PUFF PASTRY JOINTING MACHINE

RAUTE C2000 - 2615 - 1R70003

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller Hedpjtgqlyofx Aagefg

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws Hedpfx Asvbtpeagefg -cutting cross section 180x220 mm, 150x300 mm

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Hsdouwktnepfx Aagefg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. Hfodpfst Uucajx Aagjg To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. Hedetpxy Tepfx Aagefg The machine is brand new and has not been commissioned.

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Hfedpfx Aoyr Aiqsagjg

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 Hfedpevhctwefx Aagog - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Hfodpfxotu U Ebe Aagsg

Condition: used, Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, Digital screen printing machine with hot foiling unit. Year of installation: 2019. Minimum print format: 29x42 cm, maximum: 75x120 cm. In excellent condition. Hedpfx Aasxrz T Tsgjfg

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding With multiple crosscut saw With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V Hfjdsg D Ugkepfx Aageg 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the