° Weight: approx. 1800 kg

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Hedpfoi Eac Nsx Ag Ueng

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Hedpfx Agowz R Iuo Ueng Freight basis: ex-works

Condition: new, empty load weight: 614 kg, maximum load weight: 1,386 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,530 mm, loading space width: 1,550 mm, total length: 1,630 mm, total width: 990 mm, total height: 3,930 mm, suspension: steel, tire size: 165R13C 96/94N, This tipper has a frame construction with a closed profile, which increases its stability. It uses a 5-stage cylinder which enables a larger tipping angle (up to 55°). All side walls can be opened and removed. The model also has a steel floor. | KIPPER 250/2 C S 2T Reversible tipper | Galvanized frame | Lockable storage shaft for 2 access ramps incl. ramps Ramps (L:243cm, W: 30cm) | Loading area dimensions: L: 2.53m W: 1.52m Dropside height: 0.40m Loading height 0.70m | 4 lashing rings (2 left, 2 right) recessed in the floor | Knott axle with drum brake | Leaf suspension | Operating voltage 12V | Spindle parking brake | Errors excepted. Hnedpfx Aou R D Sdog Ueg

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW Hedpjxaa Aijfx Ag Ujng voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load Hjdpfxjv A Uw De Ag Uong 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Hjdpfopz Hubsx Ag Uong - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: excellent (used), Year of construction: 2004, Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Hjdoxl Tp Tspfx Ag Usng Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Hedpewlkcajfx Ag Uong

Year of construction: 2013, condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Hnsdpfx Agstyax Ee Uog

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Hnedsrxu Erspfx Ag Uog Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, functionality: fully functional, empty load weight: 468 kg, maximum load weight: 1,532 kg, overall weight: 2,000 kg, loading space length: 2,530 mm, loading space width: 1,640 mm, loading space height: 300 mm, Year of construction: 2025, New series of rear tippers! Tandem axle, braked rear tipper high-loader with aluminum drop sides, foldable and removable on all sides, steel sheet floor, welded, hot-dip galvanized steel frame, with hydraulic hand pump, jockey wheel, 6 lashing rings as standard. Plus freight costs to Gera and vehicle registration document 200 € net. Hsdow A I Etjpfx Ag Usng Optional accessories available for an additional charge: electric control, mesh sides, tarpaulin and frame, 100 km/h equipment, etc. Financing / leasing available. Images are for illustration purposes, shown with optional accessories at extra cost!!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tonnes Hjdpexgiaqefx Ag Uong Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 ccm Shot weight: 36 g for PS Equipment: conveyor belt, manipulator, core pull, Euromap After full inspection!

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Hodjhzr U Ijpfx Ag Usng Housing size: 3500 x 1000 x 2200 mm