Used Liquipoint T Ftw 31 for sale (72,041)

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sanding machine, equipped for wet sanding, with 2 top-mounted sanding units and one brush unit (Scotch-Brite). The machine is used for surface finishing of metal parts with a width of up to 450 mm. The dust collection container with filter fabric is located at the bottom. Technical drawings, operating manual, and the CE declaration are available. The machine will be delivered in good, partially refurbished condition. Dcsdpfx Aeyn E H Rjqvsp Further technical information can be found in the document.

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg Dcodpfxjzbvhfs Aqvsp In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm Dcedpfx Aqoz Sthuevep - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-J0001

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Dsdpo Ah Etyefx Aqvjcp Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 1 of Auction 3516

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines). Dcedpjzr N E Dsfx Aqvep

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 Dodpfx Aszr Nuroqvecp • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 200x3100, control type: CNC control, actuation type: hydraulic, controller manufacturer: Bystronic, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 215 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, overall weight: 12,000 kg, number of support arms: 4, pressing force: 200 t, working range: 3,100 mm, Equipment: CE marking, documentation/manual, emergency stop, lower tooling, safety light barrier, upper tooling, Used High quality / very good condition Bystronic Xpert 3metre x 200ton cnc pressbrake for sale Bystronic Beyeler Xpert 200×3100 Make: Bystronic Model: Xpert 200 Year / new: 2008 Total axis: 8 – 6axis back gauge X1 X2 R1 R2 Z1 Z2 Hydraulic upper and lower tool clamping Tool stacking system Crowning Free standing no pit required Capacity / bed size / tonnage: 3metre x 3100mm x 200ton Fully serviced with Bystronic Uk General Information: Model: XPERT2000x3100 Manufactured: 2008 Specification: Dedpevua Ifsfx Aqvscp Working length mm 3100 press force kN 2000 stroke mm 215 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weigh 12,000kg

Condition: used, Round sieve - weight: 780 kg Dcsdpfx Aqjvv Eb Hjvsp - manufacture: Bühler - model: DFDT-31 - year of production: 2005 - capacity: 8-10 t/hour

Condition: excellent (used), Year of construction: 2017, Ref:11159 . 2017 GP2 Technologies SC3-31 Autocase Fully integrated automatic case making system designed for hardcover and rigid case production with minimal manual input. Process: The operator places the cover material onto the G‑2 gluer, which automatically feeds it and applies adhesive, then positions the boards and spine onto the glued cover. The SC‑3 system then takes over, automatically feeding the case inward, trimming corners, wrapping and folding each side, and pressing the boards to the case material. All functions are controlled via a touchscreen interface, providing intuitive setup and consistent results. Features: Fully automatic case making with minimal operator intervention. G‑2 Gluer with Automatic Viscosity Control for consistent adhesive application. Automated corner trimming and side wrapping for clean finished cases. Integrated pressing system for accurate board bonding. Tablet touchscreen for centralized control and streamlined operation. Reliable, repeatable case alignment and finish quality. Specification: Dedpfoz H Rgvjx Aqvscp Case Size Range: Height: 168.1–406.4 mm Width: 218.9–660.4 mm (up to 711.2 mm without corner trimmer option) Board Thickness: 1.52–3.18 mm (padded board up to ≈6.35 mm) Spine Width: 6.35–82.55 mm Operating Speed: Up to 300 cycles per hour.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, HEIDENHAIN iTNC 530 CNC X-AXIS TRAVEL: 3000 MM Y-AXIS TRAVEL: 1400 MM Z-AXIS TRAVEL (Vertical): 1500 mm Djdpfxjxvrrhj Aqvscp SPINDLE SPEED: 5000 RPM SPINDLE NOSE ATTACHMENT: SK 50 TABLE MEASURES: 3200 X 1100 MM TABLE LOAD CAPACITY: 10,000 KG 24-Place Tool Changer No. 02 Chip Conveyors Automatic Indexed Head a axis 2,5 ° b axis 3 ° YOM 2008

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Dodpfxjykkivs Aqvecp Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Year of construction: 2025, operating hours: 210 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973KZT03151, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle Dsdpfx Aqoz Hx Rcsvjcp - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.

Condition: used, empty load weight: 7,180 kg, maximum load weight: 23,820 kg, overall weight: 31,000 kg, first registration: 05/2024, loading space length: 7,500 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 18 tie-down points, 12 pocket holes for securing cargo, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic, one-piece ramps, loading height: 890 mm, including axle load indicators, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with outriggers, also available with K80 towing eye!, , -- Subject to printing errors, errors and changes, sample images --, More data can be found at: !, More Details: ! Dsdj Ah Sxiopfx Aqvjcp

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: 3050 mm Working area Y: 1250 mm Working area Z: 180 mm 9.5 kW electrospindle Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Blade for grooving in the X direction 4-position tool changer Rear 10-position tool changer Worktable with 6 rails, 6 TVN tables with suction cups 90 m³/h vacuum pump Software: Xilog Maestro Dsdpfx Aqsy Tb Ezsvscp Laser positioning device Control panel Approximate weight: 2750 kg No additional components included!

Condition: used, empty load weight: 7,480 kg, maximum load weight: 23,520 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 05/2025, loading space length: 8,000 mm, suspension: air, tire size: 235/75R17,5 -/140J, color: other, gearing type: other, front tire size: 235/75R17,5 -/140J, rear tire size: 235/75R17,5 -/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 18 tie-down points, 12 ladder rack sockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic, one-piece ramps, hydraulic ramp adjustment, loading height: 880 mm, incl. axle load indicators, -- subject to printing errors, mistakes and changes, sample images --, more data at: !, More Details: ! Dcodpfx As Adpm Asqvsp

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Dcedpfxj Aazxis Aqvep Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: 315 t Dcjdpjz Izcwofx Aqvep Table width: 1,500 mm Table length: 2,500 mm Maximum working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic unit Control panel

Condition: excellent (used), Year of construction: 1990, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min Dedpfxoz N Hxno Aqvecp back stop - adjustable 1000 mm Control ELGO TYP 85 oil volume 120 ltr. engine output 13.0 kW weight 6300 kg. range L-W-H 3950 x 1950 x 1680 mm very well-maintained condition (!!) Equipment: - Electro-hydraulic guillotine shear with guided blade movement - ELGO NC "Type 85" control unit * Front control panel, swiveling (front left) - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - NC motorized backgauge * With recirculating ball screws - 1x side gauge 2,000 mm ... with T-slot + mm scale - 2x front support arms 1,000 mm ... with mm scale - Recessed grips in the support table - Front finger guard - 1x movable foot pedal - Operating manual

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 22800 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm 2330 mm 3400 mm Dedpfsyackwsx Aqvecp 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Year of construction: 2004, condition: excellent (used), functionality: fully functional, SICA SOCKETING MACHINE BA.2F.1T. 63-315 Application: KG-U PVC pipes, Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of manufacture: 2004 1 socket per cycle Socket tool: 160x4.6 Dedsxiy Nuopfx Aqvjcp The socketing machine is in very good condition, still in operation, and will be removed from production in 3-4 months.

Condition: used, Year of construction: 2020, CNC machining center Manufacturer: Format4 Type: Profit H08 21.31P Year of manufacture: 2020 Technical data - Operating hours: Less than 500 hours - Working area: X 3,090 mm / Y 2,100 mm / Z 85 mm - Main spindle (3 axes): 10 - 12 kW, depending on the original configuration - Spindle speed: 1,000 - 24,000 rpm - Tool holder: HSK-F63 - Automatic tool changer: Linear tool magazine with 15 positions - Drilling unit: Vertical drilling head DH 8 with 8 independent spindles Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding. Dodpfe Af E Nvox Aqvecp

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear Dedpfezkvx Uox Aqvocp * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, working width: 3,100 mm, stroke length: 350 mm, pressing force: 100 t, working range: 3,100 mm, Used good condition Trumpf Trubend 3100 Series 3000 3metre CNC pressbrake for sale Used Trumpf Trubend 3100 B26 with extended stroke and daylight for sale 3metre x 100ton 6 axis pressbrake for sale Dcedpfxev Hru Uo Aqvjp Brand/make: TRUMPF Model: TRUBEND 3100 b26 Type: CNC hydraulic Press Brakes New 2016 Location: United kingdom Specification: Tonnage: 100ton Type: hydraulic downstroke H frame pressbrake Overall Length 3.1 m /3metre 6axis in total with a 4 axis back gauge Touch screen control Tonnage 1000Kn Stroke 350mm Brake time 46ms

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, working width: 3,100 mm, pressing force: 150 t, working length: 3,100 mm, working range: 3,100 mm, Used High Quality, Fully serviced, Very Clean Bystronic 150ton x 3metre cnc pressbrake For Sale Very modern Bystronic Xpert 150/3100 8 axis 3 metre x 150 ton CNC down stroke hydraulic pressbrake for sale Bystronic – fully serviced with Bystronic uk from new Model: Xpert 150/3100 Working length 3100mm Max. press force 1500kn Max stroke 215mm 150/3100 free standing CNC Pressbrake 8axis / 8 axes: Y1 – Y2 – Z1 – Z2 – X1 – X2 - R1 - R2 Dcjdpjt Ettfsfx Aqvop Year 2018 Complete with: 1. Bystronic ByVision control 2. Upper and Lower Bystronic Tooling as per photos 3. Hydraulic upper and lower tool clamping 4. 6 axis back gauge 5. Crowning 6. No pit required

Condition: excellent (used), Year of construction: 2014, Used modern good condition Trumpf Trubend 3100 Series 3000 3metre CNC pressbrake for sale Used Trumpf Trubend 3100 B26 for sale 3metre x 100ton 6 axis pressbrake for sale. Brand/make: TRUMPF Model: TRUBEND 3100 b26 Type: CNC hydraulic Press Brakes New 2014 Location: United kingdom Low hours Specification: Tonnage: 100ton Type: hydraulic downstroke H frame pressbrake Overall Length 3.1 m /3metre 6axis in total with a 4xis back gauge Touch screen control Tonnage 1000Kn Dcjdpfxoqlapas Aqvep Stroke 200mm Brake time 60ms Springback max 10mm Safety distance 120mm