Used Paint Drumming for sale (6,700)

Year of construction: 2020, condition: new, ROMER® is the largest producer of powder paint shops in Poland, and one of the largest in Europe. ROMER® is over 10,000 manufactured devices operating in over 45 countries around the world. ROMER® Produces single technological equipment for powder paint shops as well as complete fully automatic turnkey paint shops. Lrodpfx Aofzq Rysiger ROMER® provides heating solutions for the aero and automotive industries for the largest concerns in the world. We provide warranty and post-warranty service of the devices we sell with a full range of spare parts.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Lrsdpfx Aiefz U Nbegor Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2024, Helical washer, spiral tunnel for small parts like bolts, screws, joint and small metal parts. Industrial parts washer for mass production, ideal solution for chip and oil removal. Perfect parts washing systems for degreasing and precise cleaning. Operation Principles: Work pieces are washed rinsed and dried with detergent and pressurized hot water spray in helical conveyor tunnel. Application Areas: -Machined parts like rivets, nuts, bolts, screw etc. Lrsdpfx Ajd I E Irsigjr -Textile accessories as zip, button, snap, fastener etc. -Fittings and equipments for gas regulators, hot water pipes lines, natural gasline etc. -Sanitary Industry; fittings and armature Processes: -Spray wash -Spray rinsing -Drying All of the HELIWASHes are tailor-made and have lots of options according to your needs. Please feel free to contact us for technical details.

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Lrsdpfx Aiogabfqjgsr Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: Lredpfx Aisun R Ufsgor An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Lrodjuhvhpopfx Aiger Electrical motor 75 kW

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. Lredstu H Avjpfx Aigsr At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. Lsdpstu H Hcefx Aigjrr The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Year of construction: 2003, condition: ready for operation (used), Used drum dryer manufactured by SAFEM, extracted from a line of gluten-free products. Fluid: Steam Design pressure: 12 bar Maximum operating pressure: 9,5 bar Ljdpfx Aieq Nmuwjgorr Test pressure: 24 bar Maximum operating temperature: 192ºC Volume: 4.55 m3 Pressure x Volume: 54.6 bar x m3

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Ledpjthcflofx Aigjrr Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: good (used), Motor roller, roller motor, conveyor belt motor -Drum motor: for conveyor belt -Drum: Ø 104 mm Lodpfjb A Iqnox Aigorr -Drum length: 495 mm -Drum: rubberized -Voltage: 380 V -Groove: 18 mm -Shaft ends Ø 17 mm Double edge 13 mm -Weight: 10 kg

Year of construction: 1982, condition: used, Machining units: from 3 sides Machine has 6 stations: with a horizontal main spindle Notes: Primarily suitable for precision-bored parts, but also for armature parts and shaft parts that need to be machined from two sides. Ledpfxjcqydrj Aigorr

Year of construction: 1986, condition: used, Machining: from 2 sides 10 hydraulic drilling units: CNC-controlled, 4 kW each Quill stroke: 150 mm Tool holder: SK 40 Spindle speeds: continuously variable Note: Thread cutting on 4 drilling units can be programmed via CNC without a compensation chuck. 6 clamping stations with hydraulic 2-jaw chucks: Geiger & Haag, GH 2B-215.00 Rapid traverse speed of the units: 7 m/min Complete hydraulic system Coolant system Chip conveyor Lredpfscqyd Hex Aigor Machine was overhauled in 1993 for 100,000.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Lredpfxjiv Huwo Aigjr Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, 4 double strokes per 1 liter of material, with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, available from warehouse in Seevetal, subject to prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 23,140 kg, overall weight: 28,000 kg, axle configuration: 2 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 800 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,538 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. --- ## Chassis – 2-Axle Jumbo Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * New slightly inclined outer frame with integrated Load-Lock profile for securing lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Free landing leg corner dimension / rear swing clearance approx. 1,920 mm * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards in front of and behind each axle * Spare wheel carrier for one spare wheel, including wheel mounting kit * Lockable plastic toolbox with shelf insert, dimensions: 620 × 360 × 440 mm (W × H × D), padlock not included --- ## Axles & Suspension * Drum brake axles (manufacturer's choice) * Laser-aligned axles and running gear for reduced tyre wear and improved fuel efficiency * Air suspension --- ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified maintenance * Spring-loaded parking brake * Front Duomatic coupling without connecting hoses * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 235/75 R17.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front socket without connecting cable --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * High point-load capacity, suitable for forklift axle loads up to 5,600 kg Lodpjkv Uvzofx Aigjrr --- ## Front Wall * Front wall made of 25 mm aluminium hollow profiles, approx. 1,350 mm high * Heavy-duty steel corner posts in volume specification --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Aluminium front wall --- # Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, Year of construction: 2015, Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Lodjk Aa Swspfx Aigerr Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum (UT): Ø = 60 mm, crowned steel, galvanized Belt return roller: Ø = 50 mm, galvanized steel, A12 IGM8 Belt: 2-layer PVC belt, black, smooth Year of construction: 11/2015 Construction / Design: CNC-lasered and edged sheet steel construction primed and painted in RAL 7035, fittings electrogalvanized, side guide 1.4016 Special feature / accessories: 1x motor coupling module incl. electrical pre-installation 3x light barrier lateral guide on both sides 70-620-840 mm / 80-390 mm high 2x emergency stop switches 1x end plate 640 mm high 1x baffle plate 1x deflection drum cover Execution centerantieb All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Year of construction: 2018, condition: like new (used), Interroll 113S drum motor 800mm drive roller, 0.18Kw, 24m/min more pieces Manufacturer: Interroll Type: 113S Roller width: 800 mm Axle length: 800 mm + 2x 30 mm axle stub Lrodpfjma Rtajx Aigjr Cylinder diameter: 120 mm Flat width: 20 x 35 mm Nominal speed: vN 0.56 m/s voltage: 400v 50Hz 0.62A Nominal speed: 0.4 m/s Housing material: stainless steel Protection: IP66 Weight: approx. 15.3 kg

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Lrsdpfx Aijvv Rfkogor Contact us for more information and quotations

Condition: excellent (used), functionality: fully functional, drying rack for drying parts after painting double-sided length of shelves 780mm maximum distance 2520mm minimum distance 350mm 22 shelves bars covered with rubber mobile construction clearance between bars 115mm Ledevcb Ivepfx Aigsrr

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW Ljdpfx Asvcb U Ajigorr - 6 wire shelves included, plus V2A support brackets - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Year of construction: 1990, condition: used, Inline Drum filling - / capping machine Pos. number: LTC00005452 Make: Ocme Type: LFT300 Year of build: 1990 Range: 60 litre / 200 litre drum Frame: steel Lrjdpfx Aieh Uca Ssgsr Dimensions: L x W x H = 6.000 x 2.400 x 3.000 mm Weight: 3.500 Kg Power-supply: 3x380 Volt – 50 Hz – 1,5 kW Features: manual / automatic program filling / capping /seal applicator / screw

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Ljdpfshzbq Tsx Aigjrr Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, suction capacity: 3,900 m³/h, input voltage: 400 V, power: 1.5 kW (2.04 HP), Equipment: cabin, documentation/manual, emergency stop, lighting, dimensions without fan and control panel! Work area - dimensions (mm): 990(w)x800(d)x1100(h) Overall dimension(mm): 1100(w)x1900h)x1100(h) Technical data: - Fan power 1.5kW (ATEX) - Fan suction capacity: 4100 m³/h (max 750Pa) - Lighting: 1pc 2x18W (ATEX) - Connection voltage: 230V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Ledpfxjia Tabs Aigerr Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Lredpfjia Tauox Aigjr Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Lrjdpozdupljfx Aigjr Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡