Used Roadtec Sb 2500 for sale (4,441)

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Gedpo Agb Dzjfx Aikebw Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: excellent (used), Year of construction: 2020, This NTX 2500/1500 Second Generation is a fully equipped turn-mill center featuring a separate milling spindle and B-axis, designed for more complex 5-axis machining operations. Spindle hours: ca 7800h Control unit Fanuc F31iB5 with CELOS Ergoline (NTX Gen2) XYZ Travel 675 mm (-125+500) x 300 mm (±150) x 1562 +164mm for ATC Turning length 1530 mm Turning diameter 670 mm B-axis 240°(±120°) Main spindle speed 4000 rpm Through spindle hole 91mm Sub-spindle speed 4000 rpm Main spindle chuck 304mm (KITAGAWA B212) Sub-spindle chuck 304mm (KITAGAWA N-12A) Tool spindle speed 12000 rpm Toolchanger 76 ATC Spindle taper CAPTO C6 Machine weight 18160 kg Machine Height 2750 mm Machine floor space 6250 x 2830 mm Including: Renishaw RMP60 workpiece measuring system Tool presetter Chip conveyor Automatic Centering Steady Rest SMW Mist collector Interlit-TMF300/600 compact filter unit 70 bar Paper belt filter TMF300, tank volume 600L high pressure pump 70 bar - 32 L/min Workpiece unloader, conveyor and stocker Etc. Full technical description and options in the attached document. Machine can be viewed in operation upon appointment. Available for immediate delivery. Gedpfx Ao Afnzheikobw Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, - washing machine - assembly station Gjdpfo Ah Rc Nox Aikjbw - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table - year: 2006 - line length: 16.5 m - direction: right-left The ISO line is in good condition and is fully operational.

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 03/2017, loading space length: 10,520 mm, loading space width: 2,460 mm, loading space height: 2,630 mm, total length: 10,790 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,050 mm, color: red, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Weights Empty weight: 6.980 kg Carrying capacity: 18.020 kg GVW: 25.000 kg Gbsdpfx Aie Ai Ew Djksw Functional Tail lift: Dhollandia DHLM.30, tail lift, 2500 kg Maintenance APK (MOT): tested until 04/2027 History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Router 1Kw Gjdpfxszu Av Ue Aikebw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 100 mm Shelf dimensions: 1000 x 2500 mm Clearance: 400 mm Gsdpe Airgdefx Aikobw Hydraulic clamping Engine power: 3 kW Power supply: 380 V Overall dimensions: Length: 2900 mm Width: 1200 mm Height: 2000 mm

Condition: used, Year of construction: 2003, operating hours: 56,616 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 3,000 m/min, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 770 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, nominal power (apparent): 40 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, table width: 1,000 mm, table height: 950 mm, table length: 3,220 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 8,000 rpm, overall weight: 21,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 40, tool length: 380 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this used Hedelius BC100-2500 vertical machining center, manufactured in 2003. Key data: Gbjdpfx Aisz H Hwkokjw Manufacturer: HEDELIUS GmbH Type: BC 100/40-2500 Year of manufacture: 2003 Power requirement / voltage: 40 kW / 400 V / 50 Hz (40kVA) Total weight: 21000 kg Space requirements: Length: 6.50 m Width: 4.00 m Height: 3.70 m Control system: Program input: HEIDENHAIN Control: iTNC 530 NC software version: 340422 11 SP5 PLC software version: BC100_V1.2 Operating hours: Control on: 67335 Machine on: 56616 Program runtime: 18289 Travel distances: X-axis: 2500 mm Y-axis: 1000 mm Z-axis: 770 mm Feed rate: X-axis: 3000 mm/min Y-axis: 3000 mm/min Z-axis: 3000 mm/min Rapid traverse: 3000 mm/min Workpiece clamping area - fixed machine table: Length: 3220 mm Width: 1000 mm Work table: T-slots: DIN 650 Slot width: 22 mm Slot spacing: 200 mm Number: 5 Table height: Fixed machine table: 950 mm Tool magazine: Magazine capacity: 40 positions Max. tool diameter: Ø 80 mm (with available empty slots): Ø 125 mm Max. tool length: 380 mm Max. individual weight: 15 kg Total magazine weight: 600 kg Spindle: Speed range: 30 – 8000 rpm Mount: SK 40 Special accessories: Scraper belt conveyor: AME GmbH Total length: ≈ 6660 Height: ≈ 1760 Depth: ≈ 740 Belt filter system: (High-pressure coolant system) Model: PS 120 Tank capacity: 780 l Output: 120 l/min Filter fleece: 670 mm 100 m on roll Length: ≈ 2320 Height: ≈ 1060 Depth: ≈ 850 Control cabinet - cooling unit: Manufacturer: Pfannenberg Type: DTS 7241 Model No.: 217943 Wireless measuring probe: Manufacturer: HEIDENHAIN Model: TS 632 Type: Infrared measuring probe Mount: SK 40 If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2016, Machine No. 14, Serial No. 238835, Arburg Selogica control system, clamping force 2,500 kN, screw diameter 45 mm, handling system, manufacturer Arburg, type Multilift Select, year of manufacture 2016, travel distances X/Y/Z 700 x 1,200 x 2,400 mm, safety enclosure, handling robot, manufacturer Kuka, type KR10R1100, year of manufacture 2016, serial no. FA2686, 2 conveyor belts, manufacturer Schuma, L/W approx. 2,000 x 800 mm. Gbedpfx Aiez H N H Iskew

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Water table – no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (ITHC) Workpiece collision protection (breakaway head) and sheet metal alignment via software Gjdps Aivxkjfx Aikebw Compressed air requirement: Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting software 121126ä

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 840, Of course, again in the same style: NS LMD2500 wide belt sanding machine – year of manufacture 2009 For sale: NS LMD2500 wide belt sanding machine, year of manufacture 2009. Professional industrial wide belt sanding machine from NS Máquinas, suitable for sanding and finishing metal workpieces. A reliable machine for leveling, grinding, and finishing surfaces, among other applications. The machine was used in our production process and is being offered for sale due to the cessation of our business activities. Machine specifications: - Brand: NS - Type: LMD2500 - Year of manufacture: 2009 - Wide belt sanding machine - Suitable for metalworking - For grinding, sanding, and surface finishing - Robust industrial design Gedpfsz H Rckox Aikobw - Includes: [optional accessories / extraction system / sanding belts] The LMD2500 is suitable for manually and precisely finishing larger metal parts and offers a great deal of flexibility for various workpieces and finishes due to its long sanding belt. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical information are available upon request. If you have more machines, please send them along with the brand, type, and year of manufacture. This will allow me to maintain exactly the same advertisement structure for all TOWA machines.

Condition: used, Year of construction: 2005, Control: FANUC 18-iTB Options: Interface for bar feeder magazine Part catcher for turned parts, max. part length 120 mm and ø 65 mm incl. part conveyor belt, on the right-hand side outside the machine M-function for opening and closing the chuck internal coolant supply to the subspindle with ejector hinged belt chip conveyor, on the right-hand side, without chip cart Gedpfx Aie Ai Eatokebw Bar loader FMB Turbo 5-55

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Extras: Includes seven extra screens Gedew R Un Aopfx Aikobw We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm. Gedpfx As Agbi Djikobw

Condition: used, Year of construction: 2011, operating hours: 35,200 h, clamping force: 250 kN, displacement volume: 664 cm³, injection pressure: 2,000 bar, overall weight: 12,500 kg, screw conveyor diameter: 60 mm, terms of delivery: FCA Pegnitz delivery time: on request Gedpfx Aie Ai Uauoksbw terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2015, Machine: Barida ICE 2500 Bottle neck freezer Gsdj Aikrpepfx Aikobw

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Motor output 4,0 kW Gsdpfxoz E Sv Ne Aiksbw Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,904 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, controller manufacturer: MITSUBISHI, controller model: M730UM, number of slots in tool magazine: 12, number of axes: 5, This 5-axis DMG MORI MORI NLX 2500/700 SY was manufactured in 2023. It features a turning length of 700 mm and a powerful main spindle with a maximum speed of 4,000 rpm. The machine is equipped with a 12-station turret and integrated automation for efficient parts handling. If you are looking to get high-quality turning capabilities, consider the DMG MORI MORI NLX 2500/700 SY horizontal turning machine we have for sale. Contact us for further details. Gbjdpfxjzy N Nls Aikjw - Control Unit: MITSUBISHI M730UM with CELOS (MAPPS V) on 21.5-inch Multi-Touchscreen ERGOline Touch- Turning Length: 700 mm- Main Spindle (Spindle 1): 18.5/18.5/15 kW (25% ED/50% ED/cont.), 4,000 rpm, JIS A2-8 spindle nose, Ø91 mm spindle bore- Main Spindle Chuck: 10" Hydraulic 3-jaw chuck (Kitagawa BR10A821, Ø254 mm) with hollow clamping cylinder (Ø80 mm bar passage)- Counter Spindle (Spindle 2): 11/7.5 kW (25% ED/cont.), 6,000 rpm, JIS A2-5 spindle nose, Ø43 mm spindle bore- Counter Spindle Chuck: 6" Hydraulic 3-jaw chuck (Kitagawa BR06A521E, Ø170 mm) with full clamping cylinder- Turret: 12-station BMT60 turret with 10,000 rpm driven tools (5.5/5.5/3.7 kW power, 40/30/14 Nm torque)- Y-Axis Travel: ±50 mm (Rapid traverse 10 m/min)- X-Axis Direct Measuring System: Magnetic linear scale system (0.01 µm resolution)- Tool Setter: Manual swing-type tool presetter for Spindle 1 and removable tool presetter for Spindle 2- Automation & Parts Handling: Integrated parts catcher for main/counter spindle (up to Ø80 mm x 200 mm, 3 kg max), workpiece discharge conveyor belt, pneumatic workpiece ejector (Spindle 2)- Bar Feeder & Interface: Bar feeder interface (multi-brand) with Top Automazioni X-Files 380M 3m bar feeder (80 mm max bar diameter)- Coolant & Filtration System: Hinge-belt chip conveyor (right side discharge), 0.8 MPa high-pressure coolant pump, INTERLIT pump unit with 15 bar high-pressure pump & double cartridge filter, coolant gun- Auxiliary Equipment & Interfaces: Oil mist collector interface (Ø150 mm port), 3-phase autotransformer (45 kVA, 400V/200V, 50 Hz), double foot switch for chuck operation- Machine Operating Hours (from HMI readout):- Machine Power-On Time: 8,120 hours- Program Run Time Head 1: 3,751 hours- Cumulative Cutting Time Head 1: 1,904 hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Gsdpszutixsfx Aiksbw Machine in good working condition. Capacity: 30 mm steel x 2500 mm.

Condition: used, Year of construction: 2018, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Godpfx Aez R A Nrjikobw

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2015, total length: 13,630 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,950 mm, color: white, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 9.400 kg Carrying capacity: 31.600 kg GVW: 41.000 kg Functional Tail lift: Dhollandia DHLM.30, tail lift, 2500 kg Gbjdpfx As Ahykgjikew Make of bodywork: Krone Coolliner Isolated Box History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: moderate Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, The Nagema FBFC/1 is a heavy-duty, industrial Continuous Butter Making Machine (CBM) engineered for the commercial dairy sector. Manufactured by the historic German engineering brand Nagema, this machine processes bulk cream into high-quality butter via a fully continuous automated cycle. A detailed technical breakdown of the machine's specifications and functional systems is outlined below. ----- Technical Specifications - Production Capacity: Up to 2,500 kg/h of finished butter output. - Raw Material Suitability:Sweet / Cultured Cream: 45% to 50% fat content. - Sour Cream: 38% to 42% fat content. - Dimensions: Approx. 390 cm (Length) × 100 cm (Width) × 255 cm (Height). - Total Machine Weight: Approx. 3,100 kg. - Main Drive Motor (Beater): 22 kW to 30 kW operating at 650 to 1,950 rpm (manually adjustable via an external handwheel or modernized variable frequency inverter). - Auxiliary Drives:Auger feeder motor: 0.4 kW (925 rpm). - Raw material pump engine: 1.1 kW (2,760 rpm). - Water pump motor: 1.1 kW (2,760 rpm). - Integrated Centrifugal Pumps: 2x Nagema pumps with a maximum capacity of 13 m³/h. - Electrical Parameters: 380V / 50Hz, 3-phase power supply. ----- Structural Design & Materials - Hygienic Construction: All areas that come into contact with the product are made entirely of premium stainless chromium-nickel steel to satisfy strict food safety regulations. - Frame: Heavily reinforced painted steel, cladded completely with a stainless steel outer shell. - Controls: Simple, user-friendly control interface deployed directly on the machine body. Modernized variations often feature integrated variable frequency drives (VFD/Inverters) for smooth, digital speed management of the main churning drum. ----- Step-by-Step Functional Sections The FBFC/1 achieves continuous production by arranging its mechanical processes sequentially within its horizontal frame: [[1]()] Gjdpfxsz S Ni Ue Aikjbw - The Churning Cylinder (Beater): Cream is continuously pumped into the front end of a cooling-jacketed cylinder. Inside, the high-speed rotating beater strikes the cream forcefully. This mechanical action rapidly disrupts the fat globule membranes, reversing the emulsion to separate raw butter grains from liquid buttermilk. - Separation and Additional Churning: The resulting mix moves into a designated separation block. The buttermilk is systematically drained and collected by integrated centrifugal pumps, leaving behind a concentrated formation of pure butter granules. - The Kneading Zone: Dual counter-rotating augers push the raw butter grains forward. This mechanical kneading forces out remaining pockets of buttermilk moisture, tightly binds the butter matrix, and distributes water particles evenly. This process ensures the exact moisture profile (ranging from 16% to 25% based on settings) before the final product exits the machine. - Outfeed Distribution: The dense, finished butter is continuously extruded from the mouthpiece, frequently feeding directly into bulk packing systems or automatic wrapping machines. Technical Data & Specifications - Machine Type: Semi-automatic auger-fed system - Maximum Output: Up to 150 to 151 cartons per hour (depending on operator speed) - Product...

Condition: ready for operation (used), Year of construction: 2024, pressing force: 64 t, CNC Press Brake manufactured in 2024. This DAMAMT WC67K 63T/2500 CNC features a pressing force of 63 tons and a bending length of 2,500 mm. It includes advanced CNC control with 4+1 axes and motorized V-axis crowning for precision bending. If you are looking to get high-quality bending capabilities, consider the DAMAMT WC67K 63T/2500 CNC Press Brake we have for sale. Contact us for further details. • Inspection possible: Yes, in Bulgaria • CNC control • Control system: E-Touch ET18 (E-Touch 18) • Programming: 2D graphical programming, CAD import, offline programming • Remote assistance: Yes • Automatic bending-process calculation: Yes • CNC axes: 4+1 (Y1, Y2, X, R + V motorized crowning) • Main technical specifications • Distance between columns: 1,980 mm • Throat depth: 300 mm • Ram stroke: 160 mm • Maximum open height: 370 mm • Repositioning accuracy: ±0.05 mm • Fast approach speed: 200 mm/s • Bending speed: 10 mm/s • Return speed: 180 mm/s • Main motor power: 7.5 kW • Axes / backgauge • Y1/Y2: Fully synchronized • X-axis: CNC controlled • R-axis: CNC controlled • V-axis: CNC motorized crowning • Backgauge: Servo controlled • Main components • Hydraulic system: Bosch Rexroth • Main motor: Siemens • Electrical components: Schneider Electric • Ball screws / linear guides: HIWIN • Linear scales: GIVI (Italy) • Tubing / connectors: EMB (Germany) Gedpfxjzu Swno Aikebw • Sealing rings: NOK (Japan) • Hydraulic pump: Sunny (USA) • Safety and compliance • Motor overload protection • Electrical leakage protection • CE safety standard Additional equipment • 1 set upper punch (heat-treated 42CrMo) • 1 multi-V lower die (heat-treated 42CrMo) • Quick-release upper tool clamps • 2 front support arms • Foot pedal with emergency stop • Safety fence Technical Specification Bending Length 2500 mm

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 609102.190467.124622, input voltage: 400 V, warranty duration: 6 months, overall weight: 225 kg, control voltage: 24 V, nominal power: 0.9 kW (1.22 HP), input frequency: 50 Hz, input current: 10 A, year of last overhaul: 2026, used bread slicer Treif Diskus SB, overhauled, blade sharpened, weight 225 kg, year of manufacture 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 PS Gbjdoz Sdq Iopfx Aikew

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 Gsdpfxjzy Hx De Aikjbw MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Gbsdpjzr Tw Defx Aikow Magni hydraulic telescopic boom JT 2500 I / 2.5 tons / suitable for RTH & TH series / year of manufacture: 2023 / NEW unit / in stock & immediately available Price: €7,890.00 net / €9,389.10 gross - Max. lifting capacity, retracted: 2,500 kg - Max. lifting capacity, extended: 1,500 kg - Length, extended: 2,690 mm - Length, retracted: 1,790 mm - Automatic attachment recognition: yes This attachment is suitable for the RTH and TH series. Product code: ATT-04-021 We have many other attachments for Magni in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Errors and prior sale excepted! Internal ID: 022235 = More information = Year of manufacture: 2023 New: Yes Please contact Marius Herden for further information.