Shrink packer, shrink packer, chamber machine, packaging machine, shrink tunnel
-Welding area: 550 x 550 mm
-Welding bracket: closes and opens motorized
-Automatic: conveyor belt
-Transport belt width: 650 mm
-Transport belt length: 3200 mm
-Shrink tunnel height: 240 mm
-Control: the welding temperature
-Regulation: the temperature
-Connected load: 14 kW
-Dimensions: 3200/1150 / H1500 mm
-Weight: 590 kg
table rotating: nein °
table: 360 mm
temperature: - °C
electrics - voltage/frequency: 380/50 V/Hz
height over floor: 900 mm
total power requirement: 0,25 kW
space requirements of the machine approx.: T:01,1xB:0,73xH:1,4 m
Vacuum-Shrink Wrapping Machine
- support on the table 220x500mm
- shape size max. 350x250mm
- stroke up/down 380mm
- vacuum pump manufacturer: Gebrüder Becher; type VT 6 , YOM 1973; flow rate 6m³
- operation via foot pedal
Can be purchased together with vaccum shrink-...
A vacuum packaging machine with a fabulous 103 m³ / h vacuum pump. With this vacuum packing machine you have an excellent packaging solution.
Chamber size: 70 cm x 59 cm x 18 cm
Sealing bar: 70 cm
Voltage: 380 volts
Power: 5.5 kW
Weight: 415 kg
Dimensions (L X W X H): 171 x 81 x 113 cm
KOCH ULTRAVAC UV2100 Double Chamber Vacuum Packing Machine. The object is in a novel state and fully functional.
- Die Cast Aluminum Body
-Digital Control System
- High performance vacuum pump: Busch RA0250
- Chamber: 780mm W x 670mm x 200mm
- Parameter Lockout and Pre-program Package
- Wide Band Seal Bar
- Anti-wrinkle Hold Down Bars
- Air Compressor Seal Assist System
- LBH Knife System
Power: 400v 50 Hz 25amp
- vacuum pump: Busch RA0250
Type: Oil Lubricated Rotary Vane
Displayment: 180 CFM
Vacuum unit VC999 07P BJ:2007. 400V connection.
Dimensions chamber approx. 88x50x15cm, with 2x CLFH 220 Rietschle vacuum pumps. Bj:1998 Power 2x 5.5 kW.
Very good condition, works perfectly.
1 automatic blister sealing machine make ILLIG, type HSA 50 RD with vacuum forming
max. working area = max. carton size 500 x 300 mm
Forming surface min. 100 x 50 mm
max. blister depth pos./neg. 68/80 mm
min. cutting width single blister 45 mm
min. card width 50 mm
Total connected load approx. 15 kW
Air consumption per cycle 68 Nl/cycle
max. sealing seam area 225 cm²
year of manufacture 1989
- Film unwinding device motorized
- Contact heating top/bottom
- Forming station with vacuum
Used Automatic shrink tunnel Cryovac CJ62 that shrinks the packaging material with hot air.
Capacity: up to 28 packages per minute
Adapted for continuous operation.
Maximum product dimension:
Length: no limit
Width: 280 mm
Height: 150 mm
Weight: 15 kg
Operating speed: from 7m/min to 28m/min
Height: 1600 mm
Width: 950 mm
Length: 1510 mm
Weight: 300 kg
Electric power supply: 400V 50Hz 3N
Total power: 13 kW
KOMET PLUSVAC 25
Komet mod PlusVac 25 with double chambers and 4x welding bridges. Year of courage 2009 very little used since new.
Dimensions chamber 64 x 49 cm
Welding bridges 49 cm
Dimensions machine 140 x 60 cm H 100 cm.
High quality vacuum chamber
The VMS 53 is an ergonomic vacuum chamber with a powerful 8 m3/h Busch pump which gives it a fast machine cycle. Standard the VMS 53 is equipped with a flat lid but it also available with a high lid to increase your capacity and flexibility. Easy to use: plug and play. This all against a very competitive price.
- Standard time control
- Busch vacuum pump
- Maintenance friendly and easy to clean construction
- Made from high quality materials
- Standard double seal
AMTEC SKINpack Flat Skin Sealer 2 M
Manual Skinpack machine ideal for skinning small quantities. Operations per production cycle: manual positioning of the skin film in the stenter frame (frame then moves up to the top of the heater), positioning of the skin sheet and the product(s), starting of the automatic skin process which includes wrapping of the products with the heated skin film and skin-tightening by a vacuum pump. Die cutting of the skinpacks can be done by an external machine such as...
AMTEC SKINpack Flat Skin Sealer 6 A
Automatic Skinpack machine with vacuum function for skinning your products in flat skin packaging. Operations per production cycle: positioning of the skin sheet and the product(s), starting of the automatic skin process which includes wrapping of the products with the heated skin film and skin-tightening by a vacuum pump, finally removing of the skin sheet and separate it from the pulled film. Die cutting of the skinpacks can be done by an external machine s...
AMTEC SKINpack Die Cutter L80 W60
Die Cutter for skin packages. Fast and quiet cutting process by bi-flex cutting principle (cutting force concentrated between 2 pressure rollers). - Specifications: area of the die cutting format: L800xW600; recommended max. product height: 150mm; max. speed of the machine in neutral: 8 cycles/minute; power: 380 V, 3 phase; machine dimensions: L2250xW980xH1350mm. In case of not fully automatic machines, the number of cycles is to be understood as an oper...
AMTEC SKINpack Flat Skin Sealing System 4 SA
Skinpack packaging system with vacuum function for skinning your products in flat skin packaging. The system consists of the skin sealing machine and a die cutter for die-cutting the skin packages. Operations per production cycle: positioning of the skin sheet and the product(s), positioning the heater above the film stenter frame, starting of the automatic skin process which includes wrapping of the products with the heated skin film and skin-tighte...
AMTEC SKINpack Flat Skin Sealing System 6 A
Skinpack packaging system with vacuum function for skinning your products in flat skin packaging. The system consists an automatic skin sealing machine and a die cutter for die-cutting the skin packages. Operations per production cycle: positioning of the skin sheet and the product(s), starting of the automatic skin process which includes wrapping of the products with the heated skin film and skin-tightening by a vacuum pump, finally removin...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.