Used R70 for sale (134)

Condition: used, Gear motor, electric motor -Speed: 53 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Dimensions: -Weight: 47 kg Codpfsci N Hfox Aqvsri

Condition: new, pressure: 70stroke: 500table area: 700x500daylight: 600rapid traverse: 25working speed: 5motor: 4messurements (LxWxH): 1400 x 900 x 2250weight approx.: 1900Features:Two-stage hydraulic pump – integrated into the machine frame Credpfx Aqewwx Axsvsi Lever and push-button control – with simultaneous two-hand operation for safety Cylinder stroke: 500 mm – suitable for a wide range of applications Milled lower worktable – solid and precision-machined Two working speeds – for fast yet accurate operation Adjustable maximum pressure – adaptable to different tasks Integrated pressure gauge – for precise pressure monitoring during operation

Condition: good (used), Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 250 mm -Weight: 15 kg Cedpfxeb A Ihte Aqvori

Condition: good (used), Bezel, setting stick, lynette Csdpfx Asb A Rfpjqvsri -Max. passage: Ø 70 mm -Peak height: 200 mm -Drawing with the photos -Weight: 8 kg

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger Csdpodfglljfx Aqvjri -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg

Condition: good (used), Bezel, setting stick, lynette -Max. passage: Ø 70 mm Crsdpfx Aqsb A Iuisvoi -Peak height: 250 mm -Weight: 10 kg

Condition: good (used), Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Brass -Hole spacing: 295 mm Csdpfjb A Rqqjx Aqvsri -Peak height: 135 mm -Weight: 4 kg

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: KUKA, This KUKA KR 6 R700 sixx robot arm was manufactured in 2018. It features a maximum load capacity of 6 kg and a reach of 706 mm, complemented by a KPC4 smallsize robot controller. Consider the opportunity to buy this KUKA KR 6 R700 sixx robot arm. Contact us for more information. • Max. load: 6 kg • Range: 706 mm • Controller: KPC4 smallsize-2 (smallsize robot controller) Credex D Hiqspfx Aqvoi • Very good condition, only about 4000 working hours!

Condition: new, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, White aluminum Dimensions and Weights Height of the fifth wheel coupling: 1120 mm Inner side height below the longitudinal beam (from the outside) for the selected inner height: For h = 2725 mm, loading space: 2637 mm Neck height: 120 mm Overall length: 13882 mm Length of the inner platform: 13633 mm Outer width: 2550 mm Width of the inner platform: 2480 mm Inner width between the posts: 2480 mm Inner width between the longitudinal beams (lower longitudinal beam): 2430 mm Wheelbase: 1310 mm Distance: Kingpin to 1st axle: 6390 mm Total weight: 36000 kg Technical total weight: 42000 kg Permissible administrative axle load: 8000 kg Permissible technical axle load: 9000 kg Permissible fifth wheel coupling load (technical): 15000 kg Unladen weight: 5383 kg TECHNICAL DATA Chassis Wielton lamp carrier Wielton side impact protection – white solid filling Credpfozyduvjx Aqvei Fixed rear underrun protection Steel rear underrun protection Steel impact buffer at the rear Perforated outer frame with continuous lashing points for securing the load Floor made of 30 mm screen printing plate, load capacity 7 tons Axles and Suspension Number of axles: 3 Fixed axles 1st lift axle Fifth wheel height: 1120 Axles: 3x9000 kg, 22.5 disc brake, ET=120, aggregate and clamps manufacturer: BPW Support legs SAF Hercules 2-speed geared landing legs, full load Fenders PVC fenders – shell, 2 front, 2 rear Rims 6x Steel rim 22.5-11.75 ET-120 Protective caps for wheel nuts Tires 6x Tires 385/65/22.5 – according to manufacturer's choice Other chassis equipment Ship fastening straps, 4 pairs Toolbox - 145L Two wedges with fasteners Customs rope/tarpaulin rope on the front wall (no customs seal) 1 retractable ladder at the rear 2 identification plates at the rear on the rear wall 565x200 ECE-R70 Superstructure Internal height: 2725mm Superstructure Sliding roof Front wall impact protection (metal plate) H=1500mm Tarpaulin tensioning device at the rear Standard tarpaulin tensioner Painted aluminum wall, Magnelis steel posts Sliding tarp, one-sided, from rear to front, EDSCHA HYBRID Rear wall as an aluminum double-wing door, steel posts Side tarpaulins with 24 tarpaulin tensioners, Pallet stop with lashing eyelets DC9.5 Braking system/Pneumatics Steel air tank Braking system Knorr The Knorr system is not compatible with Ford tractors Chassis painting Chassis painting RAL 7021 (black-grey) KTL coating Tarpaulin color Side tarpaulin color Polplan 018 ~ RAL 9006 (silver) Electrical system LED rear lights – 2 pcs 1X15-pole with EBS connection according to ADR Lighting LED Aspöck - EUROPOINT III with flashing side marker lights Additional systems A telematics system with access to a telematics portal for trailers and semi-trailers, which has a tire pressure monitoring system. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheels and a telematics device with a battery connected to the EBS. The telematics device supports 2G mobile networks and LTE Cat. M1. Includes a 12-month subscription for using the ATP telematics portal. Marking Partial contour marking on the side, yellow Partial contour marking at the rear, yellow Wielton warning sticker Designation in Polish Sticker set for ferry tarpaulins Certificates/Homologation Load securing certificate according to VDI 2700 DIN EN 12642 XL DC 9.5 certificate Beverage certificate Warranty The manufacturer provides a 24-month warranty on the vehicle, subject to the