Used Page Gate for sale (1,211)

Condition: excellent (used), Year of construction: 2020, Ref:11141. 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Specification: Max sheet size: (Portrait: 356 × 508mm) (Landscape: 267 × 610mm) Njdpfx Acezyu Ugs Aelg Min sheet size: 140 × 194mm Finished booklet size (approx): Max: 352 × 303mm Min: 120 × 85mm Typical formats: A3, A4, A5, B4, B5 Paper weight: Uncoated: 52–350 gsm / Coated: 73–350gsm Max stitch thickness: 5mm Equivalent to ~10mm booklet thickness (~50 sheets of 80gsm) Loop stitching: Max ~3mm stitch thickness Wire size: Typically 0.4 – 0.6mm (No.24–27 range) Trim width: 2 – 25.4mm Max trim thickness: 10mm Max speed: Up to 6,000 booklets/hour A4 landscape: 5,300/hour

Condition: excellent (used), Year of construction: 2020, Ref:11142 . 2020 Horizon Stitchliner Mark III L Stitchliner with A4 Landscape capability. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 24 station (1 x VAC L600Ha + 3 x VAC L600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer Nedpfx Aezyu Uyjc Aslg Specification:

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Nsdpfxjzzz Nao Ac Aelg Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, ITEC & Bobet Hygiene Gateways – Components – Custom Configurations Available from Stock. Complete solutions without the costs and long lead times of new equipment. HUVANTIS exclusively offers premium, tested hygiene infrastructure from stock clearance by industry leaders ITEC and Bobet Matériel. Why HUVANTIS? Significant Savings: A single ITEC turnstile with disinfection system currently sells for over €8,000 (new price). We offer complete systems at a fraction of this price. Immediately Available: No months-long delivery times. Available directly from stock in Büllingen (BE) / Auw (DE). Planning Included: We don’t just supply hardware. We also offer CAD-based planning for your hygiene passage (personnel flow analysis, black/white zone separation). CURRENTLY AVAILABLE CONFIGURATIONS: 1. Modular ITEC System (Configuration 1): ITEC continuous sole cleaner with turnstile Separate ITEC hand disinfection station with rotary gate ITEC touchless hand wash basin, soap dispenser & hand dryer Stainless steel guidance system (barriers & guides) Njdjy N T Rhepfx Ac Aolg Price: €3,150 net (plus VAT) 2. Compact Bobet Combo System (Configuration 2): Bobet continuous sole cleaner with integrated disinfection & turnstile ITEC hand wash basin (2 touchless taps) ITEC soap dispenser & hand dryer Stainless steel guidance system Price: €2,850 net (plus VAT) ADDITIONAL SERVICE: Custom CAD planning & consultation for your site: €800 flat fee. LOGISTICS & TERMS: Location: B-4760 Büllingen (BE) / D-54597 Auw (DE) Shipping: Europe-wide delivery by freight forwarding available on request Invoice: Official invoice with separate VAT (BE-VAT) Condition: Used, technically inspected, sold “as is” A detailed 4-page dossier with technical drawings and a list of individual components is immediately available as a PDF upon request.

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Njdpoywlifjfx Ac Aslg Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; SPF-40 Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer PK-30 Kicker Shingle delivery belt

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, paper weight (min.): 65 g/m², paper weight (max.): 300 g/m², product length (max.): 320 mm, product width (max.): 620 mm, TECHNICAL DETAILS Minimum paper size: 120 × 210 mm Maximum paper size: 320 × 620 mm Paper weight: 65–300 g/m² Booklet heads: 2 ISP booklet heads Maximum book thickness: 10 mm Maximum page count: approx. 200 pages at 80 g/m² Staples per spool: approx. 50,000 EQUIPMENT Plockmatic Morgana BM 5050s Booklet Maker VFX high-performance feeder with vacuum feeder Nledpfx Aezzp Scjc Ajg CST 5000 creasing and 2-sided trimming module for head and foot trimming FM 5000 finishing module for front trimming BEST 4000-1 extended conveyor stacker Anti-static kit for VFX feeder Anti-static kit for CST 5000

Year of construction: 2023, condition: as good as new (ex-display), Feeder Nlsdjt D E Aijpfx Ac Ajg Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H Nodpfx Acjurf Twj Aelg With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: like new (used), Year of construction: 2020, load capacity: 800 kg, lifting height: 1,880 mm, construction height: 1,380 mm, operating hours: 661 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V Mast: 2W1880 ID: 24091.5051 Category: Demo Mast: 2W Lowered height: 1380 mm Lifting height: 1880 mm Capacity: 800 kg Platform height: 1200 mm Order picking height: 2800 mm Init.: Yes Year: 2020 Operating hours: 661 h Battery capacity: 24 V / 500 Ah Nljdpfx Aezv Rykec Ajg Options: SAFETY gates! Complete, LIKE NEW!

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Nljdpfszv Rz Uox Ac Ajg Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, Nsdpsy Hixvsfx Ac Aslg integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: good (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 13.645, pressing force: 38 t, total width: 2,500 mm, total height: 2,500 mm, total length: 6,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 14,700 kg, empty load weight: 4,700 kg, year of last overhaul: 2023, Avermann MPC16PE compaction container – fully overhauled in 2023 – double hook connection – drop gate For sale: Avermann MPC16PE compaction container with a capacity of 16 m³. This machine was fully overhauled by us in 2023. During the overhaul, the compaction container was completely inspected technically and subsequently blasted and repainted in RAL 7016 anthracite gray. As a result, the machine is in very good condition both technically and visually. The compaction container has a double hook connection, allowing it to be lifted from both sides. In addition, the machine is equipped with a drop gate, making this model particularly suitable for processing wet waste and other moist waste streams. Due to its robust construction, a load capacity of 10,000 kg, and its practical design, this compaction container is very suitable for, among others, industry, manufacturing companies, the food industry, hospitality, waste processing, and recycling. Technical specifications: Brand: Avermann Type: MPC16PE Machine number: 13,645 Overhaul year: 2023 Capacity: 16 m³ Power supply: 400 V Nlsdpfxjz Ephcj Ac Ajg Power: 5.5 kW Fuse: 25 A slow-blow Own weight: approx. 4,700 kg Maximum load weight: 10,000 kg Color: RAL 7016 anthracite gray Double hook connection Equipped with a drop gate Suitable for hooklift transport Very suitable for wet waste / moist waste streams Details: The machine was completely overhauled, blasted, and repainted in 2023. During this process, the compaction container was technically inspected and reassembled in excellent condition. A very neat and well-executed compaction container for companies looking for a professional, overhauled machine without the investment of a new compaction container. Inspection and testing are possible by appointment. Please feel free to contact us for more information, prices, or technical questions. Keywords: Wortmann, Avermann, MPC16PE, MPC16, compaction container, 16 m³ compaction container, waste compactor, container compactor, wet waste, drop gate, double hook connection, waste compaction, recycling, compactor, overhauled compaction container.

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Nljdpfx Acoz Ehfas Aeg Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Nsdoz Ernlopfx Ac Aslg Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1999, Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional Nedpfx Acomqty He Aolg conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Nlodpeugmwlsfx Ac Aeg

Condition: used, Year of construction: 2001, Transnorm belt conveyor belt conveyor 1300-700-600 gate passage RA2234 Technical data: Manufacturer: Transnorm Year of manufacture: 2001 Condition: good (used) Motor: fully functional conveying length (FL): 1300 mm nominal/outer width (NB): 700 mm 900 with barings and Motor belt width (GB): 600 mm overall height (BH): 85 mm motor height (MH): 450 mm Motor type: SEW geardrive, W20DT63L4 Motor power: kW 0,25 230/400 V 50Hz Conveying speed: contact us Scope of delivery: one support Optional: Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Nlodpferi Sndex Ac Aog Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Machine Security Fencing Dimensions approx 3000mm x 4000mm Nodopy Ei Uepfx Ac Ajlg Complete with entry gates

Condition: new, New Conveyor with overhead feeder hopper Nljdpfjwd Nthex Ac Aog Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive

Condition: used, Stainless steel knife gate valve Diameter 150 mm Made entirely of stainless steel 2 units in stock See our other listings Nljdpfsx Nykbsx Ac Aog VMA Wekerom

Condition: good (used), Industrial - swing gate 8 x 2 m Dimensions per gate side width ca. 395 cm height approx. 220 cm struts diameter: 2 cm Nsdek Shidspfx Ac Ajlg Galvanized steel barbed wire holder climbing over protection Item condition: used Further articles - new and used - you can find in our store! International shipping costs on request!

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Nledpfx Asziciwoc Ajg Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Year of construction: 2014, condition: excellent (used), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine number: 807705-10 Year of manufacture: 05/2014 Power supply: 400 V, 3 phase Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Equipment: - Hygiene gate with turnstile - Sole cleaner Nodpfxex I Nvks Ac Aolg - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines sole cleaning, hand disinfection, and access control via a turnstile, effectively preventing contaminants from being carried into production areas. Its robust construction and fully automatic hygiene process ensure high cleaning and disinfection efficiency as well as easy, intuitive operation. The station is designed for intensive use in meat processing plants, food production facilities, and other environments with strict hygiene requirements.

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible. Nlsdezi Svmopfx Ac Asg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Nlsdoztl Scepfx Ac Aeg Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)