Used Resistance Soldering for sale (2,109)

Condition: used, Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclic loads and accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving basket Load capacity of the moving basket: 50 kg for VT3 7012 S2 All-round grid in the moving basket secures the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Djdpfxsx Exmte Ab Ajcp Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Cooling unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation Temperature range Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_ 2 K in the steady state in the moving basket Heating rate warm chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate warm chamber: K/min Viewing window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2026, condition: used, Year of manufacture: 2026 New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Dcedpeznr Dbsfx Ab Aep Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey-black, overall weight: 2,500 kg, maximum load weight: 3,000 kg, empty load weight: 3,000 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,800 mm, machine/vehicle number: Wohncontainer PRESTIA, Equipment: bathroom, cooling unit, hot water, shower, WOHN – Model PRESTIA Living comfort at the highest level | 300 × 700 cm Experience a new generation of living containers – designed with the clear goal of not feeling like a container, but like a real home. Our ready-to-deliver models can be viewed on-site and represent the highest quality, modern design, and maximum flexibility. This model combines sophisticated engineering with residential aesthetics – creating a lifestyle usually found only in traditional homes. A real home feeling – not a container Thanks to fully integrated concealed installations, multi-layer wall structures, and large floor-to-ceiling windows, the space feels bright, open, and premium. ⸻ Technical Details Dimensions: • Length: 700 cm • Width: 300 cm • Height: 280 cm • Weight: 2450 kg ⸻ Insulation & Construction • Facade cladding with elegant wood-look slats • Ceiling/Walls: 10 cm insulation (5 cm PUR + 5 cm rock wool) • Reinforced and robust base frame • 2 mm thick galvanized steel sheet • High-quality insulated glazing • Floor structure: 16 mm fiber cement board + parquet ⸻ Wall Structure & Workmanship – invisible quality Living Area: • Solid box profile substructure • 5 cm rock wool insulation within the profiles • Covered with high-quality white plasterboard • Finished with wallpaper ⸻ Sanitary Area (WC & Shower): • Robust box profile structure • Full rock wool insulation • Moisture-resistant green plasterboard • Waterproof PVC wall panels with marble look This construction ensures maximum protection against moisture while offering a luxurious appearance far beyond standard container solutions. ⸻ Equipment – thoughtfully designed Living Space: • Double glass door • Floor-to-ceiling window • Fixed floor-to-ceiling window Creates a bright and inviting atmosphere. Kitchen: • Real wood countertop • Two-burner cooktop ⸻ Bathroom – redefining luxury • WC with concealed cistern • Tempered glass shower cabin • Washbasin with cabinets Djdpfx Abszpfcge Aecp • Marble-look PVC wall covering Additional: • WC window • Instant water heater ⸻ Quality & Design • High-quality REHAU window systems • LED outdoor lighting • Color: RAL 7016 + wood-look facade ⸻ Conclusion More than a container – a complete living concept. A place that makes you feel: This is my home.

Condition: new, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our range of new vehicles, we offer you: TLF 4000 all-wheel drive with 5,000 liters of water on an off-road MAN TGM 18.320 all-wheel drive chassis. Our "Water Buffalo" on a MAN chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 hp (235 kW) • Automated transmission • Off-road tires • Matching single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Superstructure: • High-quality superstructure in a frame construction made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof Dodpfx Abozmyy Us Ajcp Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Performance 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam mixing system • Water tank 5,000 l with integrated foam tank 500 l • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure quick-attack system with 50 m kink-resistant hose • Foam/water monitor 2,000 l/min on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting: • LED light bar on the vehicle roof/2 LED front warning lights • Pneumatic special signal system Martin horn • Public address system 100 W with intercom unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, LDS Type: V870-640T Dodpfx Abjzd Slds Ajcp LDS Shaker Special Shaker Vibration testing: Shaker - Type V870-640T Testing for vibration and shock resistance during operation and transport. Determination of vibration-related material parameters. Application areas: Engine components, exhaust turbochargers, vehicle parts, electronic assemblies. Type: V870-640T Condition: used Scope of delivery: (See images) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions you may have by telephone.

Condition: excellent (used), mileage: 356,535 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 10x8, wheelbase: 7,200 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 10,250 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, power assisted steering, power mirror, traction control, - 4x4 - Aluminum fuel tank - Heated mirrors - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Cab - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Media system - Rotating beacon - Rear view camera - Sun visor - Power take-off (PTO) Dodpszzn Ehsfx Ab Aocp - Central lubrication system General information Year of manufacture: 2019 Registration number: 32-BNJ-7 Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Axle configuration Maximum front axle load: 10,000 kg Rear axle 1: Max. axle load: 10,000 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg Rear axle 3: Max. axle load: 11,500 kg Rear axle 4: Max. axle load: 11,500 kg Weights Unladen weight: 19,600 kg Payload: 30,400 kg GVW: 50,000 kg Functional Body manufacturer: RHINO REAR TIPPER WITH FLAPS 24.5 M3 Tipper: Rear Maintenance, history and condition APK (technical inspection): New TÜV upon delivery Technical condition: very good Optical condition: very good MAN TGS 50.500 10x8 BLH WS + RHINO 24.5 M³ HARDOX REAR TIPPER First registration: 08.04.2019 Registration number: 32-BNJ-7 Mileage: 356,535 km Drive: 10x8 Power: 500 hp Transmission: Automatic Cab: Day cab MOT / APK valid until: 06-2027 Available: 2 identical vehicles For sale is an exceptionally robust and well-maintained MAN TGS 50.500 10x8 BLH WS 5-axle truck, equipped with a robust RHINO 24.5 m³ rear tipper made of wear-resistant HARDOX steel. This vehicle was specifically designed for the most demanding tasks in the construction, earthmoving and transport sectors. Thanks to the powerful 500 hp engine, the 10x8 drive, the large wheels, and the hydraulically sprung and steered rear axles, this MAN offers excellent traction, stability and maneuverability - even under difficult operating conditions. CHASSIS & DRIVE * MAN TGS 50.500 * Heavy-duty 5-axle chassis * 10x8 drive * 500 hp * Automatic transmission * Large wheels / heavy-duty off-road version * Rear axles hydraulically sprung * Rear axle hydraulically steered * Excellent traction on difficult terrain * Very good maneuverability despite the 5-axle chassis * Central lubrication system * DIN mounting plate on the front of the vehicle * Rotating beacons RHINO 24.5 M³ HARDOX REAR TIPPER The vehicle is equipped with a very robust and heavy-duty RHINO rear tipper. * Volume approx. 24.5 m³ * Rear tipping * Tipping body made of wear-resistant HARDOX steel * Very robust and durable construction * Aluminum cover flaps * Suitable for intensive professional use * Suitable for heavy bulk materials * Ideal for earth, sand, stones, construction debris and other heavy materials The combination of the heavy-duty 10x8 chassis and the robust HARDOX tipper body makes this MAN particularly suitable for demanding earthmoving, construction and infrastructure work. CAB & EQUIPMENT * MAN day cab * Air conditioning *...

Condition: good (used), Complete used Tiflex textile screen printing setup for sale: a full manual screen printing line, ready to print t-shirts, sweatshirts, hoodies, polo shirts and garments with plastisol inks. This Tiflex screen printing equipment covers every step of the process: multi-colour printing on a 6-colour manual press, intermediate flash curing between colours, then final curing in an infrared conveyor dryer. A practical solution for textile decorators, garment printers, print shops, apparel brands and new screen printing workshops. 1. TIFLEX 2368000LC MANUAL SCREEN PRINTING PRESS (6 COLOUR, 6 STATION CAROUSEL) - Rotary manual press, 6 printheads and 6 stations - Maximum print area: 40 x 50 cm - Maximum outer screen frame size: 60 x 80 cm - Micro-registration with 3 knobs (X, Y and rotation) for accurate colour registration - Off-contact adjustment, screen/pallet parallelism and front/back pallet adjustment - Sliding pallets locked by ball plunger, rear screen clamping with anti-crush system - Pallet height: 86 cm, net weight: 200 kg - Fully manual, no electrical connection needed, dismantles for transport 2. 16 PALLETS INCLUDED (PLATENS) - 6 x men's XL pallets: 66 x 48 cm - 6 x women's M pallets: 50 x 32 cm - 2 x children's S pallets: 40 x 22 cm - 1 x sleeve pallet: 60 x 15 cm - 1 x sleeve pallet: 40 x 15 cm A complete pallet set for adult, youth and sleeve printing, with enough pallets to run all 6 stations in men's or women's sizes. 3. TIFLEX 40 x 40 CM INFRARED FLASH CURE UNIT (2008, VERY GOOD CONDITION) - Flash dryer for screen printing, 6 short-wave infrared emitters, 12 kW - Drying area: 40 x 40 cm - Drying timer and air-jet cooling timer - Automatic cycle start by contact rod when the pallet is detected - Half-power setting for delicate mesh - Height-adjustable stand on wheels - Three-phase 400 V, 18 A - Ideal for flashing a white underbase on dark garments before printing bright colours 4. TIFLEX T-IR 80 INFRARED CONVEYOR DRYER (2008, GOOD CONDITION) - Infrared textile dryer / drying tunnel for curing plastisol inks Djdpfx Abe Agvmmo Ascp - Useful belt width: 80 cm, length under heating element: 130 cm - Teflon glass conveyor belt resistant to 250 °C - Variable belt speed, temperature controller with digital display - Movable shutters for thick items up to 12 cm (caps) - Fume extraction outlet, diameter 125 mm - Power: 4.8 kW, three-phase 400 V, 7 A - Overall dimensions: 270 x 131 x 130 cm, net weight: 265 kg LOCATION AND SHIPPING Equipment located in Bègles (Bordeaux area), France. Shipping across Europe and worldwide available on quotation. Tiflex screen printing machine, manual screen printing press, screen printing carousel, 6 colour 6 station press, textile screen printing equipment, t-shirt printing machine, garment printing, flash dryer, flash cure unit, infrared conveyor dryer, plastisol curing, screen printing pallets, used screen printing equipment.

Condition: used, Lampertz Doku Data Safe PE12 Data Storage Cabinet Lampertz Doku Data Safe Data Storage Cabinet Valuable items compartment Doku diskette compartment Dcodpsl Sl Ihefx Ab Ajp Shelf with slots Hinge side on the right Fire protection class S 120 P according to EN 1047-1 2 hours of fire protection for documents and paper Resistance class 1 according to EN 1143-1 Year of manufacture: 2005 External dimensions Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777 mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg You can find more new and used items in our shop! International shipping costs available upon request!

Condition: refurbished (used), Year of construction: 1999, Fully refurbished Hosokawa Alpine Pharmapaktor APC L200/30 used standalone system by Alpine Originals. Technical details: Construction materials: Non product contacted parts: stainless steel Product contacted parts: stainless steel Non pressure shock resistant (NPSR) Non ATEX (can be implemented for an additional price) Without vacuum deaeration (can be implemented for an additional price) Scope of supply: Hosokawa Alpine Pharmapaktor APC L 200/30, including feeding, without Flake Crusher. The Hosokawa Alpine APC L200/30 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end product sizes and forms, from different sort of briquettes to granulates according to the required specification. Thanks to its flexibility, the machine can be adapted to different products and tasks. It even complies with the tough pharmaceutical standards. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the rollers. Dcodpfx Abevq Nlxj Aep Pre-compaction unit The pre-compaction unit is mounted on a supporting column and can be lifted and swivelled to the side. The charging hopper (with 2 brake bars) is equipped with a cylindrical/conical precompression screw. When the pre-compaction unit is lifted off, a limit switch switches off the compacting rollers and the screw. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Dcodsz Iphnopfx Ab Ajp Price: Upon request

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Dodpfx Ajz Ipfgob Aecp Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 121-380 PX / Electric Machine Year of manufacture: 2019 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 470x420 mm Platen size: 640x590 mm Ejector: electric Clamping unit: toggle Control: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection molding unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Dcedpez Ipltefx Ab Aop Parallel movements Automatic tool height adjustment Dimensions: Weight: 9400 kg Length/Width/Height: 5.10x1.60x1.88 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Dcodpfx Asz Ipr Tjb Asp Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-barless, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic operation Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the fixed platen Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic coolant regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Dcedpsz Ipu Usfx Ab Asp Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Djdpfx Abez Ipvfo Aecp Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 446,000 km, power: 355 kW (482.67 HP), first registration: 10/2021, fuel type: diesel, overall weight: 26,000 kg, color: green, gearing type: automatic, Equipment: soot filter, Vehicle number: 263240 1st owner, accident-free, fully serviced according to maintenance schedule, non-smoking vehicle ---- ASSISTANCE SYSTEMS * Lane Change Warning System * Lane Change Warning System INTERIOR * Armrest on the driver's seat OTHER EQUIPMENT * ZF Intarder * ZF Intarder Additional features ----- Color / Paintwork ----- Cab color: Opal Green * Color of headlight bezel and bumper: Opal Green * Underside and sides of cab * Cab structure and fenders, Opal Green * Air intake, door handles, black * Chassis color, gray ----- Tires / Wheels ----- Steel disc wheels, silver-gray * Wheel trims without center piece, silver-gray (RAL 9006) * F1, 315/70R22.5MI XMZ 156/150 L Steering CB72-1 * R1, 315/70R22.5MI XMD 154/150 L Traction DC75-2 * R2, 315/70R22.5MI XLEZ2 156/150 L Steering AB72-1 * Spare wheel, not applicable ----- Equipment / Optional Equipment ----- Cab - Super Space Cab * Cab with air suspension * Driver's seat: Luxury Air * Passenger seat: Comfort Air * Upper sleeper bunk * Antennas: AM/FM, 2x mobile phone, GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Front: 8.00 t, air suspension, 161 N * Rear: 11.50 + 7.50 t, air suspension, SR1344 * MX-13 engine, 355 kW/483 hp, cab emblem: 480 * Emission class Euro 6 * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * Rear axle ratio 2.38 * Wheelbase 4.80 m / rear overhang 1.72 m * EAS unit on the right side * Aluminum fuel tanks 620+340 l, height 620 mm * Fuel tanks on the left and right * AdBlue tank 45 l, left chassis side * Vertical battery box, left * Technically approved GVW, max. 27000 kg * Max. total weight with drawbar coupling 53000 kg * Daytime running lights with four LEDs on each side, integrated into the headlight units * Skylights * Fog lights and turning lights function * Translucent sun visor outside in green above the windshield * LED headlights with impact-resistant Lexan lens glass * Central locking with exterior light check function * Black steering wheel with easy-grip surface * Color of interior trim, Dark Sand * Cab, interior trim, Delta black * Cooler box (42 l) with luxury handle in aluminum look under the sleeper bunk * Storage space under the lower sleeper bunk * Lower sleeper bunk with Xtra Comfort spring core mattress * Sleeping area with upper sleeper bunk with step. * Curtains along the windshield and side windows. * Automatic climate control Dceds Ah Nwnepfx Ab Ajp * ECAS remote control * Digital (intelligent) tachograph VDO DTCO * Radio/USB player. Speaker system with 2 speakers. * Standard antennas: AM/FM radio frequencies, 2x mobile phone for mobile phones, GNSS for location purposes Extra: CB antenna. * Predictive Cruise Control * Axle load monitoring * Wheelbase 4.80 m / rear overhang 1.72 m. * LED work lights 2x * Vertical battery box on the left side. Without spare wheel holder * Wheel chocks 2x * Loose wiring harness with LED side marker lights * Preparation for body systems * Analog gearbox auxiliary drive control, no gearbox auxiliary drive * Generator 120 A, batteries 2 x 210 Ah AGM. * Battery energy monitoring * Standard tool set * Auxiliary heater Slim Cool 1400 Watt * Suitable for bodies with a stacking height of 1.32 m + 1.22 m * with attachment for a forklift * Steered trailing axle ---- Subject to prior sale and errors. The vehicle description serves only for the general identification of the vehicle and

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: A0441D0171, TRUMPF TruLaser Tube 7000 (T03) – 3.6 kW – LoadMaster Tube 6.5 m – Full Equipment Manufacturer: TRUMPF Dodo Afpucepfx Ab Ascp Model: TruLaser Tube 7000 (T03) Machine Type: CNC Tube Laser Cutting Machine Year of Construction: 2016 Control System: Siemens Sinumerik 840D Laser Power: 3,600 Watts (TruFlow 3600) Laser Technology: CO₂ Laser Voltage: 400 V Frequency: 50 Hz X-axis tube travel: 6,500 mm Outer diameter: 204 mm Lens cutting head with 155 mm focal length Condition: Used, very good Availability: Upon request For sale is a TRUMPF TruLaser Tube 7000 (T03), a high-performance CNC tube laser cutting machine with a 3.6 kW CO₂ laser and extensive optional equipment. The machine features an automatic LoadMaster Tube 6.5 m loading system with bundle support and two grippers, as well as a flexible unloading station with a length of 4.5 m. Thanks to the SeamLine Tube, PierceLine, FocusLine, NitroLine, and ControlLine equipment, the system offers versatile options for the precise processing of tubes and profiles. The integrated technology package for bevel cuts expands the processing capabilities. The scratch-resistant material feed, the movable conveyor tables, and the automatic scrap conveyor ensure an efficient material flow. All technical specifications are based on the available TRUMPF delivery documents from March 2016. Subject to change and errors. Sale due to business closure. Price upon request.

Condition: used, working width: 850 mm, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Seppi M. H3 085 flail mower / mulcher / incl. MS03 / in stock & immediately available / top condition! Price: €5,990.00 net / €7,128.10 gross - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment to a hydraulic arm - mulches grass and bushes up to 3 cm diameter - for excavators from 2 to 5 tons - for mounting on various attachment plates - floating attachment (parallelogram guidance) - indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the flow rate of the carrier device - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line required!!) - including hoses and check valve 2 hydraulic lines are required: supply and return. No leak oil! The device is delivered without hoses, connections. We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of various products from Seppi M., which are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale are reserved! Internal No.: 520042 Dcsdpfxez H Hvaj Ab Asp = Further information = Year of construction: 2023 Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Dcjdpfx Aez Et E Eeb Aop Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 11/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,861 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * 12V socket in the cab (in the instrument panel) * 12V socket, cup holder * 130 kW (LD) Dodpfxs Aib Eko Ab Ajcp * 2 remote control keys * 4 speakers: 2 tweeters, 2 woofers * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * 4-cylinder diesel engine, 2.0L, unit 03N.G * 8-speed automatic transmission, 4x4 * Turning brake function (Turn Assist) * Turning warning on both sides and drive-off alert * Exhaust system, EU6e (EC) * AGM battery (520 A, 92 Ah) and generator * Airbag for driver and front passenger, with front passenger airbag deactivation * All-wheel drive 4x4 * Exterior mirrors, left and right, convex, with LED indicator and wide-angle area * Exterior mirrors, electrically adjustable, heated, and foldable * Automatic Distance Control (ACC) * Battery 520 A (92 Ah) * Hill Start Assist * Operating voltage 12 V * Chrome package * Cruise Assist Plus * Roof console with storage compartments, two 1-DIN slots, and reading light * Rear axle differential lock (manually switchable, mechanical) * Digital radio reception (DAB+) * Digital instrument cluster * Three-point automatic seatbelts with height adjustment * One towing eye in the front * Parking assist (PDC) front and rear * Entry handle on the bulkhead in the cargo compartment * Entry handles on the rear pillars * Electrical connection block and wiring harness * Extended attention and fatigue detection system with driver observation camera * ESP with electronic differential lock, Anti-Slip Regulation (ASR) and ABS * Springs and shock absorbers, standard stabilizer * High beam assistant "Light Assist" * All-season tires * Speed limiter with predictive control * Rubber floor in the cab * H3 - High roof, painted in body color * Glove compartment with lockable lid, illuminated * Rear wing doors with 270-degree opening angle * Rear wing doors without window openings * Indium Gray Metallic * Inductive charging cradle * Premium interior noise damping measures * Box van * Keyless Go * Automatic climate control system "Climatronic" in the cab * Comfort Package Plus * Fuel system, diesel * Fuel tank 75 l * Intersection assistant (Front Cross Traffic Assist) * Radiator grille, black with chrome trim * L4 - Long * Country cluster "WLTP EU approval" * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo compartment * Leather multi-function steering wheel, heated with Tiptronic * Light & Visibility Package * Commercial vehicle version with up to 3 seats * MAN Connect services incl. call services * MAN Media Van Navigation Business Package (12.9 inch) * MAN SmartLink * With voice control * Multi-function front camera * Fog lights incl. cornering light * Emergency brake assistant (Front Assist) * Emergency assistant (Emergency Assist) incl. driving assistant (Travel Assist) and lane keeping assistant (Lane Assist) * Tires 235/65 R16C 115/113 R, rolling resistance optimized * Tire repair kit: 12-volt compressor and tire sealant * Tire pressure monitoring system (TPMS) * Rear view camera system with dynamic guide lines * Disc brakes front, 16" * Windshield wiper interval control with light and rain sensor * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Sliding door, right * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Crosswind assist * Service indicator 50,000 km or 2 years (variable) * Seat belt warning, front * Interior mirror with automatic anti-glare function * Seat covers in fabric

Condition: new, functionality: unexamined, Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens INDUSTRIAL PUMP GRUNDFOS CR15-5 5.5 kW – VERTICAL MULTISTAGE 400V SIEMENS IE4 The GRUNDFOS CR15-5 K-F-A-E-HQQE is a professional, vertical multistage centrifugal pump designed for industrial installations, pressure boosting systems, water supply systems, and technological systems. Equipped with an energy-efficient Siemens / Innomotics IE4 motor with a power of 5.5 kW, it provides high performance and efficient operation in demanding water installations. Original Grundfos pump – catalog number 93138502, manufactured in Denmark. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Manufacturer code: CR15-5 K-F-A-E-HQQE KEY ADVANTAGES Flow rate: 17 m³/h (17,000 l/h) – suitable for industrial and water installations. Maximum head: 74.6 m – for systems requiring high pressure. Power: 5.5 kW, power supply: 400V – three-phase Siemens IE4 motor. Maximum pressure: 16 bar – robust industrial design. Vertical multistage pump – compact design. Hydraulic components made of stainless steel – durability and corrosion resistance. Mechanical seal: HQQE – professional Grundfos solution. Protection class: IP55 – motor adapted for industrial operation. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Brand: Grundfos TECHNICAL DATA GRUNDFOS CR15-5 Manufacturer: Grundfos Model: CR15-5 K-F-A-E-HQQE Product number: 93138502 Type: centrifugal pump, vertical, multistage Motor power: 5.5 kW / 5500 W Flow rate (from nameplate): 17.0 m³/h Head H: 61.8 m Maximum head Hmax: 74.6 m Maximum pressure: 16 bar Maximum liquid temperature: 120°C Pump speed: 2919 rpm Frequency: 50 Hz Seal: HQQE Country of manufacture: Denmark Operating mode: S1 – continuous Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Type: other APPLICATION OF THE INDUSTRIAL PUMP The Grundfos CR15-5 pressure pump can be used in: booster sets and pressure boosting systems, water supply and industrial installations, water treatment and filtration systems, cooling installations and technological circuits, industrial washing systems, HVAC installations and circulation systems, production lines and process installations. Pump selection requires consideration of the hydraulic characteristics of the installation and the type of fluid. Dedo Aibhcepfx Ab Ajcp

Condition: used, Year of construction: 2001, functionality: fully functional, For sale: a 1 kVA, three-phase, dry-type, resin-insulated ALSTOM transformer, manufactured in 2001. The transformer is designed to step down voltage from V to 400 V and is intended for use in transformer substations and for powering industrial installations. Technical data according to the nameplate: Manufacturer: ALSTOM Serial number: 281483 Year of manufacture: 2001 Rated power: 1 kVA Primary voltage: V Primary voltage taps: / / / / V Secondary voltage: 400 V Dcede Aibbzspfx Ab Aep Primary side rated current: 28.9 A Secondary side rated current: 1443.4 A Frequency: 50 Hz Connection group: Dyn5 Windings: aluminum Cooling: AN – natural air cooling Insulation class: F Short-circuit voltage: 6% Maximum ambient temperature: 40°C Environmental class: E2 Climate class: C2 Fire resistance class: F1 Weight: 2515 kg Oil-free design, windings insulated with resin. The transformer is equipped with a steel frame and wheels for easy movement.

Condition: excellent (used), mileage: 16,933 km, power: 110 kW (149.56 HP), first registration: 10/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 35,000 mm, fuel: diesel, energy efficiency: A, CO₂ emissions: 202 g/km, fuel tank capacity: 70 l, color: black, gearing type: automatic, number of gears: 8, emission class: euro6e, number of seats: 3, total length: 54,500 mm, total width: 20,320 mm, Equipment: AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power mirror, seat heater, soot filter, spoiler, start-stop system, tire pressure monitoring, = Additional options and accessories = - Advanced Emergency Braking System - Alloy wheels - Automatic lighting - Body-colored bumpers - Esp and eds - Full LED headlights - Heat-resistant windshield - Heated exterior mirrors - Lane assist - Metallic paint - Mirror heating - Multimedia preparation - Parking sensors for - Partition wall with window - Rain sensor - Rear lighting - Rear parking sensors - Rear view camera - Remote central locking - Roof rail - Side skirts - Spare tire - Spoilers - Steering wheel audio controls - Telephone enabled with Bluetooth - Tinted glass = More information = General information Number of doors: 3 Year of construction: 2025 Technical information Number of cylinders: 4 Engine capacity: 1.996 cc Top speed: 175 km/h Weights Empty weight: 1.958 kg Carrying capacity: 1.067 kg GVW: 3.025 kg Max. towing weight: 2.800 kg Interior Interior: black Environment and consumption Average fuel consumption: 7,7 l/100km (37 MPG) CO2 emission (WLTP): 202 g/km History Service history: Present (serviced by dealer) Maintained according to instruction: yes Number of owners: 1 Condition Technical condition: very good Visual appearance: very good Damages: none Number of keys: 2 (2 hand transmitters) = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Dsdpfozx R Efox Ab Aocp Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, Electric winch Features: - Additional ramps - Electric winch - Electric tailgate Net price: €40,915.97 / Gross price: €48,690.00 Article number: R7B335602300.02 Technical data: • Brand: Brian James • Model: Race Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 600 x 235 x 199 cm • External dimensions (L x W x H): 770 x 255 x 264 cm • Loading height of the floor: 58 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,431 kg • Payload: 2,069 kg • Chassis: Low-loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass fiber reinforced plastic. Light in weight, yet extremely stable • Day-light roof extending along the entire length of the trailer • Handling grips at the front and rear • Front access doors on both sides facilitate the securing of the front wheels • Rear access doors on both sides facilitate the securing of the rear wheels • Large, two-leaf side doors on the left and right sides, lockable • Electric, full-height and full-width rear tailgate • 2x attachable additional ramps, aluminum, 1.5m, for very low vehicles • Rollers in the rear of the vehicle • Internal height 199cm - Access height at the rear 188cm • Side tower dimensions: XXX cm x XXX cm (W x H) • Lower edge of the side door, height inside: XX cm • Perforated floor offers high slip resistance and is extremely durable, even under the harshest conditions. • Numerous lashing points and a highly load-bearing floor offer flexible lashing options and perfect grip. • Wheel stops, fully adjustable with a quick adjustment system. Suitable for lowered vehicles • Closed floor panel made of composite (honeycomb core plastic floor) consists of a honeycomb structure, which is covered on both sides with a deck layer. Extremely light and robust. • 2x central floor storage boxes, recessed into the loading area, offer the ideal storage option for heavy, bulky objects. Aluminum lids are included. Dcedsydiibspfx Ab Aop • Electric winch, 12V with wireless remote control. 2,250 kg pulling force, with plastic rope and shackle hook. Operated by an onboard battery • Electro-hydraulic tilting function of the loading area, tiltable at the push of a button, for an optimal access angle • Central control unit for tilting function and tailgate, in addition to the wireless remote control. Includes battery charge indicator for the onboard battery • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO coupling and parking brake • Reverse drive automatic • Coupling head made of cast steel with integrated high-security lock ALKO • Plastic mudguards • 13-pin plug • LED interior lighting with LED strip • Rear lights • Large-sized, full-LED safety lighting • Side LED rear lights • LED work lights at the rear for better visibility during loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5-year chassis warranty • 4 wheel straps for securing over the wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about your requireme

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Tilting, Electric Winch Equipment: - Electric Winch - Additional Ramps - Electric Tailgate Net Price: €43,655.46 / Gross Price: €51,950.00 Article Number: R7B335602322.02 Technical Data: • Brand: Brian James • Model: Race Transporter • Vehicle Type: Car Transporter • Vehicle Condition: New • First Registration: No First Registration • TÜV/MOT: 2 years from first registration Djdpoz Ri Etsfx Ab Ascp • Internal Dimensions (LxWxH): 600 x 235 x 220 cm • External Dimensions (LxWxH): 770 x 255 x 278 cm • Loading Height of the Floor: 58 cm • Permissible Total Weight: 3,500 kg • Unladen Weight: 1,538 kg • Payload: 1,962 kg • Chassis: Low Loader (Wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support Wheel: Yes • 100km/h Approval: Optional, can be retrofitted DESCRIPTION • Black body made of high-quality, glass-fiber reinforced plastic. Light in weight, yet extremely stable • Day-light roof extending along the entire length of the trailer • Maneuvering handles at the front and rear • Front access doors on both sides facilitate securing the front wheels • Rear access doors on both sides facilitate securing the rear wheels • Large double-leaf side doors on the left and right, lockable • Electric tailgate in full height and width • 2x attachable additional ramps, aluminum, 1.5m for very low vehicles • Rollers in the rear of the vehicle • Internal height 220cm - Entry height at the rear 209cm • Side tower dimensions: XXX cm x XXX cm (WxH) • Lower edge of side door height, interior: XX cm • Perforated floor offers high slip resistance and is extremely durable, even under the most demanding conditions. • Numerous lashing points and a heavy-duty floor offer flexible lashing options as well as perfect grip. • Wheel chocks, fully adjustable with a quick-adjustment system. Suitable for lowered vehicles • Closed floor panel made of composite (honeycomb core plastic floor) consists of a honeycomb structure that is covered on both sides with a deck. Extremely light and robust. • 2x central floor storage box, recessed into the loading area, offers the ideal storage option for heavy, bulky objects. Aluminum lids are included. • Electric winch, 12V with remote control. 2,250 kg pulling force, with plastic rope and carabiner hook. Operated by an on-board battery • Electro-hydraulic tilting function of the loading area, tilt with the push of a button for optimum approach angle • Central control unit for tilting function and tailgate, in addition to the remote control. Including battery charge indicator for on-board battery • Very stable steel frame, welded • Frame completely hot-dip galvanized • Spare wheel with holder mounted • Very stable V-drawbar, REINFORCED • ALKO overrunning device and parking brake • Reverse automatic • Steel casting coupling head with integrated high-security lock ALKO • Plastic fenders • 13-pole connector • LED interior lighting with LED strip • Reversing light • Large-sized full-LED safety lighting • Side LED reversing lights • LED work lights at the rear for better visibility during loading and unloading • Integrated rear fog light • Various marker lights at the front, side and rear • Aluminum alloy wheels in anthracite • Heavy-duty support wheel • 5 years chassis warranty • 4 wheel tie-down straps for securing over the wheel _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible