Used Biomass for sale (130)

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Hedpfx Asz Ik Aajkiew Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Full technical information, photographs and further documentation available on request.

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres Hodsyw I Hmspfx Akiow • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: excellent (used), Year of construction: 2023, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: WMMB848473934932, 2023 AIRTERM BIO - 500KW BOILER Complete with the following equipment 500 KW Bio Boiler 4 bar working pressure 110 degree working temperature Twig 500 Kw Biomass Burner Ultra Modern Control system 4 Meter Endress Fuel Discharge system Multi Cyclone Flue Gas Fan Boiler in perfect working condition and can be viewed at any time. Boiler is been replaced with larger boiler and will become available in September 2026 Hsdoy Ip Awjpfx Akiew

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Hsdpszhh Iiofx Akijw Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Year of construction: 2017, condition: reconditioned (used), 2 x Entrade 199kw systems are available to purchase, each approximately 145kw of heat, and 50kw of electric Two boilers available fully reconditioned. These do NOT include engines Ideal for reducing high energy costs. Hedpfsp Ayqiex Akijw Both systems available to run on woodchip or wood pellets

Condition: used, -Fuel delivery system -Biomass combustion system -Hot water boiler -Ash removal system -Flue gases primary cleaning system -Stairs and service platforms -Draft fan - Automatic control system -Chimney -Circulation system and water treatment Hsdjwfpwpspfx Akisw Main parameters and guarantee value are calculated according to fuel parameters: -Moisture 60-65 % -Ash till 8 % - Calorific value 7990 kJ/kg and 1907 kcal/kg Main parameters of the furnace 6000 K: - Maximal designed thermal output – 6.5 Mw - Maximum continuous rate – 6 MW - Furnace regulation range 20% - 100% - Volume of furnace- 31.6 m3 - Volume of combustion chamber – 24m3 - Grates area 12 m2 - Grates designed thermal load – 500 Kw/m2 - Combustion chamber designed thermal load – 250 Kw/m3 - Maximum temperature in the combustion chamber - 900°C The following kinds of biomass are accepted for combustion in the furnace: - wood chips – 100% - forest wood residues- 100% - saw dust – 100% (G15) - chunk peat – 100% - bark – 100%

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). Hodpfoz Rz Dnjx Akiew • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Year of construction: 2011, condition: used, functionality: fully functional, For sale is the complete plant technology of a biomass power plant (year of construction 2011) with an electrical output of 2.4 MW and a thermal output of 7.5 MW. The plant will only be sold as a complete package. The sale of individual components or spare parts is not possible. Hjdpjzmf Nbjfx Akisw The plant technology includes the essential technical equipment for energy generation and is suitable for reconstruction, relocation, or as an extension of existing plants. It is in good condition and can be inspected by appointment.

Condition: used, Year of construction: 2022, functionality: unexamined, 23 complete containerised pellet boiler houses for sale – 13 × Ba-120 (120 kW) and 10 × Pereko KSR 130 (130 kW), 2.86 MW in total. Price is per unit; volume pricing for 5+ units and for the complete lot of 23. Each unit is a self-contained mobile heat plant: boiler, burners, buffer tanks, plate heat exchanger, flue system and 12 m³ pellet silo in one insulated heavy-duty container. Crane it in, connect flow/return, heat on – no boiler room, no construction. BOILER - Ba-120: 120 kW, 70/90 °C, heats approx. 2,180 m² / 5,450 m³ - Pereko KSR 130: 130 kW, 57/95 °C, heats approx. 2,360 m² / 5,900 m³ - Both: 2 × ECOMAT 70 pellet burners (agro pellets / sunflower husk capable, up to 98 % combustion efficiency), turbulators in fire-tube heat exchanger, max. 1.5 bar, flue 300×300 mm, G3 connection, 230 V / 500 W, power modulation 90 % Hsdpoz Iy Ilofx Akisw - EN 303-5:2012 (MSZ EN 303-5:2013) STANDARD PACKAGE (every unit) - Heat buffer: 2 × 1,000 L insulated (Hajdu PT1000) - Expansion: 3 × 200 L pressure vessels - Heat exchanger: APV / SPX TR1-MV-16I/2 plate HX, 140 kW, 10 bar - Flue: hot-gas induced-draught fan 450 m³/h / 800 Pa, vortex-tube cyclone separator (92 %), insulated acid-resistant modular chimney, draught monitoring - Fuel: 12 m³ external double-insulated pellet silo + screw feeder to internal day hopper - Ash: Ø100 mm geared ash screw to closed external bin - Controls: manual / automatic mode, control cabinet with PC, remote monitoring & fault alerts via internet, heat meter - Container: 6 × 2.5 × 2.5 m internal, PIR sandwich panels U = 0.4 W/m²K, 6 t steel floor, crane lugs, security lock, 0.9 × 2.1 m door CONDITION Pre-owned, complete, in storage since 2022. Sold as is, where is. Inspection by appointment in Hungary. Transport and recommissioning can be arranged. Ideal for schools, clinics, municipal buildings, farms, greenhouses, worker camps and emergency / temporary district heating. Full technical documentation in English and Ukrainian available on request.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: Hjdpfx Aoz I Throkisw The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Hjdjzrzizspfx Akijw Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Hsdpfx Aezw Apgokiow Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Hjdpolx Ndljfx Akisw rotor width 450 mm

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Fuel feed Hsdpfx Aex Daw Uokiow Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm Hedpfx Aezg Dx Uskijw - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Hedpfx Aez Rwimskiow Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, - fan and exhaust and chimney system, - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Hodpfez Iq Rksx Akijw Location: West Pomeranian Voivodeship

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Hedpozt I Rujfx Akiew

Condition: excellent (used), Year of construction: 2012, Industrial wastewater flows into the reactor and is mixed with granulated anaerobic biomass in a distribution system. Organic compounds are converted into methane (biogas). Biogas is collected in the lower phase separator, creating a "gas lift." Along with the biogas, the liquid flows upwards through a riser pipe. The biogas exits the reactor in the liquid/gas separator. The water returns through a downcomer pipe to the distribution system, hence the name: internal cycle. The wastewater is treated in a second, upper chamber. Biogas from the second chamber is collected in the upper phase separator. The treated wastewater leaves the reactor, and the biogas is extracted from the reactor. Hedpfx Akjz Nc Azjiew The reactor was used in a dairy processing company and has not yet been dismantled.

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, HOWDEN KK&K TWIN CA46 steam turbine with generator – 1.6 MW – NEW NEW | Never installed | Inspected by HOWDEN in July 2026 | OEM warranty reconfirmed | Immediate availability Available for sale: an industrial HOWDEN KK&K TWIN CA46 steam turbine, complete with a synchronous electrical generator, with a maximum electrical power of 1,595 kW (approximately 1.6 MW). The machine is NEW, never installed or commissioned, stored in a closed environment, and complete according to the original HOWDEN supply. Originally intended for an industrial project that was subsequently modified, it is now available for immediate delivery, without waiting for the production time of a new unit. HOWDEN INSPECTION AND WARRANTY On July 27–28, 2026, the turbine underwent a new inspection by the manufacturer, HOWDEN, who subsequently reconfirmed the official warranty until November 22, 2027. Original technical documentation and inspection photographs are available upon request. ECONOMIC TERMS – 40% DISCOUNT Reference value of the supply: €1,500,000 CURRENT PRICE: €900,000 The 40% reduction is motivated by the company’s need to free up the space occupied by the machine, following the modification of the original industrial plans. COMPOSITION OF THE SUPPLY HOWDEN KK&K TWIN CA46 steam turbine on a skid Integrated 3-shaft gearbox Synchronous electrical generator, supplied separately Lubrication and oil control system Control, control, and protection panels Original HOWDEN regulation and safety systems MAIN TECHNICAL DATA Turbine: Double-body HP + LP configuration Controlled steam extraction between HP and LP HP inlet pressure: 16 bar(a) HP inlet temperature: 400 °C HP steam flow rate: 10,000 kg/h LP inlet pressure: 2.4 bar(a) LP outlet pressure: 0.3 bar(a) Maximum mechanical power: 1,658 kW Maximum electrical power: 1,595 kW Gearbox outlet speed: 1,500 rpm Generator: Three-phase, brushless synchronous Rated power: 1,994 kVA Voltage: 6 kV Frequency: 50 Hz Air-cooled, IC31 Parallel operation with the grid Included systems: Oil system with main and auxiliary pumps Electronic regulator SC901 Siemens SIPROTEC 5 protection panel Independent overspeed protection Steam pressure and extraction control PROFINET interface ENC-RfG simulation model MAIN APPLICATIONS Hjdpfx Ae Afhgwokiew Biomass and waste-to-energy plants Industrial cogeneration (CHP) Revamping and repowering of existing plants STATUS AND CONDITIONS OF SALE Year of manufacture: 2024 Condition: NEW, never installed or started Last HOWDEN inspection: July 2026 OEM warranty reconfirmed until 11/22/2027 Immediate availability Location: Piedmont, Northern Italy Conditions: EXW – ex works Visit and inspection of the machine by appointment PRICE: €900,000 (–40% compared to the reference value of €1,500,000) Original HOWDEN technical documentation and documentation of the latest inspection are available for interested buyers.

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, power: 55 kW (74.78 HP), Vecoplan Shredding Unit – Efficient Processing of Wood Waste The Vecoplan shredding unit is a powerful complete solution for the continuous processing of wood waste, cut-offs, strips, boards, and other wood residues into high-quality wood chips. The coordinated components ensure a consistent material flow, reliable continuous operation, and high economic efficiency. Components of the system: Vecoplan VTH 65/25/5/U Industrial Shredder (year of construction 2017) The VTH 65/25/5/U is a robust industrial shredder for continuous use in the wood industry. With its inlet opening of 650 × 250 mm and a drive power of 55 kW, it reliably and energy-efficiently processes a wide variety of wood residues. Depending on the material properties, the machine achieves a throughput of 1 to 5 tons per hour. The VTH series is characterized by high throughput rates, a robust design, and low maintenance requirements. Vecoplan VR 65/24 Vibrating Table The vibrating table with a usable area of 650 × 2,500 mm ensures a uniform material distribution and continuous feeding of the shredder. This avoids peak loads, optimizes system performance, and ensures a smooth production process. Vecoplan KKF 500-1K-U Scraper Conveyor The downstream scraper conveyor with a conveying width of 500 mm reliably transports the shredded material for further processing or storage. It is ideal for transporting wood chips, sawdust, wood shavings, and pellets and impresses with its robust industrial design. Hedpfx Akezh Ti Ejiow Advantages of the system Complete, perfectly coordinated Vecoplan system Consistent material feed through vibrating table High throughput of up to 5 t/h Robust industrial design for continuous operation Low maintenance requirements Ideal for sawmills, wood processing companies, biomass plants, and pellet production Immediately ready for use for the economical processing of wood waste.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Hjdpfx Akeztq Hxeiew Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Hodpfo Afbqvsx Akiow Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Hsdpfs Aba Rgox Akisw Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, HUNING screw conveyors – 2 vertical and 2 horizontal conveyors with 3 pneumatic slide gates For sale are four used HUNING screw conveyors for biomass conveying, as well as three pneumatic slide gates. The conveyors feature shaftless screws, stainless steel tubes, and wear-resistant linings made of RCH 1000. Vertical conveyor HUNING SPV 300 – approx. 6 m • Base length approx. 5 m with approx. 1 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Vertical conveyor HUNING SPV 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Vertical conveying, conveying angle 90° • Drive power approx. 7.5 kW Horizontal conveyor HUNING SPF 300 – approx. 7 m • Base length approx. 5 m with approx. 2 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Horizontal conveyor HUNING SPF 300 – approx. 8 m • Base length approx. 5 m with approx. 3 m extension • Horizontal conveying in tubular design • Drive power approx. 3 kW Additionally included: 3 pneumatic slide gates Package price: €27,000 net Location: Diekirch, Luxembourg. Inspection possible by arrangement. Technical specifications according to the original manufacturer's documentation. The stated overall lengths are calculated from the base lengths and the added extensions. All measurements are approximate and can be verified on-site. Hodpfoz Infxex Akisw Collection from the location. Dismantling, loading, and transport are the responsibility of the buyer.