Used Poultry Slaughter for sale (144)

Condition: used, Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: AMW200SM56T4002J, Microwave thawing unit for fast and waste-free thawing of frozen meat, poultry, and fish blocks, etc. Equipped with a chamber for cyclic operation (loading – thawing – unloading). Ideal for thawing frozen blocks within minutes (temperature change from -20 °C to -4/-2 °C). The blocks remain sufficiently cooled for further processing (cutting/mincing). Thawing time from -20 °C to -2 °C may vary depending on the thickness of the blocks. Power: 10 kW Voltage: 3 x 400 V, 50/60 Hz Single batch load: up to 55 kg (e.g., 2 blocks of 600 x 400 x 200 mm each) Bwodpfex D Aqdex Afmow Thawing time: 4–15 minutes (depending on desired state after thawing) Microwave frequency: 915 MHz Water pressure: 4 bar Water consumption: 12 l/min at a temperature of 18–22 °C Air consumption: 20 liters/minute Air pressure: 6 bar All further information is available on request.

Condition: reconditioned (used), We offer a CARNITECH screw conveyor with feeding hopper – an industrial set designed for conveying, feeding and dosing raw material in food processing plants. The system is suitable for production lines where stable, controlled and efficient product feeding to further processing machines is required. The set consists of a feeding hopper and a screw conveyor, often referred to as an inclined screw feeder. This solution allows the product to be conveniently loaded into the hopper and then smoothly transported to the next stage of the process, for example to a mixer, grinder, bowl cutter, separator, forming machine, packaging machine or other production equipment. The CARNITECH screw conveyor and hopper are equipped with motors of 4 kW and 2.2 kW, ensuring efficient operation even in demanding production conditions. The control system is equipped with frequency inverters from renowned brands Fuji and Danfoss, allowing smooth speed adjustment and adaptation of the machine operation to the type of raw material and the capacity of the entire line. A major advantage of the system is the possibility of smooth speed regulation and reverse operation, meaning the direction of rotation can be changed. This gives the operator better control over the feeding process, helps reduce the risk of blockages and allows the machine to be adjusted to current production needs. The safety system is designed using components from the well-known and respected company Pilz, which increases operator safety during daily operation. The system can be used as a standalone conveying unit or as part of a larger technological line in meat, poultry, fish processing plants and convenience food production. Technical data: Manufacturer: CARNITECH Type: screw conveyor with feeding hopper Set components: screw conveyor / inclined screw feeder + feeding hopper Motor power: 4 kW and 2.2 kW Control: system with frequency inverters Frequency inverters: Fuji and Danfoss Speed regulation: smooth Reverse operation: yes Safety system: Pilz components Application: conveying, feeding and dosing of raw material Main advantages: stable feeding of raw material to the production line set consisting of a feeding hopper and screw conveyor 4 kW and 2.2 kW motors smooth speed adjustment possibility of reverse operation frequency inverters from Fuji and Danfoss safety system based on Pilz components Bsdezi U H Uopfx Afmsww efficient operation in demanding production conditions possibility of integration with other food processing machines solid industrial construction solution for automation of raw material transport

Condition: used, The Fomaco FGM 64 SC Injection Machine is manufactured by the Danish company Fomaco. The FGM 64 SC model features a robust, industry-proven multi-head injection machine design, engineered for the precise and uniform injection of brine or marinade into meat products. Technical specifications: Manufacturer: Fomaco Model: FGM 64 S Year of manufacture: 2003 Number of needles: 128 needles (32 needles in 4 rows) Needle thickness: 3 mm Power supply: 3 x 400 V / 50 Hz Rated / maximum current: 23 A / max 35 A Bwsdpfx Aezlrfasfmew Operating pressure: 6 bar Dimensions: 1700 x 1700 x height 2500 mm How does the Fomaco FGM 64 SC injector work? Fomaco injection machines operate using a system of electronically controlled valves that deliver brine directly to the product via a precise needle array—the company refers to this approach as the “pump-to-product” system, which maintains constant fluid pressure and eliminates unevenness in brine distribution. As a result, the injection is uniform regardless of the size and shape of individual pieces of raw material, which translates to higher, repeatable yield and the absence of under- or over-cured areas in a production batch. The FGM 64 SC injection head is equipped with 32 needles arranged in 4 rows—a total of 128 needles, each 3 mm thick—which, at low operating pressure, allows for gentle yet precise brine injection without excessively disrupting the meat’s tissue structure. The head’s design also allows for quick removal of the needle cassette, which significantly reduces cleaning time and ensures production hygiene. Key advantages of the Fomaco FGM 64 SC injector Injectors from this brand are valued above all for process repeatability and operational stability even under demanding production conditions—Fomaco designs its machines to perform “under extreme production conditions,” which directly translates to reliability in the day-to-day operations of a processing plant. The precise injection system ensures uniform distribution of salt and other brine ingredients throughout the entire batch of raw material, which is particularly important in the production of cured meats, hams, pork shanks, and marinated poultry products, where the uniformity of curing directly affects the quality, flavor, and shelf life of the finished product. As a result, producers can count on a higher and more predictable final yield. Applications of the Fomaco FGM 64 SC Injection Machine The Fomaco FGM 64 SC injection machine is used in the processing of red meat, poultry, and fish—anywhere where the uniform and controlled introduction of brine or marinade into the raw material is of critical importance. The machine is well-suited for both the production of classic cured meats and hams, as well as for lines focused on marinating poultry portions or fish fillets, where gentle handling of the raw material and a high, consistent yield are essential.

Condition: ready for operation (used), Year of construction: 1999, Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible. Bedpfx Afew S Tyyomeww

Condition: good (used), Year of construction: 2016, total length: 2,500 mm, total width: 1,300 mm, total height: 1,600 mm, overall weight: 927 kg, input voltage: 400 V, power: 2.7 kW (3.67 HP), tank capacity: 1,000 l, Nowicki MA-1000 PSCH Tumbler with cooling The Nowicki vacuum tumbler with a capacity of 1.000 liters with the cooling option (with the cooling unit included) designed for plasticizing muscles, meat parts, small meats as well as poultry carcasses and parts in a vacuum. It ensures high quality of manufactured sausage products Design advantages:  acid-resistant design  precisely selected shape of the drum and tumbler blades system  microprocessor controller  smooth regulation of all massage parameters  maintenance-free vacuum regulation system  multi-stage protection system for the vacuum pump  technological hole  brine intake valve  pulsating vacuum  possibility of massaging in a replaceable (gas) environment  computer system for monitoring device operating parameters Manufacturer: Nowicki Model: MA-1000 PSCH Year: 2016 Capacity: 1.000 liter (500 kg.) Power: 400V / 50Hz / 2,7kW Bedpfxjzlpa Is Afmoww Machine dimensions LxWxH: 2.500x1.300x1.600 mm Machine weight: 927 kg.

Condition: good (used), Year of construction: 2014, Maja ESB 4434/1 GV Skinning machine The Poultry Skinning Machine MAJA ESB 4434/1 GV is suitable for the safe automatic skinning of fresh poultry parts by infeed conveyor belt. It offers the following advantages: For perfect skinning of poultry parts with excellent yield. Versatile use, for removing the skin of different parts of chicken and turkey, coming either from dry or wet chilling. Gentle skinning process, without damages to the sensitive poultry meat and the skin for increased product quality. Maximum operator safety by automatic skinning through infeed conveyor belt MAJA Skinning Machine in accordance with current CE regulations.  Manufacturer: Maja Model ESB Year: 2014 Bedpfx Afjy Ed Txemsww Cutting width: 385 mm Power: 50Hz / 400V / 0,88kW Machine dimensions LxWxH: 1.800x750x1.250 mm Machine weight: 250 kg.

Condition: excellent (used), WOLFKING Industrial Meat Grinder – Stainless Steel WOLFKING industrial meat grinder, designed for the continuous grinding and size reduction of meat and meat products in high-capacity industrial lines. The equipment incorporates a large feed hopper that allows for bulk product input and controlled conveyance to the grinding system. Its robust construction and powerful drive are designed for continuous operation in professional meat processing facilities. The industrial configuration of this type of grinder allows for preparing the raw material with an adequate particle size before subsequent operations of mixing, emulsification, forming, cooking, or packaging. MAIN FEATURES -Manufacturer: WOLFKING -Type: Industrial meat grinder -Application: Meat and meat products -Continuous grinding -Large feed hopper -Automatic product feed to the grinding system -Feed screw system -Industrial cutting assembly -High-power electric motor drive -Controllable speed/operation -Primarily stainless steel construction -Robust structure for intensive use -Integrated control panel -Protections on moving parts -Designed for continuous industrial production -Integrable into complete meat processing lines PROCESS The meat is fed into the feed hopper, from where it is conveyed to the grinding mechanism. The feed system forces the product in a controlled manner towards the cutting assembly, where size reduction takes place before discharge to the next stage of the process. The final size of the product will depend on the installed plate, blades, and cutting configuration. It can be integrated with: Bwsdpfx Aezxwwhjfmjw Bin/cart lifters Feed conveyors Mixers Industrial cutters Emulsifiers Vacuum mixers Formers Stuffers Dosing systems Meat product preparation lines APPLICATIONS Especially suitable for slaughterhouses, cutting rooms, meat product manufacturers, meat processors, and prepared food plants that require a high-capacity solution for size reduction. Depending on the installed cutting system and the characteristics of the raw material, it can be used for beef, pork, poultry, and various meat preparations. The combination of WOLFKING technology, large hopper feed, and industrial construction provides a robust solution for continuous grinding and meat preparation processes. Machine available for inspection. Additional technical information, dimensions, cutting configuration, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2012, machine/vehicle number: A092895, Marel OptiWeigher + 20-Gate Fish Grader with 6 Printers Grader type: dis-ma45-b600-dual Complete used Marel weighing, grading and packing system for fish processing. The system includes a Marel OptiWeigher dynamic weighing module and a dual-sided Marel grader with 20 grading outlets. Configuration: - Marel OptiWeigher - 20 grading gates - 10 gates on the left - 10 gates on the right - gate spacing: 675 mm - 6 label printers - 3 printers on each side - packing shelves - roller conveyors - packing buffers - stainless-steel food-processing construction - Intralox Series 1650 polypropylene belt Bwjdpfx Aez Hc Aiefmjw - approx. grader length: 9,050 mm - electrical supply: 3 × 400 V + N - grader motor: 0.75 kW The product is dynamically weighed by the OptiWeigher and can then be automatically distributed to the selected grading outlet according to the programmed weight class. The machine was used for fish processing and is suitable for applications such as: - fish grading, - salmon processing, - batching, - weight classification, - direct packing at grading stations. It may also be adapted for poultry or other food products, depending on product size and process requirements. The six printer positions allow direct labeling at packing stations. Possible packing formats include: - cartons, - EPS / polystyrene boxes, - plastic crates, - tubs. The system may be integrated into a Marel Innova environment, subject to verification of the installed control and software configuration. Technical documentation available. Inspection possible by appointment. Price: on request.

Condition: good (used), The Ruhle IR56 injector, equipped with a set of 56 needles and a corresponding number of incision blades, is designed for processing various types of meat – both with and without bones, including poultry, meat and fish. Thanks to the use of advanced microprocessor control technology, it is possible to precisely regulate all process parameters, resulting in uniformity and high quality of final products. The injector allows precise dosing of brine to each needle, which increases the efficiency and accuracy of the process. Features: – individual supply of brine to each needle separately, allowing for greater precision and efficiency of injection – productivity of the machine up to 5,000kg/hour Bwsdpforwmndsx Afmjw – tenderizer – an additional bar with a system of incision knives – independent cut-off of brine supply to individual needles preventing formation of so called brine deposits when a needle hits a bone – integrated brine preparation station, the design of which excludes contact of used brine with fresh brine – 350mm wide feeding belt – 200mm product clearance The construction of the device together with the high-performance brine pump are made entirely of stainless steel Power 7.5 kW Power supply 400 V 50 Hz / 3N L: x 1600 x W: 750 x H: 2020mm Weight 750 kg

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li Bedpeh Db Hcjfx Afmjww -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, LOMA IQ3 | Metal Detector Manufacturer: LOMA SYSTEMS Model / Type: IQ3 Metal Detector Serial Number: QPB55-15-32664D Year of Manufacture: 2016 Power Supply: 110-240 V | 1 phase | 50/60 Hz Current Consumption: 0.5 - 10 A Working Width: 250 mm Dimensions: 2200 x 500 x 100 mm The Loma IQ3 professional metal detector is one of the most reliable and technologically advanced solutions in the field of product inspection and quality control on production lines. The device has been designed to meet the stringent requirements of the food sector, particularly for meat, poultry, and fish processing plants, bakeries, and catering and ready-meal companies. Operating on the basis of advanced digital signal analysis, the detector effectively identifies and eliminates metal contaminants – both ferrous (Fe) and non-ferrous (Non-Fe), as well as hard-to-detect stainless steel (SS) – protecting consumers and expensive processing machinery from damage. Bjdpfszagkujx Afmsww The detector is equipped with an intuitive automatic product learning system ("Auto-Learn"), which allows for quick and precise calibration for a specific type of product (e.g., fresh meat, cheese, bread, finished products), taking into account the so-called product effect, which often generates false alarms in cheaper devices. The conveyor belt, with an optimal length of 2200 mm and a belt width of 500 mm, allows for smooth transport of products in bulk and in single or bulk packaging directly after the packaging process.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, MAJA SKINNY | Automatic skinning machine / strip defatting machine Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model / Type: SKINNY Serial number: 43188 Year of manufacture: 2001 Power supply: 400 V, 50 Hz, 3~ (three-phase), 2.2 A Power: 0.75 kW Overall dimensions: 1200 x 800 x 1200 mm Bwodpfoz S Rg Iox Afmew Length of conveyor belt: 3700 mm The MAJA SKINNY is a professional, automatic strip skinning machine from the renowned German manufacturer MAJA, designed for the quick and precise removal of skin and defatting of meat products (including pork, beef, and poultry). The device is widely used in meat processing plants, butcher shops, cutting rooms, and food processing facilities focused on continuous performance and high-quality finished products. The use of an automatic strip feeding system ensures a continuous flow of raw material, which significantly increases efficiency compared to manually operated devices and guarantees the highest level of operator safety. The cutting mechanism precisely separates the skin from the meat without excessive loss of valuable raw material, allowing for optimal processing profitability.

Condition: used, We offer a used brine mixing system from Schröder Maschinenbau GmbH designed for preparing brines used in meat processing and food production. The system is designed for fast and efficient mixing of brines, including those with high levels of dry solids such as salt, phosphates, spices, processing aids, and functional ingredients. The system consists of two tanks—a preparation tank and a storage tank. This configuration allows for the simultaneous preparation of a new batch of brine and the storage of the finished mixture for further processing. The system is equipped with two high-performance pumps, analog control of the brine preparation process, and a cooling system that helps maintain the proper temperature of the mixture. Schröder brine mixer units enable the rapid production of a homogeneous brine, which is crucial for subsequent production stages such as injection, massaging, curing, and marinating. Properly prepared brine ensures the uniformity of the production process, production consistency, and the quality of the final product. The system can be used in meat processing plants, poultry processing plants, and facilities producing cold cuts, hams, cured products, marinated products, and other items requiring brine preparation prior to injection or massaging. Schröder Maschinenbau GmbH – a brine mixing system with 2 tanks, consisting of: brine preparation tank finished brine storage tank two high-capacity pumps brine mixing and circulation system analog process control panel brine cooling system piping and process valves stainless steel structure connections to the downstream process Technical Specifications: Manufacturer: Schröder Maschinenbau GmbH Equipment Type: brine mixing system Year of Manufacture: 2001 Number of Tanks: 2 Tank Types: preparation and storage Bedpszhwkmjfx Afmeww Number of Pumps: 2 Control: analog Cooling System: yes Power Supply: 400 V Frequency: 50 Hz Power: 4 kW Rated current: 9 A Compressed air: 8 bar Length: 2400 mm Width: 1400 mm Height: 2400 mm Key advantages: rapid preparation of homogeneous brine capability to process large amounts of dry matter two tanks—a preparation tank and a storage tank two high-performance pumps brine cooling system analog process control Stable preparation of brine for injection and massaging Improved repeatability of the production process Positive impact on the quality of the final product Stainless steel construction Renowned manufacturer Schröder Maschinenbau GmbH

Condition: good (used), Year of construction: 2011, Metalbud Nowicki MH-75 SAS Multi-Needle Injector Metalbud Nowicki supply a range of injectors with a SAS SYSTEM  Produces greater control of injection process.  SAS SYSTEM Meat Injectors are intended to implement the most complex processes of injection.The Metalbud Nowicki MH-75 SAS Multi Needle Injector is suitable for meat muscles and elements of red meat with bone or boneless, poultry and parts of white meat with bone or boneless. SAS SYSTEM advantages  High rate of repeatability throughout the operational process. Low injection rates up to 10%, as well as high injection rates up to 120%, small deviation of injection level from 0.5 to 2% high production rates in kg/h Maximum speed of injection is up to 60 cycles per minute. Injection of raw meats with different thickness without extruding brine. Allows pre-programming of injection moment, i.e. determining the layer of raw meats which will be injected and the drive of transporter is synchronised with the drive of injection head which enables many combinations of injection patterns. Multi-step filtration system Easy disassembly of injection head. Bjdow Eb S Eopfx Afmoww Manufacturer: Metalbud Nowicki Model:MH-75 SAS Year:2011 Number of needles:75 Number of heads:1 Belt Width:370 mm Max. speed of injection:60 cycles/minute Max. output:3.000 kg/h Volume of injection:5/100% Machine Dimensions LxWxH:2.650x1.900x2.100 mm Machine Weight:1.000 kg.

Condition: not inspected (used), Well maintained 7m x 1000mm thermal oil fryer, direct from closed poultry factory where it was frying chicken burgers and nuggets. Complete with top hold down belt. The hoists to lift the canopy have been lost by the storage company so these will need to be remanufactured. Machine was in lovely condition prior to being removed from the factory when it closed in 2016. Bwjdpfx Afoht T Ilemew

Condition: used, functionality: fully functional, Grasselli KSL 4 Slicer This Grasselli KSL slicer is a specially designed horizontal slicing machine for meat, poultry, fish, vegetables, and fruit. The machine can process both fresh and cooked meat and is ideal for small to medium-sized food processing operations. Bjdpfxjztxyas Afmsww The slicer combines a compact design with a high cutting capacity of up to 2,000 kg/h. It provides highly precise slicing and can process delicate products without damaging them. This horizontal slicer can be integrated into an inline production line for a fully automated production process. The hygienic design allows for quick and easy cleaning. The machine is completely manufactured from stainless steel. The product is transported to the cutting frame by means of a conveyor belt, while the pressure belt keeps the product stable as it passes through the blades. Specifications: - Production capacity: up to 2,000 kg/h - Maximum product height: 100 mm - Working width: 380 mm - Included cutting set: 5 mm - Optional cutting thicknesses: 2.5–10 mm, adjustable in 0.5 mm increments - Voltage: 400 V (3 + N, 50 Hz) - Power: 5.8 kW - Year of manufacture: 2017 - Weight: 718 kg - Compressed air connection: 7 bar - Dimensions (W x D x H): 1,490 x 1,840 x 1,350 mm

Condition: used, functionality: fully functional, Bizerba A650 Slicer The fully automatic Bizerba Scaleroline A650 slicer is a specially designed vertical slicing machine for meat, poultry, fish, cheese, and processed meats. This industrial slicer is suitable for both fresh and cooked products, making it ideal for medium-sized and large food production companies. Thanks to its integrated weighing system, products can be sliced to an exact target weight. Virtually all types of sausage, ham, and cheese can be sliced without pre-freezing, with the slices presented either shingled (overlapped) or stacked. The slicer features a generous 900 mm product feed, while its 420 mm blade can process a wide variety of products at speeds of up to 300 slices per minute. The intuitive touchscreen control panel allows users to easily program different slicing applications, enabling fast product changeovers. The machine can be flexibly deployed across various production locations and processing lines, delivering high productivity, maximum flexibility, and a rapid return on investment (ROI). Constructed entirely from stainless steel, the slicer meets the highest standards of hygiene and food safety. This professional industrial slicer is widely used in the meat processing industry, cheese production, fish processing, catering production, supermarket production facilities, and manufacturers of convenience foods and ready meals. Products that can be efficiently sliced include ham, salami, bacon, chicken breast, smoked fish, cheese slices, and other processed meat products. Technical Specifications - Production capacity: Up to 300 slices/minute - Slice presentation: Shingled (overlapped) or stacked - Product feed (W × D × H): 210 × 900 × 180 mm - Slice thickness: 0.5–50 mm - Power supply: 400 V (3 + N, 50/60 Hz) - Power consumption: 2.3 kW Bwjdpezi Tamsfx Afmjw - Weight: 507 kg - Year of manufacture: 2017 - Operating hours: 462 hours - Dimensions (W × D × H): 2,280 × 850 × 2,135 mm

Year of construction: 1996, condition: ready for operation (used), An industrial Risco double-shaft paddle mixer from a poultry farm is available. Mixing shafts: 2, nominal bowl capacity: 1300l, max. batch capacity: approx. 1300kg, drive power: 15kW, homogeneity: almost 100%, machine dimensions X/Y/Z: approx. 2600mm/1300mm/1500mm, weight: approx. 1550kg. Including a lifting and tipping device. Documentation available. An on-site inspection is possible. Bwedpfx Aoznx Hpefmjw

Year of construction: 2015, condition: used, For Sale: Variovac Primus – Year of Manufacture 2015 more photo's will follow soon, currently being serviced. We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products. Key Features - Thermoforming packaging machine - Suitable for vacuum and Modified Atmosphere Packaging (MAP) - Robust industrial design for continuous production Bodjyan D Nepfx Afmoww - Hygienic construction, ideal for food processing environments - User-friendly control system - Proven Variovac quality and reliability Applications - Meat and poultry - Cheese and dairy products - Fish and seafood - Ready meals and convenience foods - Other food and non-food products requiring high-quality packaging Condition - Year: 2015 - Good working condition - Professionally maintained - Available for inspection by appointment Advantages - High packaging quality with consistent results - Durable German engineering - Suitable for medium to high production volumes - Easy integration into existing production lines 📍 Location: Available from stock 🚚 Worldwide transport possible upon request For more information, specifications, pricing, or to arrange a viewing, please contact us. More photos and full specifications: / * Year: 2015

Condition: excellent (used), Year of construction: 2022, Provisur AM2C Beluga SD1830 separator features cutting-edge separation technology combined with a low RPM, single screw feed system, ensuring delicate handling of raw materials. It provides a high-quality, ground product while keeping the fibers and textures intact. Bwsdpoth Ufwjfx Afmsw The final product is of high quality. Controls are mounted directly on the machine for easy access. The design has a small footprint, saving space. Machine has a versitile operation and can work with red meat, poultry, pork, fish, fruits, vegetables etc. Technical features: Gentle handling – Low calcium (

Condition: new, Year of construction: 2026, Boleto Fish Gutting Machines for species such as: Trout, Mackerel, Arctic Char, Sea bream, Sea bass or Herring is simple and solid in construction. Bwedpfx Aoc Tgnyofmow The Fish gutting machine is plain and strong constructed. It is easy to operate, and maintenance can be carried out by the operator, i.e. no extra costs are involved to outside assistance. Also the maintenance costs are very low. The machine is made to order and built, according to customers information about type and size of fish to be gutted. Thus optimum reliability is obtained, and less than 0,5 % fish is damaged during the gutting process. Stainless steel is used, throughout ensuring easy cleaning and long life of the machine. The machine has CE approval, and is equipped with all necessary safety guards and emergency switches to ensure maximum operator safety. Also the operator’s position is ergonomically correct, both when placing fish on the hooks and when reaching for the control board. Installation and running are carried out by Boleto. Instruction manual and spare parts list are delivered together with the machine. Technical Data: Compressed air (operation): Min. 6 bar Compressor: Min. 2 KW Power supply: 380v, 50Hz Total weight: 350 kg Material: Stainless steel AISI 304 Capacity: Up to 50 fish/min, adjustable speed. Total machine width: 600mm Fish size from 150g to 1200g, based on 3 models.

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts Bwsdpfxegmbtqs Afmew  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Condition: used, The Multivac C 450 is an efficient, double-chamber vacuum packaging machine designed for both food and non-food products. The double-chamber system enables continuous packaging, ensuring high efficiency and productivity. This machine is suitable for packaging a wide range of products, including meat, fish, poultry, game, cheese, nuts, vegetables, and fruit. It is ideal for medium-sized and large companies with medium-scale production requirements. The machine is equipped with a vacuum sensor and a gas flushing system (MAP – Modified Atmosphere Packaging). This compact, mobile vacuum packaging machine features two chambers, each equipped with two 450 mm sealing bars. Its hygienic design allows for quick and easy cleaning, saving valuable time. The user-friendly touch-button control panel allows different packaging programs to be easily configured. The machine is entirely made of stainless steel. Technical Specifications: - Manufacturer: Multivac - Model: C 450 - Type: Double-chamber vacuum packaging machine - Vacuum pump: Rietschle - Vacuum pump capacity: 140 m³/h - Sealing bar length: 450 mm - Number of chambers: 2 Bwedpfe Aa Rcqex Afmew - Sealing bars: 4 (2 per chamber) - Gas flushing system: Yes - Vacuum sensor: Yes - Construction: Stainless steel - Mobility: Mobile, mounted on wheels - Voltage: 400 V (3+N, 50 Hz) - Power: 5 kW - Weight: 385 kg - Chamber dimensions (W × D × H): 450 × 620 × 170 mm - Overall machine dimensions (W × D × H): 1240 × 950 × 1050 mm

Condition: excellent (used), Year of construction: 2016, The NovaMax660 is the next generation of advanced slide-plate forming technology. This state-of-the-art servo driven system is suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high volume processors forming popular products such as burger patties, pork sausage, chicken filets and chicken nuggets. The high throughput and reduced cost of ownership will assure a rapid return on your NovaMax660 investment. Bedpovl Evvofx Afmeww Forming Style: Slide plate Typical Throughput*: 9,000 lbs/hour | 4,082 kgs/hour Line Width: 660 mm Speed: Standard speeds of 25-100 strokes/min (SX up to 120 strokes/min) Feed hopper Capacity: 1,100 lbs | 500 kg

Condition: excellent (used), Year of construction: 2018, Stork / Marel AMF Filleting Line AMF-i Professional Chicken Breast Filleting Line – High Efficiency and Precision We offer a complete Marel / Stork AMF-i filleting line, tailored for modern poultry processing plants. This system provides automatic and precise filleting of chicken breasts while ensuring maximum throughput and superior end-product quality. Key Benefits: Intelligent Filleting (Adaptive Filleting) The system automatically adjusts its settings to the size of the raw material, guaranteeing high-quality results and optimal yield regardless of product dimensions. High Production Efficiency Processes up to approximately 60 fillets per minute – an ideal solution for large-scale operations. Consistent Quality and Maximum Yield Losses are minimized, and efficient recovery of by-products (tendons, skin, meat) is ensured. Modular Design The line can be configured and expanded to meet individual production requirements. Process Automation Manual labor is significantly reduced, increasing consistency and process repeatability. Included Components: - Loader module Bwedpfex Hymdjx Afmow - Filleting line with integrated measuring system (encoder) - Skinning module - Splitting module with automatic adjustment - Separation module - Tendon collection system - Original control cabinet Technical Specifications: Model: AMF-i Manufacturer: Stork / Marel Year of Manufacture: 2018 Capacity: up to 3,600 fillets/hour Condition: Very good / ready for operation Type: Chicken breast filleting line STORK / MAREL / AMF / FILLETING LINE / CHICKEN BREAST