Used R70 for sale (146)

Condition: used, Gear motor, electric motor -Speed: 53 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Dimensions: Nedpfxjci N Hfj Agxswi -Weight: 47 kg

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF50°-740-550 IR700 RA1948 Technical data: Conveying length middle radius (NL): 851 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 200 mm Inner radius (IR): 700 mm Conveying angle: 50° degrees support feet: optionally available Conveying speed (V m/s): 0,045-1,3m/s Drive: SEW gear motor Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports: Side guide one- and both sideds Nedpfx Aok Abmqjgxjwi Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Njdpfek Aba Tox Agxswi Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Nwedpek Aa T Hefx Agxei Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2015, overall weight: 87 kg, load capacity: 6 kg, arm reach: 706 mm, Kuka 5-axis robot KR6 fivve Maximum reach 706.7 mm Maximum payload 6 kg Position repeatability (ISO 9283) ± 0.03 mm Number of axes 5 Installation position Floor Installation area 320 mm x 320 mm Weight approx. 48 kg Axis data Range of movement A1 ±170 ° A2 -190 ° / 22,6 ° A3 5 ° / 156 ° A4 - A5 -117,6 ° / 90 ° A6 ±350 ° Operating conditions Ambient temperature during operation 5 °C to 45 °C (278 K to 318 K) Protection class Protection class IP54 Protection class central hand IP54 Controller: KR C4 compact Operating pendant: KUKA smartPAD Including Schunk gripper and connection cable Nedpfx Ajqy E Rpegxewi Profinet, Ethercat, X11 Incl. Murr MVP12 and IFM PQ7834 pressure sensor

Condition: excellent (used), fuel type: diesel, color: blue, lifting height: 64,000 mm, mast type: telescopic, Year of construction: 2008, operating hours: 6,034 h, General Information Year of manufacture: 2008 Technical Information Number of cylinders: 6 Drive: Wheel Unladen weight: 48,485 kg Functional Mast: Telescopic (5 sections) Mast length: 64 m Lifting capacity: 70,000 kg Superstructure brand: TADANO GR-700E-1-00211 ROUGH TERRAIN CRANE CE marking: yes Condition Njdpfx Agswudgqexowi Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Njdpfxjytn Hko Agxowi Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: used, mileage: 70,595 km, power: 155 kW (210.74 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Exceptionally well-maintained Mercedes-Benz 7.49-ton flatbed truck with a special flatbed for scaffolding construction, timber construction, and tradesmen, featuring a 6.10 m long flatbed, Bär Cargolift loading platform, wheelbase of only 4.22 m, 3-seater, 2 trailer couplings, air-suspended rear axle, total permissible weight 18 tons, cruise control, LED daytime running lights, from first owner, in excellent condition, and more. Cab: S ClassicSpace 3-seater Engine: OM934 R4 5.1 L, 211 hp, and 850 Nm Engine standard: Euro 6 D Drive: 4 x 2 Wheelbase: 4,220 mm Weight variant: 7.49 tons (3.4 / 4.6) Nwodpfx Agjzp Apkjxoi Flatbed interior dimensions: approx. length 6.10 m x width 2.42 m Flatbed with aluminum sideboards, sideboards split and 0.50 m high Front wall approx. 1.77 m high All stanchions foldable Superstructure frame hot-dip galvanized 15 Euro pallet spaces Tie-down points for load securing integrated into the outer frame Bär Cargolift loading platform at the rear, lifting capacity 1,000 kg according to the manufacturer Manual gearbox type G90-6/6.70-0.73 Differential lock in rear axle Front axle leaf-sprung, rear axle air-sprung Front axle 4.1 tons, rear axle bevel gear 325, hypoid 6.2 tons Front spring 3.4 tons parabolic Stabilizer rear axle Axle ratio i=3.909 Trailer coupling, ring spring with air pressure connections Trailer coupling, ball hitch, max. trailer load 3500 kg Permissible total weight 18,000 kg Trailer load 10,510 kg Electronic braking system with ABS and ASR Disc brakes on front and rear axles Active Brake Assist Stability control assistant Lane keeping assist Engine brake Cruise control Multi-function steering wheel Roof hatch External dustbin on the right LED daytime running lights Sun visor on the driver and passenger side Comfort driver's suspension seat with velour seat cover German vehicle, first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will be happy to provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2614

Condition: used, mileage: 70,595 km, power: 155 kW (210.74 HP), first registration: 02/2020, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Exceptionally well-maintained Mercedes-Benz 7.49-ton flatbed truck with a special flatbed for scaffolding, timber construction, and tradesmen, featuring a 6.10 m long flatbed, Bär Cargolift loading platform, wheelbase of only 4.22 m, 3-seater, 2 trailer couplings, air-suspended rear axle, total permissible weight of 18 tons, cruise control, LED daytime running lights, from first owner, in excellent condition, and more. Cab: S ClassicSpace 3-seater Engine: OM934 R4 5.1 L, 211 hp, and 850 Nm Engine standard: Euro 6 D Drive: 4 x 2 Wheelbase: 4,220 mm Weight variant: 7.49 tons (3.4 / 4.6) Flatbed interior dimensions: approx. length 6.10 m x width 2.42 m Flatbed with aluminum sideboards, sideboards split and 0.50 m high Front wall approx. 1.77 m high All posts foldable Subframe hot-dip galvanized Nsdpfx Ajzp Apdsgxswi 15 Euro pallet spaces Lashing eyes for load securing recessed in the outer frame Bär Cargolift loading platform at the rear, lifting capacity 1,000 kg according to the manufacturer Manual transmission, type G90-6/6.70-0.73 Differential lock in rear axle Front axle leaf-sprung, rear axle air-suspended Front axle 4.1 tons, rear axle crown wheel 325, hypoid 6.2 tons Front spring 3.4 tons parabolic Stabilizer bar on rear axle Axle ratio i=3.909 Trailer coupling, ring spring with air pressure connections Trailer coupling, ball head, max. trailer load 3500 kg Permissible total weight 18,000 kg Trailer load 10,510 kg Electronic braking system with ABS and ASR Disc brakes on front and rear axles Active Brake Assist Stability control assistant Lane keeping assist Engine brake Cruise control Multi-function steering wheel Roof hatch Exterior dust box on the right LED daytime running lights Side sun blinds on driver and passenger sides Comfort driver's suspension seat with velour upholstery German vehicle from first owner Very good and well-maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing options. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2614

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth Nedpfx Agev Dz Ixexjwi End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: used, Year of construction: 2015, machine/vehicle number: 00, ACM Vertical Sawing Machine, Model Star 700 Njdpfxslp Irrj Agxewi Year of manufacture: 2015

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Nwedpfx Ajw I Ug Hsgxei Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Njdpfoxg Ux Ejx Agxewi Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: Nwedpfx Aszc Sk Eegxei Working area X: 3,400 mm Working area Y: 1,287 mm Working area Z: 180 mm Number of milling spindles: 1 Main motor: 15 kW Speed, max.: 24,000 rpm 4th axis Tool clamping system: HSK-F63 Tool changing stations: 18 Vertical drilling spindles: 18 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 2 Nut saw in X-direction Design: Cantilever machine Machine table: Console table Number of consoles: 6 Positioning aid: Dot laser Number of vacuum pumps: 1 Capacity of vacuum pumps: 140 m³/h Safety device: Foot mat Control system: BECKHOFF CONTROL Software: HOLZ-HER CAMPUS V6.4 Conformity marking: CE marking Weight: approx. 3,840 kg Space requirement, length: 6.7 m Space requirement, width: 4 m Availability: Short-term, by arrangement Location: Flörsheim

Condition: used, Year of construction: 2024, Cutting length: 3700 mm Drive: 2 x 3.0 kW motor 2 saw blades, diameter 600 mm / Z = 138 New saw feed: hydropneumatically prepared for installation of an electronic control system Aggregate on the left is fixed, on the right is movable R700i database for max. 400 basic profiles, 1000 color profiles USB and network connection / remote maintenance Cutting angle: 20° - 90° - 135° Integrated memory TFT color touchscreen Aggregate adjustment: stepless motorized aggregate adjustment 20° - 135° including section clamp (1x per aggregate) Indication of swivel range: swivels outwards Clamping device: vertical clamping device with mounting plate for holding profile-related parts Nwjdpfx Agozhpbdsxsi Feed from the right: movable roller conveyor, support length 2900 mm, width 250 mm Stops: socket Extraction Software stop for overlengths Stop for short parts, pneumatically extendable Label printer: RAPID-specific label printer RED-300, installed in the control panel R700 sealing clamping device Control cabinet, freestanding R700 waste conveyor Cutting length 3.7 m Inclined conveyor 1000 mm horizontal x 2500 mm vertical Storage location: customer

Condition: ready for operation (used), Year of construction: 1989, A Still diesel forklift is available. Payload: 3500kg, max. gross weight: 10000kg, load center: 500mm, load distance: 510mm, engine: Mercedes-Benz OM617, displacement: 3m³, engine power: 46.5kW, wheelbase: 1950mm, mast: duplex, lift height: 3320mm, machine dimensions X/Y/Z: approx. 3950mm/1350mm/2400mm, weight: approx. 5450kg. An on-site inspection is possible. Nsdpfx Aezk Nalsgxewi

Condition: used, Year of construction: 2009, operating hours: 69,500 h, machine/vehicle number: PR26, Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400–1000 mmTie-bar spacing (H × W): 900 × 1000 mmPlaten size (H × W): 1340 × 1410 mmOverall dimensions (L × W × H): 1000 × 2340 × 2400 mmWeight: 30000 kgOption: Electric dosing motorControl system: DIMIELAdvanced Automation & Control SystemsThe machine is equipped with a DIMIEL control system featuring a clear HMI for fast setup, monitoring, and optimization. Core-pull functions (2 + 2) and multiple air circuits are programmable to support complex molds and automated sequences. The integrated robot interface enables seamless connection to handling robots for part take-out, insert loading, or downstream packing, enhancing OEE and reducing cycle time variability. Safety interlocks, guarded access zones, and centralized control help operators maintain stable, repeatable processing with quick parameter adjustments and recipe management.Production Line Integration CapabilitiesThanks to its robot interface and flexible I/O, this injection molding machine integrates smoothly into plastics manufacturing cells feeding beverage production and industrial packaging workflows. It supports inline or standalone operation and pairs well with resin dryers, loaders, mold temperature controllers, and quality inspection systems. For PET preform applications, it can be positioned upstream of stretch blow molding machines that supply PET bottles to used bottling line and second hand packaging machinery.Machine Condition & Maintenance HistoryThis unit is a second hand machine with 69500 operating hours. It is presented in working condition and ready for operation, suitable for facilities seeking reliable capacity expansion without the lead time of new equipment. The robust Negri Bossi Vector platform and the electric dosing motor option contribute to stable performance and efficient plasticizing o... Nodpeziyzdefx Agxjwi

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: R0-TR700-2 PLC control Control panel for setting the operating modes, strapping distances, strap tension Automatic PP straps width 5, 6, 7, 8, 9 or 12 mm Operating voltage: 400 V 3AC Power consumption: 3 A Power: 2.1 kW Frequency: 50 Hz Castors: four swivel castors, two of which are lockable Overall dimensions: approx. 1350 x 1200 x 1650 mm (WxDxH) Nedpfxotzbhco Agxswi Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 * Year of manufacture: 1993 Nwjdpfozdwtyex Agxsi * VW 1.6 engine * Cylinder head gasket defective

Year of construction: 2002, condition: excellent (used), Max. sheet size: 720 x 320 mm Min. sheet size: 140 x 210 mm 9 creases per sheet Nwjdpfolhr Iyjx Agxoi Variable speed from 1200 – 1800 sph Suitable for paper stocks between 120 to 300 gsm

Condition: new, Year of construction: 2026, Accurate and efficient industrial bending machine for bending steel, copper, aluminum and brass pipes. The ability to select the optimal bending radius allows for high-quality results without deforming the material. The presented bending machine is very easy to use. Pipe benders are devices used in individual and small-series production of parts in the automotive, furniture, architecture or garden tool industries. The main bending die is driven by a reduction gear, an electric motor. The device can work in two modes: manual and semi-automatic. The simple and durable design ensures long-term, trouble-free use and guarantees ease of use. Nwsdjvugv Ajpfx Agxoi Standard equipment digital reading of the bending angle The BENDMASTER machine is equipped with dies for pipes with a diameter of: 38.1; 48.3; 70 mm Technical data MAXIMUM DIAMETER OF BENT PIPE 70x5 mm MAXIMUM DIMENSION OF BENT SQUARE PROFILE 50x50x2 mm MAXIMUM BENDING ANGLE 270° DIE ROTATIONAL SPEED DURING BENDING 1.2 rpm DIE ROTATIONAL SPEED DURING RETURN 2.4 rpm MAIN MOTOR POWER 5 kW EXTERNAL DIMENSIONS OF THE DEVICE 1300x700x900 mm WEIGHT 680 kg For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 Nwedovnri Iepfx Agxoi - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: good (used), Year of construction: 2005, 3 pieces Carton strapping machine, Mosca, RO-TR 700-4, fully automatic - second-hand - : Price per piece ex location: only 3.950.-€ (net)!!! Njdpeq Tr Slsfx Agxjwi Manufacturer: Mosca Type: RO-TR 700-4 Year of construction: 2005 The machines currently work with 9mm belts Channel width: approx. 72cm Channel height: approx. 54cm No.: 80527 etc. 3L-N-PE 400V, / 3 AC 1.5 kW / 50 Hz 2,5 A Control voltage: 24V, DC Condition: good Available: immediately Location: Hanau area

Condition: like new (used), Year of construction: 2021, For sale is a virtually new multi-blade bandsaw (HR700) from Woodmizer. The system has 6 cutting heads. Currently, 4 are assembled together and two are separate. It is no problem to assemble the machine completely, as the system is modular. The machine has 40 operating hours. The machine is being sold because we do not need the system for the cutting tasks we perform. If you have any questions, please do not hesitate to contact me. Nwedpfx Aezdaawegxsi

Condition: used, functionality: fully functional, Year of construction: 2025, Schwamborn Concrete Processing Machine STR 702 S -1200 STR 702 S -1200 — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced Njdpfx Agjy A E I Esxowi - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,950 plus VAT | EXW Einbeck | Delivery upon request